G 10SF2 - Angle Grinder HITACHI - Free user manual and instructions
Find the device manual for free G 10SF2 HITACHI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Angle Grinder |
| Brand | Hitachi |
| Model | G 10SF2 |
| Disc Diameter | 115 mm (4-1/2 in) |
| Power Input | 840 W |
| No-Load Speed | 11,000 rpm |
| Spindle Thread | M14 |
| Weight | 1.8 kg (4.0 lbs) |
| Dimensions (L x W x H) | 260 x 70 x 130 mm |
| Power Cord Length | 2.5 m |
| Switch Type | Lock-off slide switch |
| Spindle Lock | Yes |
| Side Handle | Included (adjustable) |
| Guard | Adjustable wheel guard |
| Double Insulation | Yes |
| Vibration Level (typical) | < 2.5 m/s² |
| Sound Pressure Level | 80 dB(A) |
| Maintenance | Regular brush inspection and replacement; clean ventilation slots |
| Spare Parts Availability | Carbon brushes, switch, guard, side handle, spindle |
| Application | Grinding, cutting, sanding (with appropriate accessories) |
| Safety Features | Lock-off switch, guard, spindle lock, anti-vibration handle |
Frequently Asked Questions - G 10SF2 HITACHI
How do I change the grinding disc on the Hitachi G 10SF2?
First, unplug the grinder. Press the spindle lock button and rotate the disc until it locks. Use the supplied wrench to loosen the flange nut. Replace the disc and tighten the nut firmly.
What is the correct disc size for this angle grinder?
The Hitachi G 10SF2 uses 115 mm (4-1/2 inch) discs with a 22.2 mm bore. Ensure the disc is rated for at least 11,000 rpm.
How do I adjust the guard?
Loosen the guard adjustment lever, rotate the guard to the desired position (ensure it covers the operator's hands), then tighten the lever securely.
When should I replace the carbon brushes?
Replace the brushes when they are worn to less than 6 mm in length, or if the grinder sparks excessively. Both brushes should be replaced at the same time.
Can I use the grinder for cutting metal?
Yes, you can use a cutting wheel designed for metal. Ensure the wheel is rated for the grinder's speed and that the guard is positioned correctly for cutting.
Why does my grinder vibrate excessively?
Excessive vibration may be due to a worn or unbalanced disc, a loose side handle, or damaged bearings. Check the disc condition and tighten all components.
How do I clean the grinder after use?
Unplug the grinder and wipe the exterior with a dry cloth. Clean the ventilation slots with compressed air to prevent dust buildup.
Is the Hitachi G 10SF2 double insulated?
Yes, it has double insulation, so it does not require a ground wire. However, always use a properly functioning power outlet.
What is the spindle thread size?
The spindle thread is M14, which is standard for most 115 mm angle grinders. Accessories must have matching threads.
Can I use a wire brush wheel on this grinder?
Yes, you can use a wire brush cup or wheel with an M14 thread. Ensure the brush is rated for the grinder's speed and use the proper guard for wire brushes if needed.
User questions about G 10SF2 HITACHI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Angle Grinder in PDF format for free! Find your manual G 10SF2 - HITACHI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. G 10SF2 by HITACHI.
USER MANUAL G 10SF2 HITACHI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HITACHI
Model : G 10SF2
Category : Angle Grinder