FZP 2105-E - Saw Fieldmann - Free user manual and instructions
Find the device manual for free FZP 2105-E Fieldmann in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Chainsaw |
| Model | FZP 2105-E |
| Brand | Fieldmann |
| Power Source | Electric (230 V, 50 Hz) |
| Motor Power | 2100 W |
| Bar Length | 40 cm (16 inches) |
| Chain Speed | 14 m/s |
| Chain Pitch | 3/8 inches |
| Chain Gauge | 1.1 mm |
| Oil Tank Capacity | 200 ml |
| Weight | 4.8 kg |
| Dimensions (L x W x H) | 78 x 25 x 25 cm |
| Safety Features | Chain brake, hand guard, kickback protection, safety switch |
| Vibration Level | 5.5 m/s² |
| Sound Pressure Level | 96 dB(A) |
| Maintenance | Regular chain sharpening, oil refill, air filter cleaning |
| Spare Parts Availability | Chain, bar, sprocket, oil pump, filter available |
| Warranty | 2 years |
Frequently Asked Questions - FZP 2105-E Fieldmann
How to sharpen the chain on the Fieldmann FZP 2105-E?
Use a round file of appropriate diameter (typically 4.8 mm). Ensure the chain is tensioned properly and file each tooth at a 30° angle. Lubricate the chain after sharpening.
What type of oil should I use for the chain?
Use a biodegradable chainsaw bar and chain oil. Do not use used or contaminated oil, as it may damage the chain and bar.
How to tension the chain on the FZP 2105-E?
Loosen the bar nuts, adjust the tension screw until the chain fits snugly against the bar with no sag, then tighten the nuts. The chain should still be movable by hand.
Why does the chainsaw stop during operation?
Possible causes: the chain brake is engaged, the motor is overheated, or the power supply is interrupted. Check the brake and let the saw cool down.
Can I use the chainsaw for cutting metal?
No, the Fieldmann FZP 2105-E is designed for cutting wood only. Using it on metal can damage the chain and cause kickback.
How often should I clean the air filter?
Clean the air filter after every 5 hours of use or more frequently in dusty conditions. Use a soft brush or compressed air.
What is the correct way to start the chainsaw?
Ensure the chain brake is engaged, then press the safety switch and the trigger. Let the saw run at idle for a few seconds before cutting.
How to replace the bar and chain?
Remove the bar nuts, lift off the old bar and chain. Install the new bar and chain, adjust tension, and tighten nuts. Ensure the chain rotates in the correct direction.
What should I do if the chain jumps off the bar?
Stop the saw immediately. Check chain tension and alignment. Inspect the bar for wear or damage. Reinstall the chain and tension properly.
Is the Fieldmann FZP 2105-E suitable for pruning trees?
Yes, with proper technique and caution. Use the saw for branches up to the bar length. Always maintain a stable footing and avoid cutting above shoulder height.
User questions about FZP 2105-E Fieldmann
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual FZP 2105-E - Fieldmann and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FZP 2105-E by Fieldmann.
USER MANUAL FZP 2105-E Fieldmann
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Fieldmann
Model : FZP 2105-E
Category : Saw