AX-MLOC-HD1 - Uncategorized Axxess - Free user manual and instructions
Find the device manual for free AX-MLOC-HD1 Axxess in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Line Output Converter with Vehicle Integration Harness |
| Brand | Axxess |
| Model | AX-MLOC-HD1 |
| Compatibility | Select Chrysler, Dodge, Jeep, Ram vehicles (2009-2019) |
| Input Channels | 4-Channel (Front L/R, Rear L/R) |
| Output Channels | 4-Channel RCA (Front L/R, Rear L/R) |
| Max Power Handling (Input) | 40 Watts RMS per channel |
| Frequency Response | 20 Hz – 20 kHz |
| Signal-to-Noise Ratio | >90 dB |
| Total Harmonic Distortion | <0.05% |
| Output Voltage | Up to 8V RMS on all channels |
| Input Impedance | 10 kΩ |
| Output Impedance | 100 Ω |
| Wire Gauge (Power/Ground) | 16 AWG |
| Fuse Rating | 1 Amp (internal) |
| Dimensions (L x W x H) | 3.0 x 1.5 x 0.6 inches |
| Weight | 0.1 lbs |
| Color | Black |
| Material | Plastic, Copper wires |
| Installation Type | Plug-and-play with vehicle harness |
| Included Accessories | Mounting brackets, wire tap splices |
| Warranty | 1 Year |
| Certifications | CE, RoHS |
Frequently Asked Questions - AX-MLOC-HD1 Axxess
What vehicles are compatible with the Axxess AX-MLOC-HD1?
The AX-MLOC-HD1 is designed for select Chrysler, Dodge, Jeep, and Ram vehicles from 2009 to 2019. Always verify compatibility with your specific model and trim before installation.
Does the AX-MLOC-HD1 require external power or is it powered by the vehicle harness?
It is powered directly through the factory harness – no separate power connection needed. The converter draws minimal current for signal processing.
Can I connect an aftermarket amplifier to the AX-MLOC-HD1?
Yes, the output is 4-channel RCA (Front L/R, Rear L/R) with up to 8V RMS, ideal for aftermarket amplifiers. Use quality RCA cables for best performance.
How do I adjust the output voltage on the AX-MLOC-HD1?
The converter has a built-in gain control (usually via a small dial) to match the amplifier’s input sensitivity. Start at minimum and gradually increase while monitoring distortion.
Will the AX-MLOC-HD1 work with my factory radio that has active noise cancellation?
It may cause issues with ANC systems. Consult the manual or Axxess support for compatibility with your specific vehicle’s ANC.
What is the maximum power handling per channel?
Each input channel can handle up to 40 Watts RMS. Exceeding this may damage the converter. Ensure your factory output does not exceed this limit.
Is the AX-MLOC-HD1 capable of summing channels?
No, it is a straight 4-channel converter – it does not sum or mix channels. Use a separate summing adapter if needed.
How do I troubleshoot if no sound comes out after installation?
Check all connections: verify harness fits securely, check RCA cable connections, ensure amplifier(s) are turned on, and test with a known good source. Also check if the vehicle’s radio is set to an active source.
Does the AX-MLOC-HD1 include a remote turn-on output for amplifiers?
Yes, it provides a 12V remote output wire that can be connected to the amplifier’s remote terminal. It activates when the factory radio powers on.
What should I do if the harness does not fit my vehicle?
Double-check your vehicle’s year and model. If still mismatched, contact Axxess support with your VIN for correct harness identification.
User questions about AX-MLOC-HD1 Axxess
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual AX-MLOC-HD1 - Axxess and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AX-MLOC-HD1 by Axxess.
USER MANUAL AX-MLOC-HD1 Axxess
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Axxess
Model : AX-MLOC-HD1
Category : Uncategorized