EV2M-R - Multimeter Vemer - Free user manual and instructions
Find the device manual for free EV2M-R Vemer in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Multimeter |
| Brand | Vemer |
| Model | EV2M-R |
| Dimensions (approx.) | 150 x 70 x 30 mm |
| Weight (approx.) | 200 g |
| Power Supply | 9V battery (6F22) |
| DC Voltage Range | 200 mV to 600 V |
| AC Voltage Range | 2 V to 600 V |
| DC Current Range | 200 µA to 10 A |
| Resistance Range | 200 Ω to 20 MΩ |
| Additional Functions | Continuity test, diode test, hFE transistor test |
| Display | LCD, 2000 counts |
| Safety Rating | CAT II 600 V |
| Overload Protection | PTC fuse for resistance and continuity |
| Auto-Ranging | Yes |
| Backlight | Yes |
| Data Hold | Yes |
| Low Battery Indicator | Yes |
| Accessories Included | Test leads, battery, user manual |
| Maintenance | Clean with dry cloth; replace battery when low |
| Spare Parts Availability | Test leads and battery available from Vemer or authorized retailers |
Frequently Asked Questions - EV2M-R Vemer
How do I measure DC voltage with the Vemer EV2M-R?
Turn the rotary switch to the DCV range. Insert the black test lead into the COM jack and the red lead into the VΩmA jack. Connect the probes across the circuit. Read the voltage on the display.
What does the continuity beep indicate?
A continuous beep indicates a low resistance (typically <50 Ω) between the probes, meaning the circuit is complete or the wire is good.
How do I replace the battery?
Remove the back cover screws, replace the 9V battery (6F22) ensuring correct polarity, and reattach the cover.
Is the EV2M-R auto-ranging?
Yes, it automatically selects the appropriate range for voltage, current, and resistance measurements.
Can I measure AC current with this multimeter?
Yes, select the ACA range (if available). For currents above 200 mA, use the 10A jack. Always observe safety precautions.
What is the maximum voltage this multimeter can measure?
The maximum DC voltage is 600 V, and AC voltage is 600 V. Do not exceed these limits.
How do I test a diode?
Set the rotary switch to the diode symbol (→+). Connect the black lead to COM and red to VΩmA. Touch the red to anode and black to cathode. A forward voltage drop (0.4-0.7V for silicon) indicates a good diode.
Why does the display show '1' or 'OL'?
This indicates an overload or open circuit. The measured value exceeds the range (if not auto-ranging) or the probes are not connected properly.
What safety precautions should I take?
Use the multimeter only on circuits within its ratings (CAT II 600V). Inspect test leads for damage before use. Do not measure voltages above 600V. Remove test leads before changing functions.
How do I clean the multimeter?
Wipe the exterior with a dry, soft cloth. Do not use solvents or water. Keep the input jacks clean and free of debris.
User questions about EV2M-R Vemer
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Multimeter in PDF format for free! Find your manual EV2M-R - Vemer and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EV2M-R by Vemer.
USER MANUAL EV2M-R Vemer
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vemer
Model : EV2M-R
Category : Multimeter