E824E - Epilator BABYLISS - Free user manual and instructions

Product Type	Epilator / Multifunction Trimmer
Brand	Babyliss
Model	E824E
Power Supply	Rechargeable Ni-MH battery, 16h charge, 30 min runtime
Cutting Guides	2 adjustable guides (2-14 mm and 3-15 mm), 1 precision guide 6 positions (0.5-3 mm)
Shaving Head	18 mm face-specific
Precision Blade	7 mm for contours and designs
Nose/Ear Accessory	Included
Blade Material	Stainless steel, CMS (Chrome-Molybdenum-Stainless Steel)
Sharpening	Exclusive three-dimensional electrochemical sharpening
Waterproof	Waterproof, can be used in shower
Charge Indicator	LED indicator
Maintenance and Cleaning	Removable blades, brush after use, oil regularly
Spare Parts	Replacement blades available
Safety	Use only at the entrance of nostrils/ears; turn off before changing accessory

Frequently Asked Questions - E824E BABYLISS

How long to charge the Babyliss E824E epilator before first use?

Before first use, charge the device for 16 hours to reach full capacity of the Ni-MH batteries.

How to adjust the cutting height on the Babyliss E824E?

Push the cutting guide upwards to increase the height, downwards to decrease. The height is displayed on the back of the device. Change the guide according to the desired range.

Can I use the Babyliss E824E epilator in the shower?

Yes, the Babyliss E824E epilator is waterproof and can be used in the shower for easy maintenance and optimal hygiene.

How to clean the blades of the Babyliss E824E epilator?

Turn off the device, remove the cutting guide, detach the blades by pressing at their tip, then brush them with the provided cleaning brush. Oil regularly with Babyliss oil.

What accessories are included with the Babyliss E824E?

The device comes with: 2 cutting guides (2-14 mm and 3-15 mm), 1 precision guide 6 positions, an 18 mm shaving head, a 7 mm precision blade, a nose/ear accessory, a cleaning brush, and a charging base.

How to use the nose/ear accessory on the Babyliss E824E?

Gently insert the cutting head into the nostril or the outer ear. Use only at the entrance to avoid risk of injury.

What is the battery life of the Babyliss E824E epilator after a full charge?

After a full 16-hour charge, the battery life is approximately 30 minutes of use.

How to perform a comb cut with the Babyliss E824E?

Work without a cutting guide. Take a strand of hair between fingers or with a comb, move the comb to the desired length, then cut following. Remove cut hair regularly.

Can I change the blades of the Babyliss E824E epilator?

Yes, the blades are removable and replacement blades are available. Replace them when worn or damaged.

What to do if the charging indicator light does not turn on?

Check that the device is properly placed in the charging base, that the base is plugged in, and that the safety flap is closed. If the problem persists, contact customer service.

USER MANUAL E824E BABYLISS

-Exclusive three-dimensional etching process: for an exceptionally sharp cutting edge.
CMS (Chrome-Molybdenum-Stainless Steel): ultrahardwearing and 100% stainless steel blade.

Fixed Blade: Stainless steel

2.2 cutting guides (2-14mm and 3-15mm) for hair and beard
3.6-position precision guide (from 0,5 to 3mm for very short cuts
4. 18mm shaving head for face
5.7mm precision blade, to create precisely contours and original designs
6. Nose/ear accessory, to eliminate unwanted nose and ear hair
7. On/Off switch
8. Charging indicator light
9. Cleaning brush
10. Charging and storage base

IMPORTANT INFORMATION REGARDING THE NI-MH BATTERIES OF THIS UNIT

To obtain and maintain the longest battery autonomy possible, allow it to charge for 16 hours before using it for the first time and then approximately every three months. Full autonomy of the unit will only be obtained after three complete recharge cycles.

CHARGING THE UNIT

Before using the trimmer for the first time, allow it to charge for 16 hours.

1. Remove the trimmer and all the accessories from the base and turn the base over. Open the security tongue, insert the power cord into the opening intended for this, pushing it in firmly and replace the security tongue. Place the cord in the groove. Put the base back in place and connect it to the mains. (Fig. 1)
2. Place the trimmer (set to OFF) in the charging base and check that the charging indicator light is on.
3. A full charge will allow you 30 minutes of autonomous use.

