UNI-200 - Battery charger ANSMANN - Free user manual and instructions
Find the device manual for free UNI-200 ANSMANN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Battery Charger |
| Brand | Ansmann |
| Model | UNI-200 |
| Compatible Battery Types | Ni-MH, Ni-Cd (AA, AAA, C, D, 9V) |
| Charging Channels | 4 independent slots |
| Input Voltage | AC 100-240V, 50/60Hz |
| Output Voltage | 1.2V – 9V adjustable per slot |
| Charging Current | 200 mA (AA), 100 mA (AAA), 500 mA (C/D), 50 mA (9V) |
| Discharge Function | Yes, to refresh batteries |
| Automatic Trickle Charge | Yes, after full charge |
| Polarity Protection | Reverse polarity detection |
| Short-Circuit Protection | Yes |
| Overcharge Protection | Individual -ΔV cut-off |
| LED Indicators | Per slot: red (charging), green (ready) |
| Dimensions (L x W x H) | 120 x 70 x 40 mm |
| Weight | 200 g |
| Power Cable | Detachable IEC C7 (figure-8) |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Maintenance | Wipe with a dry cloth; do not use solvents |
| Repairability | Replaceable internal fuse (5A, 250V) |
| Certifications | CE, RoHS |
Frequently Asked Questions - UNI-200 ANSMANN
What battery types are compatible with the ANSMANN UNI-200?
The UNI-200 charger supports Ni-MH and Ni-Cd rechargeable batteries in sizes AA, AAA, C, D, and 9V (PP3).
How long does it take to charge AA batteries?
Charging time for AA batteries (2000 mAh) is approximately 10-12 hours at the standard charge current of 200 mA. Higher capacity batteries may take longer.
Can I charge different battery types at the same time?
Yes, each of the four slots operates independently, so you can charge different sizes and capacities simultaneously, as long as they are Ni-MH or Ni-Cd.
What do the LED indicators mean?
A solid red LED indicates charging is in progress. A solid green LED signals that the battery is fully charged and the charger switches to trickle maintenance mode.
Does the charger have overcharge protection?
Yes, the UNI-200 features individual -ΔV detection to automatically stop charging once the battery reaches full capacity, preventing overcharging.
Can I charge 9V batteries in this charger?
Yes, the UNI-200 has dedicated slots for 9V batteries. The charging current is 50 mA, and the charger automatically detects the correct voltage.
What happens if I insert a battery with reversed polarity?
The charger includes reverse polarity protection. If a battery is inserted incorrectly, the charger will not start charging and the LED will remain off or flash.
Can I use the charger while traveling?
Yes, the UNI-200 operates on 100-240V AC worldwide. You only need a country-specific plug adapter if the mains outlet shape differs.
How do I clean the charger?
Disconnect the charger from the mains, then wipe the casing with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners.
Is the charger repairable if it stops working?
The internal fuse is user-replaceable (5A, 250V, 5x20mm). For other issues, contact Ansmann support or a qualified technician.
User questions about UNI-200 ANSMANN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Battery charger in PDF format for free! Find your manual UNI-200 - ANSMANN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UNI-200 by ANSMANN.
USER MANUAL UNI-200 ANSMANN
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ANSMANN
Model : UNI-200
Category : Battery charger