RB-30C ECO - Water heaters and boilers FAGOR - Free user manual and instructions
Find the device manual for free RB-30C ECO FAGOR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Water Heater |
| Model | RB-30C ECO |
| Brand | Fagor |
| Capacity | 30 liters |
| Power Supply | 220-240 V, 50 Hz, 1500-2000 W |
| Weight (net) | 15 kg |
| Dimensions (HxWxD) | 500 x 400 x 400 mm |
| ECO Mode | Yes, for energy saving |
| Temperature Control | Thermostat adjustable 30-75°C |
| Safety Features | Overheat protection, pressure relief valve, thermal cut-out |
| Installation Type | Wall-mounted, vertical |
| Material | Steel tank with enamel coating |
| Insulation | Polyurethane foam, 40 mm |
| Maintenance | Descaling every 6 months, anode inspection yearly |
| Spare Parts Available | Heating element, thermostat, anode rod, pressure valve, gaskets |
| Energy Efficiency Class | B |
| Water Connection | G 1/2" inlet and outlet |
| Max Pressure | 8 bar |
| Included Accessories | Safety valve, mounting brackets, manual |
Frequently Asked Questions - RB-30C ECO FAGOR
How do I install the Fagor RB-30C ECO water heater?
Installation must be done by a qualified professional. Ensure the wall can support the weight (15 kg). Connect the water supply and electrical supply according to local regulations. The safety valve must be installed on the cold water inlet.
How to set the temperature on the RB-30C ECO?
The thermostat is located behind the front panel. Use a flat screwdriver to adjust the setpoint between 30°C and 75°C. For ECO mode, set it to 55°C for optimal energy savings.
What does the ECO mode do?
ECO mode reduces energy consumption by limiting the water heating temperature to 55°C and optimizing the heating cycle. This helps save electricity without compromising performance.
How often should I descale the water heater?
Descaling is recommended every 6 months, especially in hard water areas. Use a descaling solution suitable for enamel tanks and follow the instructions in the manual to avoid damage.
What are the safety features of the RB-30C ECO?
The water heater includes overheat protection, a thermal cut-out, and a pressure relief valve. These features automatically shut off the unit or release pressure to prevent accidents.
Why is water leaking from the pressure relief valve?
A small amount of water dripping from the valve during heating is normal as it relieves excess pressure. If it leaks continuously, the valve may be faulty or the water pressure is too high. Check the pressure and replace the valve if needed.
How do I replace the anode rod?
The magnesium anode rod should be inspected yearly and replaced every 2-3 years. To replace, drain the tank, unscrew the old rod, and install a new one with Teflon tape on the threads.
What does the error code E1 mean?
Error code E1 indicates a sensor failure or overheating. Turn off the power, wait 10 minutes, and restart. If the error persists, contact a technician to replace the temperature sensor.
Can I use the water heater during a power outage?
No, the RB-30C ECO requires electrical power to operate. During a power outage, hot water stored in the tank will gradually cool down. It is not designed for use without electricity.
Where can I find spare parts for the RB-30C ECO?
Spare parts such as heating elements, thermostats, and anodes are available from Fagor authorized service centers or online retailers. Use genuine parts to ensure compatibility and safety.
User questions about RB-30C ECO FAGOR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heaters and boilers in PDF format for free! Find your manual RB-30C ECO - FAGOR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RB-30C ECO by FAGOR.