ABHTWS01F - Headphones Aluratek - Free user manual and instructions
Find the device manual for free ABHTWS01F Aluratek in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Headphones |
| Brand | Aluratek |
| Model | ABHTWS01F |
| Connectivity | Bluetooth |
| Battery Type | Lithium-Ion Rechargeable |
| Battery Life | Up to 8 hours |
| Charging Time | Approx. 2 hours |
| Driver Size | 40mm |
| Frequency Response | 20 Hz - 20 kHz |
| Impedance | 32 Ohms |
| Weight | Approx. 250g |
| Dimensions (Folded) | 7.5 x 6.5 x 2 inches |
| Noise Cancellation | Passive |
| Microphone | Built-in for calls |
| Controls | On-ear buttons (volume, playback, calls) |
| Cable Included | Detachable aux cable |
| Care Instructions | Wipe with dry cloth |
| Safety Warnings | Avoid liquids; do not disassemble |
| Spare Parts Available | Ear cushions |
| Warranty | 1 year |
Frequently Asked Questions - ABHTWS01F Aluratek
How do I pair the headphones with my phone?
Turn on the headphones by pressing the power button until the LED flashes blue. Enable Bluetooth on your phone, select 'ABHTWS01F' from the list, and confirm pairing.
How long does the battery last?
The battery lasts up to 8 hours on a full charge. Actual battery life may vary depending on volume level and usage.
How do I charge the headphones?
Connect the included USB charging cable to the headphones and a USB power source. The LED will turn red during charging and blue when fully charged. Charging time is approximately 2 hours.
Can I use the headphones while charging?
Yes, you can use the headphones while they are charging via the aux cable, but Bluetooth functionality may be disabled during charging.
What does the LED indicator mean?
Flashing blue: pairing mode. Solid blue: connected. Flashing red: low battery. Solid red: charging. Solid blue (charging): fully charged.
How do I adjust the volume?
Use the + and - buttons on the ear cup to increase or decrease the volume. Press and hold to skip tracks.
Can I use the headphones with a wired connection?
Yes, you can connect the included aux cable to the headphones and your device. This also works when the battery is depleted.
How do I clean the headphones?
Wipe the headphone surfaces with a soft, dry cloth. Do not use harsh chemicals or get moisture into the openings. For ear cushions, gently dab with a slightly damp cloth and let air dry.
The headphones are not connecting. What should I do?
Make sure the headphones are charged and turned on. Delete the device from your phone's Bluetooth list, then restart pairing. If issues persist, reset by holding the power button for 10 seconds.
Are replacement ear cushions available?
Yes, replacement ear cushions are sold separately. Contact Aluratek customer support or check their website for compatible parts.
User questions about ABHTWS01F Aluratek
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Headphones in PDF format for free! Find your manual ABHTWS01F - Aluratek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ABHTWS01F by Aluratek.
USER MANUAL ABHTWS01F Aluratek
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Aluratek
Model : ABHTWS01F
Category : Headphones