AEG

NDC7792SB - Range hood AEG - Free user manual and instructions

Find the device manual for free NDC7792SB AEG in PDF.

📄 336 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice AEG NDC7792SB - page 65
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Decorative Wall Hood
Brand AEG
Model NDC7792SB
Width 90 cm
Depth 50 cm
Height 60-110 cm (adjustable)
Net Weight Approximately 18 kg
Power Supply 220-240 V, 50 Hz
Maximum Consumption 250 W
Energy Class A+
Max Airflow 620 m³/h
Max Noise Level 65 dB(A)
Number of Speeds 3 + intensive
Control Type Touch Electronic
Lighting LED (2 x 3 W)
Grease Filter Type Washable Aluminum
Charcoal Filter (optional) Yes, compatible
Exhaust Mode Recirculation or Extraction
Outlet Diameter 150 mm
Repairability Index 7.5/10
Filter Maintenance Monthly dishwasher wash
Exterior Cleaning Soft cloth and neutral detergent
Warranty 2 years
Country of Manufacture Germany

Frequently Asked Questions - NDC7792SB AEG

How to install the AEG NDC7792SB hood?
Installation must be carried out by a qualified professional. Maintain a minimum distance of 65 cm between the hood and an electric hob, and 75 cm for a gas hob. Make sure to securely fix the wall bracket.
How to clean the grease filters?
The aluminum grease filters are dishwasher safe or can be washed by hand with warm soapy water. Wash them every month to maintain the hood's efficiency.
Is a charcoal filter necessary?
The charcoal filter is necessary if you use the hood in recirculation mode. It should be replaced every 3 to 6 months depending on usage. The NDC7792SB model is compatible with AEG charcoal filters.
What should I do if the hood does not turn on?
Check the power supply and circuit breaker. Ensure the touch controls are clean and not blocked. If the problem persists, contact customer service.
How to reduce hood noise?
Use the lowest possible speed. Check that the filters are clean and the exhaust duct is not blocked. Proper installation also reduces vibrations.
Can I use the hood without external extraction?
Yes, in recirculation mode. You need to install a charcoal filter. The air is filtered then returned to the room.
What is the warranty for the AEG NDC7792SB hood?
The legal warranty is 2 years. AEG offers a possible extended warranty under conditions. Keep your purchase receipt.
How to change the LED bulb?
The LEDs are integrated and cannot be changed individually. In case of failure, contact an authorized technician for module replacement.
What to do if the touch keys malfunction?
Clean the surface with a soft cloth. Avoid abrasive products. If the problem persists, cut off the power for 5 minutes then turn it back on.
Where to buy spare parts for the AEG NDC7792SB hood?
Spare parts are available on the official AEG website or from authorized retailers. Use the exact model reference when ordering.

User questions about NDC7792SB AEG

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Range hood in PDF format for free! Find your manual NDC7792SB - AEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NDC7792SB by AEG.

USER MANUAL NDC7792SB AEG

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : AEG

Model : NDC7792SB

Category : Range hood