LOC-CHH2 - Uncategorized Axxess - Free user manual and instructions
Find the device manual for free LOC-CHH2 Axxess in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Line Output Converter |
| Brand | Axxess |
| Model | LOC-CHH2 |
| Dimensions (L x W x H) | 2.5 x 1.5 x 0.5 inches |
| Weight | 0.1 lbs |
| Input Voltage | 12V DC |
| Input Signal Type | Speaker-level (high-level) |
| Output Signal Type | RCA preamp (low-level) |
| Adjustable Level | Yes, via potentiometer |
| Ground Isolation | Yes |
| Frequency Response | 20 Hz - 20 kHz |
| Number of Channels | 2 (stereo) |
| Wire Gauge Input | 16-18 AWG |
| Mounting Type | Surface mount with screws |
| Operating Temperature | -20°C to 70°C |
| Maintenance | Wipe with dry cloth |
| Safety | Do not expose to moisture |
| Spare Parts & Repairability | Not user-serviceable; replace unit |
| Compatibility | Aftermarket car audio systems |
Frequently Asked Questions - LOC-CHH2 Axxess
What is the LOC-CHH2 used for?
The LOC-CHH2 is a line output converter that allows you to connect an aftermarket amplifier to a factory car stereo by converting speaker-level signals to RCA preamp outputs.
How do I install the LOC-CHH2?
Connect the input wires to the speaker outputs of your factory radio (left +/-, right +/-). Then connect the RCA outputs to your amplifier. Adjust the level control to match the amplifier's input sensitivity. Ensure proper grounding to avoid noise.
Is the LOC-CHH2 compatible with all vehicles?
It is compatible with most vehicles that have a 12V electrical system and speaker-level outputs. However, some vehicles with premium audio systems may require additional adapters.
Does the LOC-CHH2 require power?
No, it is passive and does not require an external power source. It transforms the signal from the speaker wires directly.
Can I use the LOC-CHH2 with a subwoofer?
Yes, it can be used to connect a subwoofer amplifier. Make sure to use the correct channel (left or right) or sum the channels manually if needed.
What wire gauge should I use?
Use 16-18 AWG wire for the input connections. The output RCA cables should be standard shielded RCA cables.
Why is there engine noise in my audio?
Engine noise is often caused by a ground loop. Ensure the LOC-CHH2 is properly grounded and that the amplifier and head unit share a common ground. The LOC-CHH2 has ground isolation to help, but check connections.
How do I adjust the level control?
Start with the control turned to minimum. Play music at moderate volume and slowly increase the level until you hear distortion, then back off slightly. Use a multimeter to set output voltage to match your amplifier's input sensitivity.
Can I bridge the channels for a mono subwoofer?
The LOC-CHH2 is stereo, not designed for bridging. To get mono, you can use a Y-splitter or sum the channels externally.
What is the warranty on the LOC-CHH2?
Axxess typically offers a 1-year limited warranty. Check with your retailer for specific details. Register the product online for support.
User questions about LOC-CHH2 Axxess
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual LOC-CHH2 - Axxess and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LOC-CHH2 by Axxess.
USER MANUAL LOC-CHH2 Axxess
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Axxess
Model : LOC-CHH2
Category : Uncategorized