ADJ RFC - Uncategorized American Audio - Free user manual and instructions
Find the device manual for free ADJ RFC American Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | DMX Controller |
| Model | ADJ RFC |
| Manufacturer | American Audio |
| DMX Channels | Up to 512 |
| Control Modes | Static, Sound Active, Auto, Master/Slave |
| Power Input | 9V DC, 500mA (center positive) |
| Dimensions (L x W x H) | 7.5 x 4.5 x 1.5 inches (190 x 114 x 38 mm) |
| Weight | 0.6 lbs (270 g) |
| Display | LED indicators for power and DMX signal |
| Connectors | 3-pin XLR DMX in/out, DC power jack |
| Functions | Blackout, fade, chase, strobe, speed control |
| Compatible Fixtures | Any DMX-512 compatible fixture |
| Housing Material | ABS plastic |
| Operating Temperature | -10°C to 40°C (14°F to 104°F) |
| Safety Features | Reverse polarity protection, overcurrent protection |
| Maintenance | Wipe with dry cloth, avoid liquids |
| Spare Parts Availability | Contact American Audio support for replacement parts |
| Repairability | Designed for professional service only; no user-serviceable parts |
| Included Accessories | Power adapter, user manual |
Frequently Asked Questions - ADJ RFC American Audio
How do I connect the ADJ RFC to my DMX fixtures?
Connect a 3-pin XLR cable from the DMX Out port of the RFC to the DMX In of your first fixture, then daisy-chain additional fixtures. Ensure terminator on last fixture.
What power supply does the ADJ RFC require?
The unit requires a 9V DC power adapter with at least 500mA current and center positive polarity. Use only the included adapter or equivalent.
How do I set the DMX address on the RFC?
The ADJ RFC is a controller, not a fixture, so it does not have a DMX address. It sends control data to fixtures which have their own addresses set via dip switches or menus.
Can I use the ADJ RFC in sound active mode?
Yes, the RFC has a Sound Active mode that responds to music via a built-in microphone. Press the Mode button until 'SOUND' appears on the display.
How do I create a chase or fade effect?
Select Auto mode, then use the Speed dial to adjust the chase speed. For fade, choose Fade mode. Refer to the manual for specific button sequences.
What does the blackout button do?
The Blackout button instantly turns off all connected fixtures while keeping the controller running. Press again to restore output.
How do I reset the ADJ RFC to factory settings?
There is no dedicated reset button. To reset, disconnect power, hold the Mode and Blackout buttons simultaneously, then reconnect power until lights flash.
Can I control multiple fixtures with different effects?
The RFC controls all fixtures together in a master/slave configuration. For independent zones, you need a more advanced controller with multiple channels.
How do I clean and maintain the ADJ RFC?
Disconnect power, then wipe the surface with a soft, dry cloth. Do not use liquid cleaners or spray directly. Keep vents free of dust.
What is the maximum number of fixtures I can connect?
Theoretically, you can connect up to 32 devices on a single DMX chain (RS-485 limitation). Use a DMX splitter for more.
User questions about ADJ RFC American Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual ADJ RFC - American Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ADJ RFC by American Audio.
USER MANUAL ADJ RFC American Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : American Audio
Model : ADJ RFC
Category : Uncategorized