WATERPROOF

For a greater comfort of use, your E830XE trimmer is waterproof and can even be used in the shower. Easy to clean, it guarantees a maximum hygiene.

ATTACHING AND REMOVING ACCESSORIES

Make sure that the unit is switched off before changing the trimmer head or accessories.

To attach a head, fit the base of the accessory onto the unit pressing it until you hear a click.

To remove a head, hold the handle of the unit in one hand and push up on the head with your free hand to remove it (Fig.2).

USING THE CUTTING GUIDES

Very practical, the cutting guide guarantees equal cutting length.
IMPORTANT: Always attach the cutting guide BEFORE turning

the trimmer on, and turn it off before changing the guide.

The cutting length of your E830XE trimmer is manually adjustable.

To increase the cutting length, push the cutting guide up.

To reduce the cutting length, push it down.

The selected length is displayed at the back of the trimmer.

CUTTING TECHNIQUES AND ADVICE FROM THE EXPERTS

HAIR

• Use the trimmer on clean, dry hair.

To familiarise yourself with the trimmer, start with a longer cutting length and gradually work through the shorter lengths to the one you want. In this way you'll quickly find the cutting length that suits you best.

Always move the trimmer against the direction of hair growth.

• Begin at the nape. Place the guide on the scalp and move the trimmer toward the crown of your head. Move your trimmer slowly, pointing the teeth of the guide slightly upward. Keep the trimmer in contact with your head at all times. (Fig. 3)

For the crown of the head, move from front to back, that is, from your forehead to the crown of your head.

• For the finishing touches, that is, around the nape and sideburns, use the trimmer without a cutting guide. Turn your trimmer over and move it from top to bottom. (Fig. 4)

• If you want a length greater than 30mm or if you are experienced, you can create 'comb' or 'finger' cuts:

• Work without a cutting guide.
• Take up a small section of hair with a comb or in your fingers.
• Move the comb or your fingers along the section of hair to the desired length.
• Cut your hair along the comb or your fingers.
• Remove the cut hair using a comb and check the evenness of the cut regularly. (Fig. 5)

FACE

For the beard or moustache just the way you want it...

Decide on the type of beard or moustache that best suits your face taking into account the size of your face and natural growth and thickness of your beard and/or moustache. After deciding on the form of the beard and/or moustache, it is easy to maintain its appearance by using the trimmer as soon as you feel it is necessary. For better results, we recommend cutting the beard when it is dry. This helps make the cut precise and comfortable.

To determine the shape of the beard

After having combed your beard in the direction of its natural growth, decide on the desired shape by starting under the jaw. Come back up each side towards the ears. Then continue on your cheeks towards the hair. Make sure you always trim or style your beard against the hair growth.

For an irresistibly soft skin...

The shaving headadapts perfectly to the contours of your face and gives even the most difficult parts a close shave. Result: a neat and precise cut in less time for an impeccable look.

Patterning your hair and giving it a perfect finish

Use the precision trimmer. Your precision trimmer comes with an exclusive special short cut blade. Its narrow size (7mm) enables you to pattern your hair and beard with great accuracy.

To eliminate undesirable nose and ear hairs

Gently insert trimmer head into the ear or nose and cut the hairs. NOTE! Only use in the opening of the nostrils or ears to avoid any risk of injury.

MAINTENANCE

Remove the cutting guide after each use.

Cleaning the trimmer blades regularly will maintain their optimal performance.

Removable blades

To make cleaning easier, the BaByliss trimmer blades can be removed. Make sure the trimmer is turned off. Hold the trimmer with the blades pointing up and remove them by pressing the top of the blade. (Fig. 6)

Brush the blades using the cleaning brush to remove any hair.

Periodically, it may be necessary to oil the blades. After cleaning, attach a trimmer head, switch on and oil the blades using a few drops of lubricating oil.

BaBylliss oil is specially formulated for trimmers, it will not evaporate or slow the blades down.

You can get new blades when these are worn or damaged.

DEUTSCH

Festes Messer: Rostfrei Edels-tahl

For at fastlagge skaggets form

After at have kammet skægget i dets naturlige vokseretning skuldu fastlaegge skæglinjens form ved at begynde under kaeben. Gá opad pa begge sider mod Ørene. Fortsaet derefter pa kinderne i harets retting. Sorg altid for at studse eller formgive skægget mod harets voksrretning.

KESIM MAKINESINN SARJ EDILMESI