CMXZDCG478 - Garage door opener Craftsman - Free user manual and instructions
Find the device manual for free CMXZDCG478 Craftsman in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Craftsman |
| Model | CMXZDCG478 |
| Product Type | Garage Door Opener |
| Drive Type | Chain Drive |
| Horsepower | 1/2 HP |
| Power Supply | 120 V, 60 Hz |
| Motor Type | DC Motor |
| Lighting | Built-in 60W equivalent LED |
| Number of Remotes Included | 2 |
| Security Features | Security+ 2.0 Rolling Code, Auto Reverse, Safety Sensors |
| Compatible Door Types | Sectional doors up to 7 ft high |
| Max Door Weight | 200 lbs |
| Rail Length | 7 ft (standard) |
| Noise Level | Quiet operation |
| Dimensions (Motor Head) | 12 x 8.5 x 6 inches |
| Weight (Motor Head) | 28 lbs |
| Maintenance | Lubricate rail annually, check safety sensors monthly |
| Cleaning | Wipe with dry cloth; do not use solvents |
| Replacement Parts | Remote controls, safety sensors, rail assembly, motor unit |
| Warranty | 1 year limited |
Frequently Asked Questions - CMXZDCG478 Craftsman
How do I program a remote control for my Craftsman CMXZDCG478?
Press and release the LEARN button on the motor unit (yellow or purple button within 30 seconds). Then press and hold the remote button you wish to program until the motor unit light blinks or clicks. Release the button to confirm.
What should I do if my garage door doesn't close fully?
Check for obstructions in the door path. Adjust the close force setting by turning the adjustment screw on the motor unit clockwise to increase force. Also ensure the safety sensors are aligned and clean.
How do I reset the garage door opener to factory settings?
Press and hold the LEARN button on the motor unit for 6-10 seconds until the LED turns off. This erases all remote codes and keypad entries. Re-program remotes afterward.
Why is my garage door opener not responding to the remote?
Replace the remote battery first. If that fails, reprogram the remote. Check if the lock button on the wall control has been activated (if equipped). Also ensure the motor unit has power.
How often should I lubricate the garage door opener?
Lubricate the chain or belt drive and all moving parts annually with a lithium-based grease or specifically recommended lubricant. Avoid over-lubricating.
What does a flashing LED on the motor unit mean?
Flashing LEDs indicate error codes. For example, 1 flash: safety sensors are misaligned. 4 flashes: motor is obstructed. 10 flashes: remote signal interference. Refer to manual for full list.
How do I adjust the travel limits?
Use the UP and DOWN adjustment screws on the motor unit. Turn the UP screw to adjust open limit, DOWN screw for close limit. Small adjustments only.
Can I use the opener with a smart home system?
This model is not natively compatible with smart home hubs. However, you can add a compatible MyQ or other smart garage controller by plugging it into the wall outlet near the motor unit.
What size of garage door can this opener handle?
It is designed for standard 7-foot high sectional doors weighing up to 200 lbs. For heavier doors, consider a higher horsepower model.
How do I replace the light bulb?
Pull the light lens cover downward to expose the socket. Replace with a standard A19 LED bulb up to 60W equivalent. Do not exceed 60W to avoid overheating.
User questions about CMXZDCG478 Craftsman
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Garage door opener in PDF format for free! Find your manual CMXZDCG478 - Craftsman and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CMXZDCG478 by Craftsman.
USER MANUAL CMXZDCG478 Craftsman
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Craftsman
Model : CMXZDCG478
Category : Garage door opener