FZP 5816-B - Saw Fieldmann - Free user manual and instructions
Find the device manual for free FZP 5816-B Fieldmann in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Saw |
| Brand | Fieldmann |
| Model | FZP 5816-B |
| Power Input | 1200 W |
| Voltage | 230 V ~ 50 Hz |
| No-Load Speed | 5000 rpm |
| Blade Diameter | 160 mm |
| Cutting Depth at 90° | 55 mm |
| Cutting Depth at 45° | 40 mm |
| Weight | 4.5 kg |
| Protection Class | II |
| Cable Length | 2.0 m |
| Laser Guide | Yes |
| Dust Extraction | Yes (external vacuum adapter) |
| Safety Features | Safety switch, blade guard, spindle lock |
| Maintenance | Clean with dry cloth; keep ventilation slots clear |
| Spare Parts Availability | Authorized service centers; carbon brushes, blade, switch |
Frequently Asked Questions - FZP 5816-B Fieldmann
How do I change the saw blade?
Unplug the saw, press the spindle lock, and use the included wrench to loosen the arbor bolt. Remove the outer flange and old blade. Install the new blade with teeth pointing downward, secure with flange and bolt, and tighten while holding the spindle lock.
What is the maximum cutting depth?
At 90°, the maximum cutting depth is 55 mm. At 45°, it reduces to 40 mm. Adjust the depth using the depth adjustment lever.
Can I use the saw for metal cutting?
The saw is designed for wood and wood-like materials. For metal cutting, use a suitable metal-cutting blade and reduce speed if possible. Always wear appropriate PPE.
How do I adjust the bevel angle?
Loosen the bevel adjustment lever, tilt the base plate to the desired angle (0° to 45°), and retighten the lever securely.
What should I do if the saw does not start?
Check the power cord and plug for damage, ensure the trigger is fully pressed, and verify that the safety lock is disengaged. If the problem persists, consult an authorized service center.
How do I clean the laser guide?
Use a soft, dry cloth to wipe the laser lens. Avoid using solvents. If the laser line is faint, replace the batteries (if applicable) or check the laser module.
What type of blade does the FZP 5816-B use?
It uses a 160 mm diameter blade with a 20 mm arbor hole. The recommended tooth count for general wood cutting is 24 to 40 teeth.
How often should I replace carbon brushes?
Check carbon brushes every 50 hours of use. Replace them when they are shorter than 6 mm to prevent motor damage. Always replace both brushes simultaneously.
Is the saw suitable for left-handed users?
Yes, the saw features a blade-left design, which is comfortable for right-handed users. Left-handed users can still use it effectively with proper technique.
What safety precautions should I take?
Always wear safety goggles and hearing protection. Keep hands away from the blade, use the blade guard, and secure the workpiece. Do not operate under influence of drugs or alcohol.
User questions about FZP 5816-B Fieldmann
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual FZP 5816-B - Fieldmann and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FZP 5816-B by Fieldmann.
USER MANUAL FZP 5816-B Fieldmann
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Fieldmann
Model : FZP 5816-B
Category : Saw