PRO-DJ - Uncategorized American Audio - Free user manual and instructions
Find the device manual for free PRO-DJ American Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | DJ Mixer / Controller |
| Brand | American Audio |
| Model | PRO-DJ |
| Dimensions (W x D x H) | 19 x 8 x 3.5 inches (rack mountable) |
| Weight | 6.5 lbs (approx.) |
| Power Supply | AC 100-240V, 50/60 Hz |
| Input Channels | 3 stereo line inputs, 2 microphone inputs (XLR/1/4") |
| Outputs | Master (XLR, RCA), Booth (1/4"), Record (RCA) |
| EQ Controls | 3-band EQ per channel (High, Mid, Low) |
| Crossfader | Replaceable fader, adjustable curve |
| Headphone Cue | 1/4" and 1/8" jacks, cue mix control |
| Effects | Built-in DSP effects: echo, flanger, filter |
| Sampling | Built-in sampler with 4 pads |
| Connectivity | USB for MIDI control and audio interface |
| Frequency Response | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio | >90 dB |
| Maintenance | Clean with soft dry cloth; avoid liquids |
| Safety | Do not expose to moisture; use in well-ventilated area |
| Spare Parts | Crossfader, knobs, fader caps available |
| Reparability | User-replaceable crossfader; service by qualified technician for other components |
Frequently Asked Questions - PRO-DJ American Audio
How do I connect my turntables to the PRO-DJ mixer?
Connect your turntables to the line inputs (RCA) on the rear panel. Ensure your turntables have a built-in preamp or use an external phono preamp.
Can I use the PRO-DJ as a USB audio interface?
Yes, the PRO-DJ has a USB port that allows it to act as a 4-channel audio interface for recording or streaming from your computer.
How do I adjust the crossfader curve?
Use the crossfader curve adjust knob located near the crossfader. Turn clockwise for a sharp cut, counterclockwise for a smoother transition.
My headphones have no sound. What should I check?
Check that headphones are plugged into the headphone jack, the cue mix knob is turned up, and the corresponding channel cue buttons are pressed.
How do I clean the mixer?
Use a soft dry cloth to wipe the surface. For stubborn dirt, slightly dampen the cloth with water. Avoid using chemicals or spraying liquids directly on the mixer.
What is the maximum input voltage for the power supply?
The power supply accepts 100-240V AC at 50/60 Hz. Use the included power cord for your region.
Can I replace the crossfader myself?
Yes, the crossfader is user-replaceable. Unscrew the faceplate, disconnect the ribbon cable, and install a compatible replacement fader.
How do I reset the mixer to factory settings?
Press and hold the Effect and Sampler buttons while powering on the mixer. All settings will revert to defaults.
What should I do if the mixer overheats?
Ensure the mixer is in a well-ventilated area and away from heat sources. If it still overheats, power off and let it cool before resuming use.
Where can I find the serial number?
The serial number is printed on the bottom panel of the mixer near the power input.
User questions about PRO-DJ American Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual PRO-DJ - American Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PRO-DJ by American Audio.
USER MANUAL PRO-DJ American Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : American Audio
Model : PRO-DJ
Category : Uncategorized