TL 7420.2 - Range hood TEKA - Free user manual and instructions

Product Type	Telescopic Range Hood
Brand	Teka
Model	TL 7420.2
Dimensions (W x D x H)	600 x 500 x 150 mm
Weight	10 kg
Power Supply	220-240 V ~ 50 Hz
Max Extraction Rate	400 m³/h
Number of Speeds	3
Noise Level (max)	65 dB
Lighting	2 x 2 W LED
Filter Type	Aluminum grease filter (washable)
Recirculation Possible	Yes (requires optional carbon filter)
Control Type	Push buttons
Energy Class	A
Duct Diameter	150 mm
Included Accessories	User manual, mounting kit
Maintenance	Washable grease filter; replace carbon filter (if used) every 3-6 months
Spare Parts Availability	Grease filters, carbon filters, LED lamps available

Frequently Asked Questions - TL 7420.2 TEKA

How often should I clean the grease filter?

For optimal performance, clean the aluminum grease filter every 2-3 months. Wash it by hand with warm water and mild detergent, or in a dishwasher at low temperature.

How do I replace the carbon filter?

If using recirculation mode, replace the carbon filter every 3-6 months. Remove the grease filter, then slide out the old carbon filter and insert a new one. Ensure it is securely locked.

What is the recommended installation height above the cooktop?

For gas cooktops, install the hood at a height of 65-75 cm; for electric cooktops, 55-65 cm. Follow local regulations.

Why is my hood making excessive noise?

Check if the grease filter is clogged or if the ducting is blocked. Also ensure adequate clearance for recirculation. If noise persists, contact Teka support.

Can the hood be used without ducting?

Yes, it can be used in recirculation mode with an optional carbon filter. The air is filtered and returned to the kitchen.

How do I reset the filter saturation indicator?

After cleaning or replacing filters, press and hold the light button for 3 seconds to reset. The indicator light will turn off.

What type of light bulb does the hood use?

It uses 2 x 2W LED modules. They are built-in and not user-replaceable; contact a technician if defective.

How do I adjust the fan speed?

Press the speed buttons (1, 2, 3) to select the desired extraction power. There are three speeds.

Is the hood compatible with a 120V outlet?

No, it is designed for 220-240V AC outlets. Using a different voltage may damage the hood or cause safety hazards.

How do I contact Teka customer support?

Visit the official Teka website or refer to the user manual for contact details. Have your model number (TL 7420.2) ready.

USER MANUAL TL 7420.2 TEKA

LED

REFERENCIA

REF: 113080010 EAN: 8434778027785

CARACTERÍSTICAS

Campana telescópica

Frente inox

Frente extraíble y sustituible

Automática

Mandos mecánicos

2 lámparas LED