PDA-100D - Angle Grinder HiKOKI - Free user manual and instructions
Find the device manual for free PDA-100D HiKOKI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Angle Grinder |
| Brand | HiKOKI |
| Model | PDA-100D |
| Disc Diameter | 100 mm (4 in) |
| No-Load Speed | 11,000 min⁻¹ |
| Rated Power Input | 705 W |
| Voltage | 220–240 V AC, 50/60 Hz |
| Weight | 1.5 kg (3.3 lbs) |
| Dimensions (L x W x H) | 263 x 112 x 103 mm |
| Arbor Size | M10 x 1.5 |
| Spindle Lock | Yes |
| Soft Start | No |
| Overload Protection | Motor overload protector |
| Vibration Control | Side handle with anti-vibration grip |
| Dust Extraction | Dust extraction guard compatible |
| Switch Type | Slide switch |
| Body Grip | Rubberized handle |
| Protection Guard | Adjustable safety guard |
| Maintenance | Regular cleaning of air vents, carbon brush inspection |
| Safety Features | Lock-off switch, wheel guard, restart protection |
| Accessories Included | Grinding disc, side handle, wrench, wheel guard |
| Reparability | Replaceable carbon brushes, spare parts available |
Frequently Asked Questions - PDA-100D HiKOKI
How do I change the disc on my HiKOKI PDA-100D?
First, unplug the grinder. Press the spindle lock and use the wrench to loosen the nut. Swap the disc and tighten the nut securely. Release spindle lock before operation.
What disc size does the PDA-100D use?
The PDA-100D accepts discs with a diameter of 100 mm (4 inches) and an arbor hole of 10 mm.
How do I adjust the wheel guard?
Loosen the guard clamp screw, rotate the guard to the desired position (typically between the operator and the wheel), then retighten the screw securely.
Is the PDA-100D suitable for cutting metal?
Yes, with a suitable cutting disc, it can cut metal, tile, or masonry. Always use the correct disc type and speed rating.
How often should I replace carbon brushes?
Inspect brushes every 50 hours of use or when you notice reduced performance. Replace if worn to less than 5 mm.
What does the overload protection do?
The motor overload protector automatically cuts power if the grinder is drawing too much current, preventing damage to the motor.
How do I clean the grinder?
Unplug the tool. Use a dry cloth to wipe the exterior. Blow compressed air through the air vents to remove dust. Do not use water or solvents.
Does the PDA-100D have a soft start feature?
No, this model does not have a soft start. It starts at full speed when the switch is activated.
What safety precautions should I take when using this grinder?
Always wear eye protection, gloves, and hearing protection. Do not use damaged discs. Keep the guard in place and use a proper grip.
Can I use a brush or wire wheel on this grinder?
Yes, as long as the accessory has a 100 mm diameter and 10 mm arbor. Ensure the maximum speed rating exceeds the grinder's no-load speed.
User questions about PDA-100D HiKOKI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Angle Grinder in PDF format for free! Find your manual PDA-100D - HiKOKI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PDA-100D by HiKOKI.
USER MANUAL PDA-100D HiKOKI
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HiKOKI
Model : PDA-100D
Category : Angle Grinder