M-8S - Power Strip Furman - Free user manual and instructions
Find the device manual for free M-8S Furman in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Power strip with surge protection |
| Brand | Furman |
| Model | M-8S |
| Number of outlets | 8 AC outlets |
| Input voltage | 230 V AC, 50/60 Hz |
| Maximum current | 10 A |
| Maximum power | 2300 W |
| Surge protection | Yes, with protection indicator light |
| RFI/EMI filtering | Yes, interference reduction |
| On/Off switch | Yes, with built-in circuit breaker |
| Dimensions (W x H x D) | 483 x 44 x 152 mm (19-inch rack format, 1U) |
| Weight | Approximately 2.5 kg |
| Housing material | Steel |
| Color | Black |
| Power cable | Detachable, length 1.8 m |
| Maintenance and cleaning | Unplug before cleaning; clean with a soft, dry cloth |
| Safety | Do not overload; do not use outdoors; unplug during thunderstorms |
| Spare parts and repairability | Replaceable fuse; interchangeable power cable |
| Warranty | 2 years (subject to conditions) |
| Typical applications | Audio, video, computer equipment |
Frequently Asked Questions - M-8S Furman
How can I tell if the surge protection is active?
The Furman M-8S is equipped with a Protection OK indicator light. If it is on, protection is working. If off, the fuse or protection has tripped; then replace the fuse or have the unit serviced.
Can I plug a UPS into this power strip?
It is not recommended to plug a UPS into a surge-protected power strip, as this may cause interference. Plug the UPS directly into a wall outlet.
How do I reset the built-in circuit breaker?
If the circuit breaker trips, unplug all devices, wait a few minutes, then press the circuit breaker button to reset it. If the problem persists, reduce the load.
What is the maximum power limit?
The total maximum power is 2300 W (10 A at 230 V). Do not exceed this limit to avoid overloading.
Is the M-8S compatible with rack mounting?
Yes, it is designed for standard 19-inch rack mounting (1U). Mounting brackets are included.
Can I use this power strip outdoors?
No, the Furman M-8S is designed for indoor use only. Exposing it to moisture or water may cause electric shock.
How do I clean the power strip?
Always unplug the unit before cleaning. Use a soft, dry cloth. Do not use chemical or abrasive cleaners.
What should I do if an outlet stops working?
First check if the circuit breaker has tripped. If all outlets are dead, the internal fuse may have blown. Contact a qualified technician to replace it.
Is the power cable detachable?
Yes, the power cable is detachable and can be replaced with a standard model (C13 to C14).
What is the lifespan of the surge protection?
The protection is designed to last the life of the unit, but may be compromised by repeated surges. Replace the power strip if the protection indicator turns off.
User questions about M-8S Furman
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Power Strip in PDF format for free! Find your manual M-8S - Furman and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. M-8S by Furman.
USER MANUAL M-8S Furman
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Furman
Model : M-8S
Category : Power Strip