Zeus Power ZXR900/5 - Receiver Hifonics - Free user manual and instructions
Find the device manual for free Zeus Power ZXR900/5 Hifonics in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 5-Channel Car Audio Amplifier |
| Brand | Hifonics |
| Model | Zeus Power ZXR900/5 |
| RMS Power Output | 4 x 75W @ 4 ohms (front/rear) + 1 x 300W @ 4 ohms (subwoofer) |
| Peak Power Output | 4 x 150W + 1 x 600W |
| Frequency Response | 10 Hz - 30 kHz |
| Total Harmonic Distortion (THD) | <0.05% |
| Signal-to-Noise Ratio | >100 dB |
| Input Sensitivity | 200 mV - 6 V |
| Speaker Impedance | 2 - 8 ohms (stereo), 1 ohm stable (subwoofer channel) |
| Dimensions (W x H x D) | 17.3 x 12.2 x 2.5 inches |
| Weight | 9.5 lbs |
| Power Supply Voltage | 12 V DC (negative ground) |
| Fuse Rating | 80A (external) |
| Protection Circuits | Thermal, overcurrent, short circuit, DC offset |
| Crossover Type | Variable low-pass (sub) and high-pass (full range) filters |
| Remote Turn-On | 12 V trigger wire |
| Mounting Options | Vertical or horizontal mounting |
| Warranty | 1 year limited warranty |
| Included Accessories | Mounting screws, Allen key, remote subwoofer level control |
Frequently Asked Questions - Zeus Power ZXR900/5 Hifonics
What is the total RMS power of the Zeus Power ZXR900/5?
The amplifier delivers 4 x 75W RMS for front/rear channels and 1 x 300W RMS for the subwoofer channel, totaling 600W RMS.
How do I bridge the channels?
The Zeus Power ZXR900/5 is a 5-channel amplifier and does not support bridging on the full-range channels. The subwoofer channel is already a dedicated mono output.
What is the minimum impedance for the subwoofer channel?
The subwoofer channel is stable down to 1 ohm, allowing for high-power subwoofer setups.
What size fuse is required?
A 80-amp fuse is recommended for proper protection. Use an appropriate external fuse holder.
Can I use this amplifier with a factory radio?
Yes, the amplifier accepts input sensitivity from 200 mV to 6 V, making it compatible with factory radios. You may need a line output converter if your radio lacks RCA outputs.
How do I adjust the crossover settings?
Full-range channels have a variable high-pass filter (50 Hz - 500 Hz), and the subwoofer channel has a variable low-pass filter (50 Hz - 500 Hz). Adjust using a small screwdriver on the control panel.
What is the recommended speaker impedance for the full-range channels?
For best performance, use speakers with an impedance between 2 and 8 ohms on the full-range channels.
Does the amplifier have thermal protection?
Yes, it includes thermal protection that will shut down the amplifier if it overheats. Ensure adequate ventilation.
How do I connect the remote turn-on wire?
Connect the remote turn-on wire to a 12 V switched power source, typically from the radio's remote output. The amplifier will turn on/off with the radio.
What is the warranty period for this amplifier?
Hifonics offers a 1-year limited warranty against defects in materials and workmanship. Keep your proof of purchase.
User questions about Zeus Power ZXR900/5 Hifonics
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual Zeus Power ZXR900/5 - Hifonics and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Zeus Power ZXR900/5 by Hifonics.
USER MANUAL Zeus Power ZXR900/5 Hifonics
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hifonics
Model : Zeus Power ZXR900/5
Category : Receiver