Concerta2 B10 - Subwoofer Revel - Free user manual and instructions
Find the device manual for free Concerta2 B10 Revel in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Powered Subwoofer |
| Driver Size | 10 inches (250 mm) |
| Amplifier Power | 250 watts RMS |
| Frequency Response | 27 Hz - 150 Hz (±3 dB) |
| Dimensions (H x W x D) | 380 x 330 x 380 mm (15.0 x 13.0 x 15.0 in) |
| Weight | 15.4 kg (34 lbs) |
| Enclosure Type | Bass reflex (ported) |
| Inputs | RCA line level, LFE input, speaker level |
| Outputs | RCA line level (thru) |
| Controls | Volume, crossover frequency (40-150 Hz), phase (0/180°) |
| Auto On/Off | Yes, signal sensing |
| Power Requirements | 100-240 V AC, 50/60 Hz |
| Finish Options | Black gloss, white gloss |
| Grille | Magnetic detachable grille |
| Warranty | 5 years (parts and labor) |
| Recommended Placement | Front wall, corner or along side wall |
| Package Contents | Subwoofer, power cord, owner's manual |
Frequently Asked Questions - Concerta2 B10 Revel
How do I connect the Concerta2 B10 subwoofer to my AV receiver?
Use an RCA cable from the subwoofer output (LFE) of your AV receiver to the LFE input on the subwoofer. Also connect the provided power cord.
What is the best crossover frequency setting?
Set the crossover on your AV receiver to around 80 Hz. On the subwoofer itself, set the crossover control to its maximum (150 Hz) to let the receiver control the crossover.
Should I use the 0° or 180° phase setting?
Try both settings and listen for the fullest, most impactful bass. Typically, if the subwoofer is placed near the front speakers, 0° works well; if placed behind you, 180° may integrate better.
How do I clean the subwoofer cabinet?
Wipe the cabinet with a soft, dry cloth. For stubborn marks, slightly dampen the cloth with water and mild soap. Avoid abrasive cleaners.
The subwoofer does not turn on automatically. What should I check?
Ensure the power switch is set to 'Auto' or 'On'. Check that the trigger signal (if used) is present. If the input signal is weak, increase the subwoofer volume on your receiver.
Can I place the subwoofer inside a cabinet or behind furniture?
It is not recommended as it may obstruct the port and reduce bass output. Keep at least 6 inches (15 cm) of clearance around the subwoofer.
What is the difference between the LFE and RCA line inputs?
The LFE input bypasses the subwoofer's internal crossover and uses the receiver's crossover. The RCA line inputs use the subwoofer's internal crossover for when connecting to a stereo preamp.
Why does the subwoofer make a humming noise?
A ground loop hum may occur. Ensure all components share the same electrical circuit. Use a ground loop isolator if necessary.
How do I reset the subwoofer to factory settings?
There is no user reset. Simply adjust all controls (volume, crossover, phase) to their default positions: volume at 12 o'clock, crossover at 80 Hz, phase at 0°.
What is the warranty period for the Revel Concerta2 B10?
Revel offers a 5-year warranty on parts and labor from the date of purchase. Registration may be required.
User questions about Concerta2 B10 Revel
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual Concerta2 B10 - Revel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Concerta2 B10 by Revel.
USER MANUAL Concerta2 B10 Revel
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Revel
Model : Concerta2 B10
Category : Subwoofer