Color-250D - Uncategorized American Audio - Free user manual and instructions
Find the device manual for free Color-250D American Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | DMX LED Par Can |
| Light Source | 25W RGBW LED |
| Beam Angle | 25° |
| DMX Channels | 8 |
| Power Consumption | 35W |
| Voltage | AC 100-240V 50/60Hz |
| Weight | 2.5 kg |
| Dimensions (L x W x H) | 250 x 230 x 160 mm |
| Operating Temperature | -10°C to 45°C |
| Cooling | Convection |
| Control Modes | DMX512, Master/Slave, Sound Active, Auto |
| Display | 4-digit LED plus mode button |
| Housing Material | Aluminum alloy |
| IP Rating | IP20 (indoor use only) |
| Accessories Included | Power cord, mounting bracket, user manual |
| Maintenance | Clean lens with soft, dry cloth; ensure proper ventilation |
| Safety Features | Overheat protection, auto shut-off if fan fails |
| Repairability | LED module replaceable; contact authorized service |
| Warranty | 2 years limited |
Frequently Asked Questions - Color-250D American Audio
How do I set the DMX address?
Press the Mode button until the display shows 'AXXX'. Use Up/Down buttons to set the address. Press Mode to confirm.
Can I use this fixture outdoors?
No, the Color-250D has an IP20 rating and is designed for indoor use only. Exposure to moisture can damage the unit.
What is the maximum number of units I can chain?
You can chain up to 32 units using DMX daisy chain. Power linking is limited to 8 units at 120V or 16 at 230V.
How do I clean the lens?
Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution. Do not use abrasive cleaners or solvents.
Why is the fan not running?
The unit uses convection cooling and may not have a fan. If it does, check that the fan is not blocked and the temperature is within operating range.
Can I replace the LED myself?
The LED module is replaceable but should be done by a qualified technician. Contact American Audio support for assistance.
What power cable is required?
Use the supplied IEC power cable. Ensure the voltage matches your local mains (100-240V). Use a grounded outlet.
How do I enable sound activation?
Press Mode until 'Snd' appears. The unit will respond to music via the built-in microphone. Adjust sensitivity with Up/Down buttons.
What does the 'SL' mode do?
'SL' is slave mode. Set the first unit as master and others as slaves to synchronize programs. Slaves will follow the master's program.
How do I reset the fixture?
Disconnect power for 10 seconds, then reconnect. If issues persist, perform a factory reset by holding Mode and Up buttons for 5 seconds.
User questions about Color-250D American Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Color-250D - American Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Color-250D by American Audio.
USER MANUAL Color-250D American Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : American Audio
Model : Color-250D
Category : Uncategorized