Pyle

PLMR3DNWT - Car radio Pyle - Free user manual and instructions

Find the device manual for free PLMR3DNWT Pyle in PDF.

📄 16 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Pyle PLMR3DNWT - page 5
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Single-DIN Marine Car Radio
Dimensions (W x H x D) 178 x 50 x 200 mm (7.0 x 2.0 x 7.9 inches)
Weight 1.5 kg (3.3 lbs)
Power Supply 12V DC (negative ground)
Power Output 4 x 50 Watts max
Tuner Bands AM/FM with 30 presets
Bluetooth Built-in for hands-free calling and audio streaming
USB Input Front USB port for MP3/WMA playback
AUX Input 3.5mm front auxiliary input
Remote Control Included wireless remote
Display Multicolor LCD with adjustable illumination
Water Resistance IPX6-rated (splash proof)
Maintenance Wipe with a dry, soft cloth; avoid harsh cleaners
Safety Fuse protected (10A blade fuse)
Mounting Standard 1-DIN chassis, bracket included
Compatibility Works with most 12V vehicles and marine applications
Warranty 1 year limited manufacturer warranty

Frequently Asked Questions - PLMR3DNWT Pyle

How do I pair my phone via Bluetooth?
Turn on the radio and enable Bluetooth on your phone. Select the device named Pyle PLMR3DNWT from the list. If prompted, enter PIN 0000.
Why is there no sound from the speakers?
Check if the unit is muted or volume is low. Verify speaker wires are properly connected. Ensure the fuse is intact. If using an external amplifier, check its power and connections.
How do I reset the unit?
Press the Reset button (small hole) on the front panel using a paperclip. Alternatively, disconnect the battery for 10 seconds.
The unit does not turn on. What should I do?
Check the 12V power and ground connections. Ensure the fuse is not blown. Test with a multimeter at the power wire. If power is present, the unit may be defective.
Can I charge my phone via USB?
Yes, the USB port provides 1A charging for compatible devices. However, charging speed may be slower than a dedicated charger.
How do I set the clock?
Press and hold the DISP button until the time flashes. Use the TUNE knob or arrow buttons to adjust hours and minutes. Press DISP again to save.
Why does the radio not pick up stations?
Ensure the antenna is properly connected and extended. Try tuning manually. If in a weak signal area, use local (LOC) mode.
Is this radio waterproof?
It has an IPX6 rating, meaning it can withstand splashes and rain. Do not submerge in water.
Can I use this radio in a boat?
Yes, it is designed for marine use and comes with corrosion-resistant components. Ensure proper installation away from direct water spray.
How do I save a radio station preset?
Tune to the desired station, then press and hold one of the preset buttons (1-6) until the display confirms the save.

User questions about PLMR3DNWT Pyle

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Car radio in PDF format for free! Find your manual PLMR3DNWT - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PLMR3DNWT by Pyle.

USER MANUAL PLMR3DNWT Pyle

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Pyle

Model : PLMR3DNWT

Category : Car radio