KBCR2987 - Car radio Kunft - Free user manual and instructions
Find the device manual for free KBCR2987 Kunft in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Radio |
| Brand | Kunft |
| Model | KBCR2987 |
| Form Factor | Single DIN |
| Dimensions (W x H x D) | 178 x 50 x 100 mm |
| Weight | 0.45 kg |
| Power Supply | 12V DC (negative ground) |
| Max Power Output | 4 x 50 Watts |
| Radio Tuner | AM/FM with RDS |
| Playback Media | USB, SD Card, AUX, Bluetooth |
| Bluetooth Version | 5.0 (hands-free calling & audio streaming) |
| Display | LCD with backlight |
| Remote Control | Included (wired or IR) |
| Anti-Theft Protection | Detachable faceplate with security code |
| Equalizer | Preset EQ modes (Rock, Pop, Jazz, etc.) |
| Connectivity | USB port, AUX input, SD slot, Bluetooth |
| Operating Temperature | -20°C to 60°C |
| Accessories Included | Installation kit, wiring harness, user manual |
| Maintenance | Clean with soft dry cloth; avoid liquids |
Frequently Asked Questions - KBCR2987 Kunft
How do I install the Kunft KBCR2987 car radio?
First, disconnect the car battery. Remove the old radio using DIN removal tools. Connect the wiring harness matching colors (red=ignition, yellow=constant 12V, black=ground). Slide the radio into the dashboard and secure with screws. Reconnect the battery and test.
Why is my radio not turning on?
Check the car's fuse (usually 10-15A) in the fuse box. Also verify that the yellow wire receives constant 12V and the red wire gets 12V from ignition. Ensure the ground wire is properly connected to metal chassis.
How do I reset the radio to factory settings?
Press and hold the reset button (usually a small hole on the front panel) with a paper clip for about 5 seconds. Alternatively, press and hold the power button for 10 seconds until the screen turns off and reboots.
How do I pair my phone via Bluetooth?
Enable Bluetooth on your phone. On the radio, press the Bluetooth button or navigate to Bluetooth menu. Select 'Search' and choose 'KBCR2987' from your phone. Confirm pairing (PIN 0000 if prompted). Once connected, audio and calls will stream.
How do I save radio stations?
Tune to the desired station using the seek buttons. Press and hold one of the preset buttons (1-6) for 2 seconds until you hear a beep. The station is saved. Repeat for other presets.
Why is the SD card not being read?
Ensure the SD card is formatted as FAT32 (not exFAT or NTFS) and contains supported audio files (MP3, WMA, WAV). The card must be inserted with the label facing up or forward. Maximum capacity supported is 32GB.
How do I connect a USB drive?
Plug the USB drive into the front USB port. The radio will automatically switch to USB mode. Use the controls to browse files. Supported formats: FAT32, MP3, WMA, WAV. For drives larger than 32GB, ensure FAT32 formatting.
Can I use the AUX input while Bluetooth is connected?
No, the radio can only output one source at a time. To use AUX, disconnect Bluetooth or switch source to AUX via the MODE button. Unplug any USB/SD card to avoid conflicts.
The display is dim/flickering. What should I do?
Check the voltage supply (should be around 12V-14.4V). A weak battery or alternator issue can cause flickering. Adjust brightness settings in the menu. If persists, the unit may need servicing.
How do I clean the faceplate?
Remove the faceplate by pressing the release button. Use a soft, lint-free cloth slightly dampened with water (or mild soap) to gently wipe the surface. Do not use alcohol or chemicals. Ensure it's dry before reattaching.
User questions about KBCR2987 Kunft
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Car radio in PDF format for free! Find your manual KBCR2987 - Kunft and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KBCR2987 by Kunft.