SV 13YST - Sander METABO - Free user manual and instructions
Find the device manual for free SV 13YST METABO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Random orbit sander |
| Brand | Metabo |
| Model | SV 13YST |
| Supply voltage | 230 V ~ 50/60 Hz |
| Power consumption | 400 W |
| Sanding stroke | 5 mm |
| Plate diameter | 150 mm |
| No-load speed | 6,000 – 12,000 rpm |
| Weight | 1.8 kg |
| Dimensions (L x W x H) | 280 x 130 x 160 mm |
| Abrasive type | Hook-and-loop or screw-on discs |
| Dust extraction connection | Diameter 27 mm |
| Sound pressure level | 82 dB(A) |
| Sound power level | 93 dB(A) |
| Hand-arm vibration | 5.0 m/s² |
| Main functions | Dry sanding, stripping, polishing |
| Variable speed | Yes, electronic |
| Spindle lock | Yes |
| Additional handle | No, integrated ergonomic handle |
| Maintenance and cleaning | Clean ventilation slots, replace dust filter regularly |
| Safety | Anti-restart switch, disc brake |
| Spare parts and repairability | Plate, carbon brushes, switch, dust filter available |
| General information | User manual available in several languages |
Frequently Asked Questions - SV 13YST METABO
How to change the abrasive disc?
Disconnect the device from the mains. Use the spindle lock by pressing the button, then unscrew the central screw. Remove the old disc and place the new one. For hook-and-loop discs, simply peel off the old one and stick on the new one.
How to adjust the sander speed?
The speed is adjusted via the variable speed dial located on top of the device. Turn it to increase or decrease the speed. A higher speed is suitable for stripping, a lower speed for polishing.
Can I use the sander without dust extraction?
Yes, you can use the supplied dust container. For optimal results and less dust in the air, connect a vacuum cleaner to the dust extraction port.
What to do if the sander vibrates abnormally?
Check that the abrasive disc is properly centered and in good condition. If the problem persists, the plate may be unbalanced: replace it. The mounting screws must be firmly tightened.
How to clean the dust filter?
Gently tap the filter to remove dust. If it is heavily soiled, wash it with clean water and let it dry completely before reinstalling. Do not use solvents.
What type of abrasive disc to use?
Use discs of 150 mm diameter with hook-and-loop (Velcro) or screw-on attachment. The grit depends on the work: coarse grit (40-60) for roughing, fine grit (120-240) for finishing.
Is the sander suitable for wet sanding?
No, this sander is designed only for dry sanding. Use of water or other liquids would damage the device and void the warranty.
How to replace the carbon brushes?
Unplug the device. Open the brush covers on the sides using a screwdriver. Remove the worn brushes and insert the new ones, respecting the orientation. Close the covers. Brushes must be replaced in pairs.
Where to find the complete user manual?
The manual is available for free download on notice-facile.com. You can also order a paper version from your Metabo dealer.
The sander heats up after 10 minutes, is this normal?
Yes, moderate heating is normal. If the temperature becomes too high to touch, stop the device and check that the ventilation slots are not blocked. Allow it to cool down before resuming.
User questions about SV 13YST METABO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Sander in PDF format for free! Find your manual SV 13YST - METABO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SV 13YST by METABO.
USER MANUAL SV 13YST METABO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : METABO
Model : SV 13YST
Category : Sander