AXDIS-GM13 - Uncategorized Axxess - Free user manual and instructions
Find the device manual for free AXDIS-GM13 Axxess in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Axxess |
| Model | AXDIS-GM13 |
| Category | Uncategorized |
| Product Type | Radio Replacement Interface |
| Compatibility | Select GM vehicles with 13-pin radio connector |
| Dimensions (L x W x H) | 3.5 x 2.5 x 0.75 inches |
| Weight | 0.2 lbs |
| Power Input | 12V DC |
| Power Output | Amplified audio signals |
| Wire Harness Included | Yes, with pigtails and connectors |
| Programmable | Yes, via DIP switches or firmware |
| Firmware Update | Via USB connection (cable not included) |
| Steering Wheel Control Retention | Up to 16 buttons |
| Chime/Language Retention | Yes |
| OnStar Retention | Yes (with additional adapter) |
| Installation Type | Plug-and-play |
| Warranty | 1 year limited |
| Operating Temperature | -20°C to 70°C |
| Certifications | CE, RoHS |
Frequently Asked Questions - AXDIS-GM13 Axxess
What vehicles are compatible with the Axxess AXDIS-GM13?
The AXDIS-GM13 is designed for select General Motors vehicles with a 13-pin radio connector, typically from the early 2000s to 2010s. Check the Axxess website for a full list of compatible models.
How do I install the AXDIS-GM13 interface?
Installation is plug-and-play. Disconnect the battery, remove the factory radio, connect the AXDIS wiring harness between the vehicle harness and aftermarket radio, then reconnect the battery. Ensure all connections are secure.
Will the steering wheel controls still work after installation?
Yes, the AXDIS-GM13 retains up to 16 steering wheel control buttons. You may need to program them via the interface's DIP switches or through the aftermarket radio's learning function.
Does it support OnStar and factory chimes?
The AXDIS-GM13 retains factory chimes and OnStar, but for OnStar you may need an additional adapter (sold separately) if the vehicle requires it.
Can I update the firmware?
Yes, firmware updates are available via the Axxess website. You will need a USB cable (not included) to connect the interface to your computer.
What do I do if the interface doesn't power up?
Check all connections, ensure the vehicle's radio fuse is intact, and verify that the wiring harness is properly seated. If it still doesn't work, test with a known good power source.
How do I reset the AXDIS-GM13 to factory defaults?
To reset, disconnect the interface from power for at least 30 seconds, then reconnect. Alternatively, set all DIP switches to OFF and power cycle.
What is the maximum current draw?
The AXDIS-GM13 draws less than 500mA under normal operation. Ensure the aftermarket radio's power supply can handle the combined load.
Does it work with amplified factory systems?
Yes, the AXDIS-GM13 is compatible with factory amplified systems. It provides proper audio signal output for aftermarket radios.
Where can I find the user manual?
The user manual is available for free download on the Axxess website or at notice-facile.com. You can also request a translated version by email.
User questions about AXDIS-GM13 Axxess
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual AXDIS-GM13 - Axxess and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AXDIS-GM13 by Axxess.
USER MANUAL AXDIS-GM13 Axxess
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Axxess
Model : AXDIS-GM13
Category : Uncategorized