DWM-314-GP - Uncategorized D-LINK - Free user manual and instructions
Find the device manual for free DWM-314-GP D-LINK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 4G LTE Router |
| Model | DWM-314-GP |
| Dimensions (W x D x H) | 120 x 80 x 30 mm |
| Weight | 250 g |
| Power Supply | DC 5V / 1A |
| Network Standards | 4G LTE Cat4, 3G, 2G |
| Wireless Standards | IEEE 802.11 b/g/n |
| Maximum Wireless Speed | 300 Mbps (2.4 GHz) |
| WAN Interfaces | 1 x Gigabit Ethernet |
| LAN Interfaces | 1 x Gigabit Ethernet |
| USB Port | 1 x USB 2.0 |
| SIM Card Slot | 1 x Micro SIM |
| Security | WPA/WPA2-PSK, WPS |
| Firewall | NAT, SPI |
| LED Indicators | Power, Internet, WLAN, Signal Strength |
| Antenna | Internal |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10% to 90% non-condensing |
| Power Consumption | Max 10W |
| Package Contents | Router, Power Adapter, Ethernet Cable, Quick Start Guide |
Frequently Asked Questions - DWM-314-GP D-LINK
How do I set up my D-Link DWM-314-GP router?
Insert a valid SIM card into the Micro SIM slot, connect the power adapter, and press the power button. Connect a device via Wi-Fi or Ethernet and open a web browser to access the setup wizard at http://192.168.0.1.
What should I do if I cannot connect to the internet?
Check that the SIM card is inserted correctly and has an active data plan. Verify the APN settings in the router's web interface. Ensure the antenna has good signal strength, and try moving the router to a different location.
How can I reset the router to factory settings?
Locate the reset button on the back of the router. Use a paperclip to press and hold the button for about 10 seconds until the power LED starts flashing. The router will reboot with factory defaults.
Can I use this router with any mobile carrier?
The DWM-314-GP is unlocked and supports 4G LTE bands commonly used by most carriers. However, check compatibility with your carrier's network bands before purchase.
How do I change the Wi-Fi password?
Log into the router's web interface at http://192.168.0.1 with admin credentials. Go to Wireless Settings and change the pre-shared key in the Security section. Apply the changes and reconnect your devices.
What does the signal strength LED indicate?
The signal strength LED shows the quality of the cellular connection: 1 LED for weak, 2 for moderate, 3 for good, and 4 for excellent signal.
How can I update the router firmware?
Download the latest firmware from D-Link's support website. Log into the router's web interface and navigate to Administration > Firmware Upgrade. Select the file and start the update; do not power off during the process.
Is it possible to use a USB device with this router?
Yes, the router has a USB 2.0 port that can be used to connect a USB storage device for file sharing over the network.
What is the default login for the router?
The default username is admin and the password is admin. It is recommended to change the password upon first setup.
How do I configure the APN settings?
Access the router's web interface, go to Network > Mobile Network, enter the APN provided by your mobile carrier, and save the settings. The router will reconnect automatically.
User questions about DWM-314-GP D-LINK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual DWM-314-GP - D-LINK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DWM-314-GP by D-LINK.
USER MANUAL DWM-314-GP D-LINK
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : D-LINK
Model : DWM-314-GP
Category : Uncategorized