D20CW - Dehumidifier HISENSE - Free user manual and instructions
Find the device manual for free D20CW HISENSE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Dehumidifier |
| Brand | Hisense |
| Model | D20CW |
| Extraction capacity | 20 L/day (at 30°C, 80% RH) |
| Reservoir volume | 4 L |
| Compressor type | Rotary |
| Rated power | 250 W |
| Voltage | 220-240 V, 50 Hz |
| Dimensions (L x D x H) | 360 x 250 x 500 mm |
| Net weight | 12 kg |
| Noise level | 42 dB(A) |
| Refrigerant | R290 (propane) |
| Functions | Timer, auto shut-off, continuous drainage, night mode |
| Filter | Washable |
| Energy class | A+ |
| Recommended maintenance | Clean filter every 2 weeks |
| Safety | Frost protection, auto shut-off when tank full |
| Spare parts available | Filters, tank, continuous drainage kit |
| Repairability | Repairability index 7.5/10 |
| Warranty | 2 years |
| General information | User manual included, Hisense after-sales service |
Frequently Asked Questions - D20CW HISENSE
What is the extraction capacity of the Hisense D20CW dehumidifier?
The Hisense D20CW extracts up to 20 liters per day under standard conditions (30°C, 80% relative humidity).
How to install continuous drainage?
Use a drainage hose (12 mm diameter) and connect it to the continuous outlet at the back of the unit. Ensure the end of the hose is below the outlet to allow gravity flow.
How to clean the filter?
Remove the filter behind the front grille, wash it with warm soapy water, rinse and dry completely before replacing. Clean every 2 weeks to maintain performance.
What to do if the unit does not start?
Check that the water tank is properly in place and that the tank full indicator is not lit. Ensure the unit is plugged in and the ambient temperature is between 5°C and 35°C.
The dehumidifier makes noise, is this normal?
Yes, a noise level of 42 dB(A) is normal for a rotary compressor. The noise may vary depending on the extraction intensity. If the noise becomes abnormal, check that the unit is level.<
What is the ideal operating temperature?
The Hisense D20CW operates efficiently between 5°C and 35°C. Below 5°C, the compressor may freeze; above 35°C, performance may decrease.
How to empty the tank?
When the tank is full, the unit stops automatically. Remove the tank, empty it, then replace it correctly. The unit will restart automatically.
Can I use an extension cord?
It is not recommended to use an extension cord. If necessary, use a cable with a cross-section of at least 1.5 mm² and a maximum length of 2 meters to avoid voltage drops.
How to set the target humidity?
Press the 'Humidity' button to choose between 40% and 80% relative humidity. The unit will stop automatically when the level is reached.
Where to find spare parts?
Spare parts such as filters, the tank, and the drainage kit are available on the Hisense website or from authorized dealers. Use the reference D20CW to order.
User questions about D20CW HISENSE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dehumidifier in PDF format for free! Find your manual D20CW - HISENSE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. D20CW by HISENSE.