DI-308 - Uncategorized D-LINK - Free user manual and instructions
Find the device manual for free DI-308 D-LINK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Broadband Router |
| Brand | D-Link |
| Model | DI-308 |
| Dimensions (W x D x H) | 10.2 x 6.8 x 1.6 inches |
| Weight | 1.5 lbs |
| Power Supply | 5V DC, 2A |
| WAN Port | 1 x 10/100 Mbps Ethernet |
| LAN Ports | 4 x 10/100 Mbps Ethernet |
| Wireless Standard | 802.11b/g (2.4 GHz) |
| Maximum Wireless Speed | 54 Mbps |
| Frequency Band | 2.4 GHz |
| Security Features | WEP, WPA, WPA2, SPI Firewall |
| VPN Support | PPTP, L2TP, IPSec Pass-through |
| DHCP Server | Yes |
| NAT Support | Yes |
| Antennas | 2 x External, Fixed |
| LED Indicators | Power, WAN, LAN 1-4, WLAN |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| Maintenance | Keep clean and dry; avoid dust |
| Safety | Use only supplied power adapter |
| Spare Parts & Repairability | Not user-serviceable; contact D-Link support |
| General Information | Designed for home and small office networks |
Frequently Asked Questions - DI-308 D-LINK
How do I reset the D-Link DI-308 to factory defaults?
Locate the reset button on the back panel. Use a paperclip to press and hold it for 10 seconds while the device is powered on. Release when the LEDs flash. The router will reboot with default settings.
What is the default IP address and login for the DI-308?
The default IP address is 192.168.0.1. The default username is admin and password is left blank (no password). You can access the web interface via a browser.
How do I change the WiFi password on my DI-308?
Log in to the router's web interface. Go to Wireless Settings and locate the SSID and security settings. Enter your new password in the Pre-Shared Key field, then save and reboot the router.
Can I use the DI-308 as a wireless bridge?
Yes, the DI-308 supports wireless bridge mode. Access the web interface, go to Wireless > Advanced, and enable Wireless Bridge. Enter the MAC address of the target router.
How do I update the firmware on the DI-308?
Download the latest firmware from the D-Link support site. Log in to the router, go to Tools > Firmware Update. Browse and select the downloaded file, then click Update. Do not power off during the update.
Why is my internet connection not working after setup?
Check that the WAN cable is properly connected to your modem. Verify that the WAN LED is on. Log in to the router and ensure the internet connection type (e.g., PPPoE, DHCP) is correctly configured.
How do I set up port forwarding on the DI-308?
Log in to the web interface, go to Advanced > Virtual Server. Enter the application name, port range, protocol (TCP or UDP), and the local IP address of the device. Save and apply.
What is the maximum number of devices that can connect?
The DI-308 supports up to 253 connected devices via LAN and wireless, but performance may degrade with many concurrent connections.
How do I enable WPA2 encryption?
Go to Wireless > Security. Select WPA2-PSK (AES) as the encryption type. Enter a strong passphrase of at least 8 characters. Save the settings and reconnect your wireless devices.
Why does the router overheat and reboot?
Ensure the router is placed in a well-ventilated area away from direct sunlight and heat sources. Check that the vent holes are not blocked. If the problem persists, contact D-Link support as the hardware may be faulty.
User questions about DI-308 D-LINK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual DI-308 - D-LINK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DI-308 by D-LINK.