TS 2000 - Saw SCHEPPACH - Free user manual and instructions
Find the device manual for free TS 2000 SCHEPPACH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Table Saw |
| Brand | Scheppach |
| Model | TS 2000 |
| Motor Power | 2000 W |
| Blade Diameter | 254 mm (10") |
| Cutting Depth at 90° | 80 mm |
| Cutting Depth at 45° | 55 mm |
| Table Size | 640 x 480 mm |
| No-Load Speed | 4500 rpm |
| Voltage / Frequency | 230 V / 50 Hz |
| Weight | 25 kg |
| Dust Extraction Port | 35 mm |
| Blade Tilt Range | 0° - 45° |
| Rip Capacity (right) | 500 mm |
| Maximum Rebate Depth | 15 mm |
| Blade Arbor | 5/8" (15.875 mm) |
| Included Accessories | Parallel guide, Mitre gauge, Push stick, Blade guard |
| Protection Class | II (Double insulated) |
| Maintenance | Regular cleaning, blade sharpening, check alignment |
Frequently Asked Questions - TS 2000 SCHEPPACH
How do I change the blade on the Scheppach TS 2000?
Unplug the saw. Raise the blade guard. Use the arbor lock if available. Loosen the arbor nut with the supplied wrench. Remove the old blade and install the new one, ensuring the teeth face the correct direction. Tighten the nut and test rotation by hand before use.
What is the maximum cutting depth of the TS 2000?
At 90°, the maximum cutting depth is 80 mm. At 45°, it is 55 mm.
How do I align the blade and rip fence?
Use a combination square or alignment tool. Ensure the blade is parallel to the miter slots. Adjust the trunnion bolts if needed. For the fence, loosen the locking lever, align it parallel to the blade, and retighten.
What voltage and frequency does the TS 2000 require?
The saw operates on 230V and 50 Hz. Ensure your power outlet matches these specifications.
Can I use a dado blade on the Scheppach TS 2000?
The TS 2000 is not designed for dado blades. Using them may overload the motor and void the warranty. Stick to standard saw blades.
How do I adjust the blade tilt for bevel cuts?
Loosen the tilt lock handle, rotate the handwheel to the desired angle (0°-45°), and tighten the lock. Use a protractor to verify accuracy.
What safety features does the TS 2000 have?
It includes a blade guard, riving knife, push stick, and overload protection. Always use these for safe operation.
How often should I clean and maintain the saw?
Clean dust and debris after each use. Lubricate moving parts monthly. Inspect the blade for sharpness and replace when dull. Check belt tension periodically.
What is the weight of the Scheppach TS 2000?
The saw weighs approximately 25 kg. It is recommended to use a sturdy stand or mount it on a stable workbench.
Where can I find replacement parts for the TS 2000?
Contact Scheppach customer service or authorized dealers. Common parts like blades and belts are available online. Ensure you order using the model number and part name.
User questions about TS 2000 SCHEPPACH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Saw in PDF format for free! Find your manual TS 2000 - SCHEPPACH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TS 2000 by SCHEPPACH.
USER MANUAL TS 2000 SCHEPPACH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : SCHEPPACH
Model : TS 2000
Category : Saw