PLMRDK17 - Car radio Pyle - Free user manual and instructions
Find the device manual for free PLMRDK17 Pyle in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Radio / Stereo Receiver |
| Brand | Pyle |
| Model | PLMRDK17 |
| Category | Car Audio |
| Dimensions (W x H x D) | 7.1 x 2.0 x 5.9 inches (Standard DIN) |
| Weight | 1.5 lbs (approx.) |
| Power Supply | 12V DC (negative ground) |
| Maximum Power Output | 4 x 50 Watts (peak) |
| Radio Bands | AM / FM / Weatherband (optional) |
| Bluetooth | Yes, for hands-free calling and audio streaming |
| USB Port | Front USB for MP3/WMA playback and device charging |
| AUX Input | 3.5mm front auxiliary input |
| Display Type | LCD with backlit illumination |
| Remote Control | Included wireless remote |
| Mounting Size | Single DIN |
| Color | Black faceplate with silver accents |
| Material | Plastic chassis with metal bracket |
| Operating Temperature | -20°C to 60°C |
| Safety Feature | Built-in fuse (generally 10A) |
| Maintenance | Clean with dry cloth; avoid moisture; check wiring periodically |
| Included Accessories | Wiring harness, mounting screws, trim ring, remote control |
Frequently Asked Questions - PLMRDK17 Pyle
How do I install the Pyle PLMRDK17 car radio?
Installation requires a standard single DIN slot. Connect the wiring harness to your vehicle's power (yellow constant 12V, red switched 12V, black ground), speakers, and antenna. Use the included mounting screws and trim ring. Ensure proper grounding to avoid electrical noise.
Does the PLMRDK17 support Bluetooth?
Yes, it supports Bluetooth for hands-free calling and wireless audio streaming. Pair your phone by enabling Bluetooth on the device and selecting 'Pyle' from your phone's Bluetooth menu.
What audio formats are supported via USB?
The USB port supports MP3 and WMA audio files. Ensure your USB drive is formatted as FAT32 for best compatibility.
How do I reset the radio to factory settings?
Locate the reset button (usually a small pinhole on the front panel). Use a paperclip or similar tool to press and hold the button for 5 seconds. This restores default settings.
Why is there no sound from the speakers?
Check the following: speaker wires are properly connected, the unit is not muted, volume is turned up, and the correct source is selected. Also verify that the radio's built-in fuse is intact.
Can I use an external amplifier with this radio?
Yes, the PLMRDK17 has preamp outputs (RCA) that can be connected to an external amplifier. Check the manual for the exact output voltage and wiring details.
How do I set the clock?
Press and hold the 'DISP' or 'MENU' button until the clock display starts blinking. Use the volume knob or +/- buttons to adjust hours and minutes. Press 'DISP' again to save.
What is the maximum power output per channel?
The maximum power output is 50 watts per channel (peak). RMS power is typically around 20 watts per channel at 4 ohms.
Does the radio have a detachable faceplate for security?
Yes, the front faceplate is detachable. To remove, press the release button and lift off. Store it in the provided case when not in use to deter theft.
How can I improve FM radio reception?
Ensure the antenna is fully extended and properly connected. If reception is still poor, consider using an amplified antenna or repositioning the vehicle. The radio includes a built-in tuner with good sensitivity.
User questions about PLMRDK17 Pyle
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Car radio in PDF format for free! Find your manual PLMRDK17 - Pyle and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PLMRDK17 by Pyle.
USER MANUAL PLMRDK17 Pyle
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Pyle
Model : PLMRDK17
Category : Car radio