XLT1200 - Uncategorized American Audio - Free user manual and instructions
Find the device manual for free XLT1200 American Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Professional Lighting Fixture |
| Power Supply | 100-240V AC, 50/60Hz |
| Power Consumption | 200W |
| Dimensions (L x W x H) | 15.7 x 13.0 x 11.8 inches (400 x 330 x 300 mm) |
| Weight | 28.7 lbs (13.0 kg) |
| Light Source | 12 x 3W RGBW LEDs |
| Beam Angle | 25 degrees |
| Control Protocol | DMX512 |
| DMX Channels | 16 |
| Operating Modes | DMX, Master/Slave, Sound Active, Auto |
| Cooling | Fan cooled |
| Housing Material | Metal |
| Maintenance | Clean with a soft dry cloth; avoid solvents |
| Safety Instructions | Do not expose to rain or moisture; use in dry locations |
| Spare Parts | Contact authorized service center for replacement parts |
| Repairability | Repair should be carried out by qualified personnel |
Frequently Asked Questions - XLT1200 American Audio
How do I connect the XLT1200 to a DMX controller?
Use a standard DMX cable to connect the XLT1200's DMX IN to the controller's DMX OUT. Set the fixture's DMX address using the control panel. Refer to the manual for address settings.
What is the maximum number of XLT1200 units I can daisy-chain?
You can daisy-chain up to 32 units on a single DMX universe, provided you use a DMX terminator at the end of the chain.
How do I reset the XLT1200 to factory settings?
Navigate to the menu, select 'Factory Reset', and confirm. This will erase all custom settings.
Can the XLT1200 operate without a DMX controller?
Yes, it has Sound Active and Auto modes. In Sound Active mode, it reacts to music via the built-in microphone. In Auto mode, it runs preset programs.
What power cable does the XLT1200 require?
It uses a standard IEC power cord. Ensure the voltage matches your local supply (100-240V AC).
How do I clean the XLT1200?
Use a soft, dry, lint-free cloth to wipe the exterior. Avoid using liquids or abrasive cleaners.
What should I do if the XLT1200 stops working?
First, check power and connections. If the display is blank, try resetting the fixture. If problems persist, contact technical support.
Can I mount the XLT1200 upside down?
Yes, it supports hanging installation using the included mounting brackets. Always secure with safety cables.
What is the expected lifespan of the LEDs?
The rated LED lifespan is approximately 50,000 hours under normal operating conditions.
Is the XLT1200 suitable for outdoor use?
No, it is designed for indoor use only. Protect from moisture, rain, and extreme temperatures.
User questions about XLT1200 American Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual XLT1200 - American Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XLT1200 by American Audio.
USER MANUAL XLT1200 American Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : American Audio
Model : XLT1200
Category : Uncategorized