ts 4020 - Saw SCHEPPACH - Free user manual and instructions
Find the device manual for free ts 4020 SCHEPPACH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Table Saw |
| Brand | Scheppach |
| Model | TS 4020 |
| Motor Power | 2000 W |
| Blade Diameter | 250 mm |
| Arbor Size | 30 mm |
| No-Load Speed | 4800 rpm |
| Max Cutting Height at 90° | 80 mm |
| Max Cutting Height at 45° | 55 mm |
| Table Size | 640 x 480 mm |
| Rip Capacity | 495 mm |
| Dust Extraction Port | 36 mm |
| Weight | 22 kg |
| Dimensions (L x W x H) | 750 x 700 x 350 mm |
| Power Supply | 230 V / 50 Hz |
| Protection Class | IP20 |
| Safety Features | Blade guard, riving knife, push stick, emergency stop |
| Maintenance | Regularly clean dust, check blade alignment, lubricate moving parts |
| Spare Parts Availability | Blade, riving knife, fence, table insert |
Frequently Asked Questions - ts 4020 SCHEPPACH
What is the blade size for the Scheppach TS 4020?
The blade diameter is 250 mm with a 30 mm arbor hole.
How do I adjust the blade height and tilt?
Use the handwheels: one for height and one for tilt (0-45°). Lock the adjustments with the provided knobs.
What is the maximum cutting depth?
At 90°, max cut height is 80 mm. At 45°, it is 55 mm.
Does the saw have a dust extraction port?
Yes, it has a 36 mm dust extraction port. Connect a suitable vacuum for better dust management.
How do I change the saw blade?
Disconnect power, raise blade fully, use the spindle lock to secure, then loosen the arbor nut with the provided wrench. Remove blade and install new one with teeth facing forward.
What safety features are included?
The saw comes with a blade guard, riving knife, and a push stick. Always use them to prevent kickback and injuries.
How do I align the rip fence?
Loosen the fence lock, slide fence parallel to the blade, and measure the distance from blade to fence at front and back. Adjust until equal, then tighten.
What is the table size?
The table measures 640 x 480 mm. It can be extended with optional side tables.
Can I use a dado blade?
Check the manual for max dado width. Typically, a dado stack up to 30 mm may be compatible, but ensure the arbor length and blade guard fit.
Where can I find replacement parts?
Contact authorized Scheppach dealers or check the spare parts list in the manual. Common parts include blades, riving knifes, and fence components.
User questions about ts 4020 SCHEPPACH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual ts 4020 - SCHEPPACH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ts 4020 by SCHEPPACH.
USER MANUAL ts 4020 SCHEPPACH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SCHEPPACH
Model : ts 4020
Category : Saw