Brutus Elite BE40-1500.1D - Receiver Hifonics - Free user manual and instructions
Find the device manual for free Brutus Elite BE40-1500.1D Hifonics in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Audio Monoblock Amplifier |
| Model | Brutus Elite BE40-1500.1D |
| Brand | Hifonics |
| RMS Power (1 Ohm) | 1500W x 1 |
| RMS Power (2 Ohm) | 750W x 1 |
| RMS Power (4 Ohm) | 375W x 1 |
| Frequency Response | 10Hz - 250Hz |
| Input Sensitivity | 0.2V - 6V |
| Low-Pass Filter | 40Hz - 250Hz, 12dB/octave |
| Subsonic Filter | 10Hz - 40Hz, 12dB/octave |
| Bass Boost | 0 - 18dB at 45Hz |
| Remote Bass Level Control | Included |
| Dimensions (L x W x H) | 12.6 x 2.4 x 9.1 inches |
| Weight | 5.5 lbs |
| Power Supply Voltage | 12V DC |
| Protection Circuits | Thermal, short circuit, over-voltage |
| Recommended Fuse | 150A |
| Speaker Impedance | 1 - 8 ohms (stable to 1 ohm) |
| Maintenance | Clean with dry cloth; avoid liquids |
| Safety | Disconnect battery before installation |
| Spare Parts & Repairability | Contact Hifonics authorized service center |
Frequently Asked Questions - Brutus Elite BE40-1500.1D Hifonics
What is the RMS power output of the Brutus Elite BE40-1500.1D?
The amplifier delivers 1500W RMS x 1 at 1 ohm, 750W RMS x 1 at 2 ohms, and 375W RMS x 1 at 4 ohms.
Can I run this amplifier at 1 ohm?
Yes, the amplifier is 1 ohm stable and rated for 1500W RMS at 1 ohm.
What type of filter does it have?
It features a low-pass filter (40-250 Hz), a subsonic filter (10-40 Hz), and a variable bass boost (0-18 dB at 45 Hz).
Does it come with a remote bass level control?
Yes, a wired remote bass level control is included.
What are the dimensions and weight?
Dimensions: 12.6 x 2.4 x 9.1 inches; Weight: 5.5 lbs.
What is the recommended fuse size?
A 150A fuse is recommended for installation.
How do I connect the amplifier?
Use a 4 AWG power and ground wire, and a 150A fuse. Connect speaker wires to the output terminals. Ensure proper impedance and disconnect battery before installation.
What protection features does it have?
It includes thermal, short circuit, and over-voltage protection to prevent damage.
Can I use it with a subwoofer?
Yes, it is designed specifically for subwoofers with a low-pass filter and subsonic filter.
Where can I find spare parts or get repairs?
For spare parts and repairs, contact an authorized Hifonics service center.
User questions about Brutus Elite BE40-1500.1D Hifonics
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual Brutus Elite BE40-1500.1D - Hifonics and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Brutus Elite BE40-1500.1D by Hifonics.
USER MANUAL Brutus Elite BE40-1500.1D Hifonics
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hifonics
Model : Brutus Elite BE40-1500.1D
Category : Receiver