NV-SUBAMP500-NA - Receiver NUVO - Free user manual and instructions
Find the device manual for free NV-SUBAMP500-NA NUVO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type de produit | Subwoofer Amplifier / Receiver |
| Modèle | NV-SUBAMP500-NA |
| Marque | NUVO |
| Puissance de sortie (RMS) | 500 Watts |
| Réponse en fréquence | 20 Hz - 200 Hz |
| Entrées | RCA Ligne, Entrée haut-parleur, LFE |
| Sorties | Haut-parleur (borniers à vis) |
| Filtre passe-bas variable | Oui, 40 Hz - 200 Hz |
| Contrôle de phase | 0°/180° commutable |
| Mise en marche automatique | Oui, détection de signal |
| Dimensions (L x P x H) | 17 x 12 x 3.5 pouces |
| Poids | 15 livres (6.8 kg) |
| Alimentation | 120 V CA, 60 Hz |
| Consommation électrique | 600 W max |
| Entretien et nettoyage | Essuyer avec un chiffon sec. Ne pas utiliser de produits chimiques. |
| Sécurité | Ne pas exposer à l'humidité. Assurer une ventilation adéquate. |
| Pièces détachées et réparabilité | Contacter le service client NUVO pour les pièces. |
| Garantie | 2 ans (selon région) |
Frequently Asked Questions - NV-SUBAMP500-NA NUVO
How do I connect the subwoofer amplifier to my receiver?
Use the RCA line-level output from your receiver's subwoofer pre-out to the amplifier's LFE input. Alternatively, use speaker-level inputs if your receiver lacks a subwoofer output.
What is the recommended power setting for the amplifier?
Start with the gain control set to minimum and gradually increase until the subwoofer blends seamlessly with your speakers without distortion.
Can I use this amplifier with a passive subwoofer?
Yes, the NV-SUBAMP500-NA is designed to power passive subwoofers. Connect the subwoofer to the speaker output terminals.
How do I set the crossover frequency?
Adjust the low-pass filter knob to match the upper frequency limit of your subwoofer and the lower limit of your main speakers, typically around 80 Hz.
Why is the amplifier not turning on?
Check that the power cord is securely connected and the outlet is live. Ensure the auto-on feature is enabled and a signal is present at the input.
What does the phase switch do?
The phase switch allows you to invert the phase of the subwoofer by 180 degrees. This can help integrate the subwoofer with your main speakers and reduce cancellation.
Can I daisy-chain multiple subwoofers?
Yes, you can use the RCA output (if available) to connect additional amplifiers or subwoofers. Check the manual for output specifications.
What is the maximum impedance load recommended?
The amplifier is stable with loads down to 4 ohms. For optimal performance, use a single 8-ohm or 4-ohm subwoofer.
How do I clean the amplifier?
Unplug the unit and gently wipe the exterior with a soft, dry cloth. Avoid using liquids or abrasive cleaners.
Where can I find the user manual?
The user manual is available for free download on notice-facile.com or the NUVO support website in PDF format.
User questions about NV-SUBAMP500-NA NUVO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual NV-SUBAMP500-NA - NUVO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NV-SUBAMP500-NA by NUVO.
USER MANUAL NV-SUBAMP500-NA NUVO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NUVO
Model : NV-SUBAMP500-NA
Category : Receiver