9558HP - Grinder MAKITA - Free user manual and instructions
Find the device manual for free 9558HP MAKITA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Angle Grinder (Grinder) |
| Brand | Makita |
| Model | 9558HP |
| Disc Diameter | 125 mm (5 inch) |
| Rated Power | 1200 W |
| Supply Voltage | 230 V ~ 50 Hz |
| No-Load Speed | 11,000 rpm |
| Dimensions (L × W × H) | 270 × 140 × 100 mm |
| Weight (without cable) | 2.1 kg |
| Cable Length | 2.5 m |
| Spindle Lock | Yes |
| Restart Protection | Yes |
| Switch | Sliding with lock |
| Main Functions | Grinding, cutting, brushing, deburring |
| Maintenance | Clean ventilation slots, replace carbon brushes regularly |
| Included Accessories | Grinding disc, flange, fixing nut, pin wrench |
| Spare Parts | Available at authorized dealers |
| Warranty | 2 years (subject to conditions) |
| Sound Level (LpA) | 91 dB(A) |
| Vibration (grinding) | 7.0 m/s² (uncertainty K=1.5 m/s²) |
Frequently Asked Questions - 9558HP MAKITA
How do I change the disc on my Makita 9558HP angle grinder?
Unplug the tool. Use the supplied pin wrench to lock the spindle. Loosen the fixing nut, replace the disc, then tighten the nut firmly. Make sure the disc is oriented correctly (printed side outward).
What type of disc to use on the Makita 9558HP?
Use discs of 125 mm diameter with a bore of 22.2 mm. For grinding, choose depressed center wheels (type 27). For cutting, type 41 or 42 discs are suitable.
Why won't my angle grinder start?
Check the power supply and fuse. Make sure the restart protection is not activated: after a power cut, set the switch to the off position then restart. If the problem persists, the carbon brushes may be worn.
How do I replace the carbon brushes on my Makita 9558HP?
Unplug the tool. Remove the caps from the brush holders (located on each side of the motor). Take out the old brushes, insert the new ones respecting the spring direction. Replace the caps. Use Makita replacement brushes (ref. CB-12).
What is the maximum speed of the grinder?
The no-load speed is 11,000 rpm. Never exceed the maximum speed indicated on the disc. Always use discs compatible with this speed.
How do I clean my grinder after use?
Unplug the tool. Clean the body with a slightly damp cloth. Blow dust out of the ventilation slots with compressed air. Do not use aggressive solvents.
Can I use the grinder without the guard?
No. The guard is mandatory for your safety. It protects against debris and in case of disc breakage. Never use the tool without this guard.
What torque for the disc fixing nut?
Tighten the nut firmly using the pin wrench, without over-tightening. Moderate tightening is sufficient to hold the disc in place. Over-tightening can damage the threads.
Where can I find the user manual for the Makita 9558HP?
You can download the manual in PDF format from notice-facile.com or from the Makita official website. The manual is available in multiple languages.
How to reduce vibrations during use?
Use the auxiliary handle (supplied) and hold the tool firmly. Choose a suitable and well-balanced disc. Take regular breaks to limit exposure to vibrations.
User questions about 9558HP MAKITA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Grinder in PDF format for free! Find your manual 9558HP - MAKITA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 9558HP by MAKITA.
USER MANUAL 9558HP MAKITA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MAKITA
Model : 9558HP
Category : Grinder