DX5R - Uncategorized American Audio - Free user manual and instructions
Find the device manual for free DX5R American Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Professional DJ Mixer |
| Brand | American Audio |
| Model | DX5R |
| Dimensions (W x D x H) | 12.2 x 8.5 x 2.8 inches |
| Weight | 4.5 lbs |
| Power Supply | DC 9V, 1A center positive |
| Inputs | 2x RCA stereo line inputs, 1x microphone (1/4" jack) |
| Outputs | 1x RCA master output, 1x headphone (1/4" jack) |
| EQ Section | 3-band EQ per channel (high, mid, low) |
| Crossfader | Replaceable crossfader with curve control |
| Channel Faders | 60mm line faders |
| Monitoring | Cue with headphones split |
| Microphone Section | Dedicated mic volume and tone control |
| Operating Temperature | 41°F to 95°F (5°C to 35°C) |
| Power Consumption | 8W |
| Care and Cleaning | Wipe with dry cloth; avoid liquids and aerosols |
| Safety | Use only supplied power adapter; do not expose to moisture |
| Spare Parts and Repairability | Contact American Audio support for replacement faders, knobs, crossfader |
| General Information | Designed for mobile DJs and small venues; compatible with standard DJ software |
Frequently Asked Questions - DX5R American Audio
How do I connect my turntables to the DX5R?
Connect your turntables to the RCA inputs on the rear panel. Ensure your turntables have a phono preamp or connect through a phono preamp before the mixer if they do not.
How can I adjust the crossfader curve?
Use the crossfader curve control located near the crossfader. Rotating clockwise makes the cut sharper, counterclockwise makes it smoother.
Why is there no sound from the master output?
Check that the master volume is turned up, the channel faders are raised, and the correct input source is selected. Also verify cables and amplifier are powered.
Can I use this mixer with DJ software?
The DX5R is an analog mixer without a built-in soundcard. You can use it with DJ software by connecting your computer's audio output to one of the mixer's line inputs.
How do I replace the crossfader?
Unscrew the faceplate near the crossfader, unplug the old crossfader, and plug in a compatible replacement. Ensure the new crossfader is securely fastened.
What type of microphone can I use?
Use a dynamic microphone with a 1/4" TS plug. The mic input is designed for low-impedance mics.
How do I clean the mixer?
Power off and unplug the unit. Use a soft, dry cloth to wipe the surface. Do not use any liquids or aerosol cleaners.
The headphone output is too low, what can I do?
Turn up the headphone volume knob on the front panel. Also ensure the cue select buttons are properly engaged for the channels you want to monitor.
Is the DX5R compatible with 4-pin XLR power?
No, the DX5R uses a DC 9V 1A center-positive power adapter with a standard barrel connector. Do not use a different power supply.
What should I do if a knob is loose?
Check if the knob set screw is loose. Use a small hex key to tighten it. If the knob is damaged, contact support for a replacement.
User questions about DX5R American Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual DX5R - American Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DX5R by American Audio.
USER MANUAL DX5R American Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : American Audio
Model : DX5R
Category : Uncategorized