PIPI-420 - Paint gun Truper - Free user manual and instructions
Find the device manual for free PIPI-420 Truper in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | High Volume Low Pressure (HVLP) Paint Gun |
| Brand | Truper |
| Model | PIPI-420 |
| Nozzle Size | 1.5 mm (standard), 1.8 mm (optional) |
| Fluid Cup Capacity | 400 ml (13.5 oz) |
| Operating Pressure | 30 - 50 PSI (2.1 - 3.4 bar) |
| Air Inlet | 1/4" NPT |
| Weight | 1.2 kg (2.6 lbs) |
| Dimensions (L x W x H) | 15 x 10 x 25 cm (6 x 4 x 10 in) |
| Material | Aluminum body, brass air cap |
| Power Source | Compressed air (not included) |
| Main Functions | Spray painting for automotive, furniture, and DIY projects |
| Adjustable Spray Pattern | Yes: round, horizontal, vertical |
| Fluid Control | Adjustable with screw knob |
| Maintenance | Clean immediately after use with solvent; lubricate moving parts |
| Safety Features | Trigger lock to prevent accidental discharge |
| Spare Parts Available | Needle, nozzle, air cap, seals, and cup |
| Repairability | Modular design; replacement parts sold separately |
Frequently Asked Questions - PIPI-420 Truper
What type of paint can I use with the Truper PIPI-420?
The PIPI-420 is compatible with most solvent-based and water-based paints, including enamels, lacquers, primers, and clear coats. Always strain paint before use.
How do I clean the paint gun after use?
Disassemble the nozzle, needle, and air cap. Rinse with appropriate solvent (e.g., thinner for oil-based, water for latex). Use a brush to remove dried paint. Reassemble and lubricate with light oil.
What is the recommended operating pressure?
The recommended air pressure is between 30 and 50 PSI (2.1 - 3.4 bar). Adjust pressure for desired atomization.
Why is my spray pattern uneven?
Uneven pattern may be due to clogged nozzle, low pressure, or incorrect fluid adjustment. Clean the nozzle, check pressure, and adjust fluid knob.
Can I use the PIPI-420 for latex paints?
Yes, but you may need to thin the latex according to manufacturer's instructions (typically 10-20% water) and use a larger nozzle (1.8 mm).
How do I adjust the spray pattern?
Rotate the air cap to change between round, horizontal, and vertical fan patterns. Use the pattern adjustment knob to widen or narrow the fan.
What safety precautions should I take?
Always wear a respirator, safety goggles, and work in a well-ventilated area. Avoid sparks and open flames. Use the trigger lock when not spraying.
How do I replace the needle and nozzle?
Unscrew the nozzle retaining ring, remove old nozzle and needle. Insert new needle, then nozzle, and tighten. Ensure alignment by turning the fluid knob fully open.
What is the cup capacity?
The fluid cup holds 400 ml (13.5 oz). It is gravity-fed with a screw-on lid.
Where can I find spare parts?
Spare parts like nozzle sets, seals, and repair kits are available from Truper dealers or online. Use the model number PIPI-420.
User questions about PIPI-420 Truper
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Paint gun in PDF format for free! Find your manual PIPI-420 - Truper and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PIPI-420 by Truper.
USER MANUAL PIPI-420 Truper
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Truper
Model : PIPI-420
Category : Paint gun