Oecolux

GT-AL60-LED4UK - Battery charger Oecolux - Free user manual and instructions

Find the device manual for free GT-AL60-LED4UK Oecolux in PDF.

📄 12 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Oecolux GT-AL60-LED4UK - page 3
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Battery Charger
Model GT-AL60-LED4UK
Brand Oecolux
Compatible Battery Types Ni-MH, Ni-Cd rechargeable batteries
Battery Sizes AA, AAA
Number of Charging Slots 4
Input Voltage 100-240V AC, 50/60Hz
Output Voltage 1.2V per slot
Charging Current 500mA per slot (approx.)
Charging Indicators LED per slot (red charging, green full)
Protection Features Overcharge protection, reverse polarity protection, short circuit protection
Smart Charging Individual slot monitoring with -ΔV cut-off
Dimensions 125 x 70 x 35 mm (approx.)
Weight 150 g (approx.)
Power Cord Integrated, UK plug
Material ABS plastic
Certifications CE, RoHS
Operating Temperature 0°C to 40°C
Storage Temperature -20°C to 60°C
Maintenance Clean with dry cloth; do not use liquids
Safety Instructions Read manual before use; do not charge non-rechargeable batteries

Frequently Asked Questions - GT-AL60-LED4UK Oecolux

What types of batteries can I charge with the GT-AL60-LED4UK?
You can charge Ni-MH and Ni-Cd rechargeable batteries in sizes AA and AAA.
How many batteries can I charge at once?
The charger has 4 independent slots, so you can charge up to 4 batteries simultaneously.
What do the LED indicators mean?
Each slot has an LED. Red indicates charging, green indicates full charge.
Can I charge different size batteries together?
Yes, you can mix AA and AAA batteries in the same charger. Each slot operates independently.
Does the charger have overcharge protection?
Yes, it features overcharge protection using -ΔV detection to stop charging when batteries are full.
What is the charging current?
The charging current is approximately 500mA per slot, suitable for standard Ni-MH batteries.
Can I leave batteries in the charger after charging?
It is recommended to remove batteries once fully charged to avoid unnecessary trickle charge, though the charger has protection.
Is the charger compatible with lithium-ion batteries?
No, this charger is designed only for Ni-MH and Ni-Cd batteries. Do not attempt to charge Li-ion batteries.
What should I do if an LED does not light up?
Check that batteries are inserted correctly with proper polarity. If the LED still does not light, the battery may be defective.
How do I clean the charger?
Unplug the charger and wipe with a dry cloth. Do not use water or cleaning agents.

User questions about GT-AL60-LED4UK Oecolux

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Battery charger in PDF format for free! Find your manual GT-AL60-LED4UK - Oecolux and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GT-AL60-LED4UK by Oecolux.

USER MANUAL GT-AL60-LED4UK Oecolux

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Oecolux

Model : GT-AL60-LED4UK

Category : Battery charger