GT600 - Beer dispenser Perlick - Free user manual and instructions
Find the device manual for free GT600 Perlick in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Beer Dispenser |
| Brand | Perlick |
| Model | GT600 |
| Dimensions (H x W x D) | Approximately 24 x 18 x 22 inches |
| Weight | Approximately 45 lbs |
| Power Supply | 120V / 60Hz |
| Power Consumption | 200W |
| Cooling Type | Forced air circulation |
| Temperature Range | 38°F to 45°F (3°C to 7°C) |
| Keg Capacity | 1/2 barrel or 2 x 1/6 barrel |
| Draft Tower | Single faucet with drip tray |
| Materials | Stainless steel interior and exterior |
| Cleaning | Easy-clean stainless steel lines; recommended cleaning kit |
| Safety Features | Automatic shut-off when door open; child lock |
| Installation | Free-standing or undercounter; proper ventilation required |
| Accessories Included | CO2 regulator, gas hose, beer line cleaning brush |
| Warranty | 1 year parts and labor |
| Repairability | Modular design; replacement parts available |
Frequently Asked Questions - GT600 Perlick
How do I clean the beer lines on the Perlick GT600?
Use a line cleaning kit with a mild cleaning solution. Disconnect the keg, run the solution through the faucet, rinse with water, and reconnect the keg.
What temperature should I set the GT600 to?
The optimal temperature for serving beer is between 38°F and 45°F (3°C to 7°C). Adjust the thermostat accordingly.
Can the GT600 be installed under a counter?
Yes, the GT600 is designed for undercounter installation with proper ventilation. Ensure at least 2 inches of clearance around the unit.
How do I change the CO2 tank?
Turn off the regulator, remove the old tank, attach the new tank with a wrench, and slowly open the valve. Check for leaks with soapy water.
Why is my beer not dispensing properly?
Check that the keg coupler is fully engaged, the CO2 tank has pressure, and the temperature is correct. Also ensure the beer line isn't kinked.
How often should I clean the drip tray?
Clean the drip tray weekly with warm soapy water to prevent odor and bacteria buildup.
What is the maximum keg size for the GT600?
The GT600 can hold a 1/2 barrel (15.5 gallons) or two 1/6 barrel (5 gallon) kegs.
How do I prevent foaming?
Ensure the beer is at the proper temperature, the CO2 pressure is set between 10-14 psi, and the glass is clean and tilted 45 degrees when pouring.
What replacement parts are available?
Replacement parts include faucets, handles, drip trays, CO2 regulators, and cooling fans. Contact Perlick customer service.
How do I change the faucet handle?
Unscrew the old handle counterclockwise, attach the new handle, and hand-tighten. Do not use tools to avoid damage.
User questions about GT600 Perlick
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Beer dispenser in PDF format for free! Find your manual GT600 - Perlick and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GT600 by Perlick.
USER MANUAL GT600 Perlick
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Perlick
Model : GT600
Category : Beer dispenser