KAHRZNDRN2A - Drone Kogan - Free user manual and instructions
Find the device manual for free KAHRZNDRN2A Kogan in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Drone |
| Brand | Kogan |
| Model | KAHRZNDRN2A |
| Dimensions | 20 x 20 x 5 cm |
| Weight | 150 g |
| Battery Type | Li-Po 3.7V 600mAh |
| Flight Time | Approx. 10 minutes |
| Charging Time | Approx. 60 minutes |
| Remote Control Range | Up to 50 meters |
| Camera Resolution | 720p HD |
| Flight Modes | Altitude hold, headless mode, one-key return, 360° flips |
| Maintenance | Clean with soft dry cloth; avoid moisture and extreme temperatures |
| Safety Warnings | Not for children under 14; avoid flying near airports, people, or power lines |
| Spare Parts Availability | Propellers, battery, remote control sold separately by Kogan |
| Repairability | User-replaceable parts; manual available online for guidance |
| Warranty | Standard Kogan warranty, check product documentation |
Frequently Asked Questions - KAHRZNDRN2A Kogan
How do I turn on the Kogan KAHRZNDRN2A drone?
Press and hold the power button on the drone for 3 seconds until the lights flash. Then press the power button on the remote control. Pairing should occur automatically.
Why is my drone not connecting to the remote?
Ensure both devices are fully charged. Turn on the drone first, then the remote. If still not connected, try re-pairing: hold the remote's pairing button (usually near the power) for 2 seconds.
How can I calibrate the gyroscope?
Place the drone on a flat surface. Turn it on and wait for the lights to stop flashing. Then move both joysticks diagonally down and inward simultaneously until the lights flash rapidly. Calibration is complete when lights become solid.
What does 'headless mode' do?
Headless mode makes the drone's forward direction relative to the remote, not the drone's nose. This is helpful for beginners. Activate it by pressing the headless mode button on the remote; the drone will beep twice.
How do I perform a one-key return?
Press the one-key return button on the remote. The drone will automatically fly back to the takeoff point and land. Ensure the battery is sufficient for return.
What should I do if the drone flips over after takeoff?
Check the propeller direction and ensure they are correctly installed. Also recalibrate the gyroscope. If flipping persists, inspect for any blade damage.
How long does the battery take to charge?
The battery takes approximately 60 minutes to fully charge using the included USB charger. Do not leave it unattended while charging.
Can I replace the propellers myself?
Yes, propellers are user-replaceable. They are marked with 'A' and 'B' for correct positioning. Use a small screwdriver to remove the screws, pop off the old propeller, and install the new one with the matching label.
Why is my drone drifting to one side?
Drift can be due to improper calibration or wind. Recalibrate the gyroscope on a flat surface. If it still drifts, adjust the trim buttons on the remote (left/right or forward/backward) until it hovers stably.
How do I clean the drone?
Use a soft, dry cloth to wipe the body and camera. Do not use water or cleaning solvents. Keep the motors free of dust and debris.
User questions about KAHRZNDRN2A Kogan
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drone in PDF format for free! Find your manual KAHRZNDRN2A - Kogan and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KAHRZNDRN2A by Kogan.