TM‑10K Gen 2 - Uncategorized RTS - Free user manual and instructions
Find the device manual for free TM‑10K Gen 2 RTS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Multimeter |
| Model | TM-10K Gen 2 |
| Brand | RTS |
| Display | 4000 or 10000 counts LCD with backlight |
| AC Voltage Range | 0.1 mV to 1000 V |
| DC Voltage Range | 0.1 mV to 1000 V |
| AC Current Range | 0.1 µA to 10 A |
| DC Current Range | 0.1 µA to 10 A |
| Resistance Range | 0.1 Ω to 40 MΩ |
| Capacitance Range | 1 pF to 100 mF |
| Frequency Range | 1 Hz to 10 MHz |
| Temperature Measurement | -20°C to 1000°C (with thermocouple) |
| Dimensions | 180 x 85 x 45 mm |
| Weight | 350 g (including battery) |
| Power Supply | 9V battery (6LR61) or 2 AA batteries (depending on version) |
| Battery Life | Approximately 200 hours (alkaline) |
| Safety Rating | CAT III 600V / CAT II 1000V |
| Accessories Included | Test leads, thermocouple (K-type), carrying case, manual |
| Functions | Auto-ranging, data hold, relative mode, max/min, diode test, continuity buzzer |
| Cleaning | Wipe with a dry, soft cloth. Do not use solvents or abrasives. |
| Repairability | Spare parts available through RTS service centers. Refer to manual for disassembly. |
Frequently Asked Questions - TM‑10K Gen 2 RTS
How do I measure DC voltage with the TM-10K Gen 2?
Set the rotary switch to the DC voltage range (V=). Insert the black lead into the COM jack and the red lead into the V/Ω jack. Touch the probes to the circuit and read the display.
What is the maximum voltage the TM-10K Gen 2 can measure?
The TM-10K Gen 2 can measure up to 1000V DC or AC RMS. Exceeding this may damage the meter and pose safety risks.
How do I replace the battery?
Turn off the meter and remove the test leads. Use a screwdriver to open the battery compartment cover on the back. Replace the 9V battery (or 2 AA depending on version) observing polarity, then close the cover.
Can I measure AC current with the TM-10K Gen 2?
Yes, set the rotary switch to the AC current range (A~). Insert the red lead into the 10A jack for high current or the mA/μA jack for low current. Break the circuit and connect the meter in series.
What does the 'Hold' button do?
The Hold button freezes the current reading on the display. Press it again to release the hold and resume normal measurement.
How do I measure temperature?
Insert the thermocouple (K-type) into the dedicated input jack or use the special adapter. Set the rotary switch to the temperature range (Temp). Touch the probe to the object and read the temperature in Celsius or Fahrenheit.
What safety precautions should I take?
Always use the correct input jacks and range. Do not measure voltages above 600V in CAT III environments. Inspect test leads for damage. Ensure the meter is in good condition before use. Follow the safety instructions in the manual.
My TM-10K Gen 2 shows 'OL'. What does that mean?
'OL' stands for Over Load. It indicates the measured value exceeds the selected range. Switch to a higher range or check if the input is within the meter's limits.
How do I clean the TM-10K Gen 2?
Use a soft, dry cloth to wipe the exterior. If needed, slightly dampen the cloth with water or mild detergent. Do not use solvents or abrasive cleaners. Keep the input jacks clean and dry.
Where can I get spare parts or repairs?
Contact RTS customer support or an authorized service center for spare parts and repairs. Refer to the manual for a list of service centers. Do not attempt to repair the meter yourself unless you are qualified.
User questions about TM‑10K Gen 2 RTS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual TM‑10K Gen 2 - RTS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TM‑10K Gen 2 by RTS.
USER MANUAL TM‑10K Gen 2 RTS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : RTS
Model : TM‑10K Gen 2
Category : Uncategorized