W 9-115 Quick - Sander METABO - Free user manual and instructions
Find the device manual for free W 9-115 Quick METABO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Sander / Angle Grinder |
| Brand | Metabo |
| Model | W 9-115 Quick |
| Rated Power Input | 900 W |
| Output Power | 630 W |
| Disc Diameter | 115 mm |
| No-load Speed | 11,000 rpm |
| Spindle Thread | M14 |
| Weight without cable | 2.0 kg |
| Cable Length | 2.5 m |
| Dimensions (L × H) | 280 × 100 mm |
| Quick-change System | M-Quick (tool-free) |
| Overload Protection | Yes (Metabo S-Protect) |
| Restart Protection | Yes |
| Variable Speed | No (fixed speed) |
| Power Supply | Mains (230 V, 50 Hz) |
| Maintenance and Cleaning | Clean the ventilation slots regularly; use a dry cloth |
| Spare Parts | Available via Metabo after-sales service (gear rings, brushes, etc.) |
| Repairability | Repairability score: 8.4/10 (according to Metabo) |
| Included Accessories | Guard, clamping flange, nut, pin wrench |
Frequently Asked Questions - W 9-115 Quick METABO
How to change the sanding disc on the W 9-115 Quick?
Use the M-Quick system: press the spindle lock button, turn the lock nut with the pin wrench, replace the disc, then tighten the lock nut. No additional tools are needed.
What is the rotation speed of this sander?
The no-load speed is 11,000 rpm, ideal for sanding and cutting common materials.
What types of discs can I use?
Discs of 115 mm diameter with a 22.2 mm bore. Use suitable sanding, cutting, or grinding discs. Check the maximum speed (80 m/s).
How to clean the sander after use?
Unplug the tool. Clean the housing with a dry cloth. The ventilation slots must be free of dust to prevent overheating.
Is there overload protection?
Yes, the Metabo S-Protect protects the motor in case of overload. If the tool stops, let it cool for a few minutes before restarting.
Can I use this sander cordlessly?
No, the W 9-115 Quick operates on mains power (230 V). Use a suitable extension cord if needed.
How to replace the carbon brushes?
The brushes are accessible via the side caps. Unplug the tool, unscrew the caps, remove the worn brushes and insert new ones. Tighten the caps. After replacement, run the tool at no load for 5 minutes.
What to do if the disc vibrates abnormally?
Stop immediately. Check that the disc is properly tightened and not damaged. If the problem persists, the disc may be unbalanced or worn; replace it.
Is the sander suitable for sanding wood?
Yes, with a suitable sanding disc (grit 40 to 120). Use moderate speed and steady motion to avoid burns.
Where to find the full manual?
Download the PDF manual from notice-facile.com or the Metabo website. It is available in several languages.
User questions about W 9-115 Quick METABO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Sander in PDF format for free! Find your manual W 9-115 Quick - METABO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. W 9-115 Quick by METABO.
USER MANUAL W 9-115 Quick METABO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : METABO
Model : W 9-115 Quick
Category : Sander