Brutus Elite BE40-2000.1D - Receiver Hifonics - Free user manual and instructions
Find the device manual for free Brutus Elite BE40-2000.1D Hifonics in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Audio Monoblock Amplifier |
| Model | Brutus Elite BE40-2000.1D |
| Brand | Hifonics |
| Amplifier Class | Class D |
| Number of Channels | 1 |
| RMS Power (4 Ohm) | 500 W x 1 |
| RMS Power (2 Ohm) | 1000 W x 1 |
| RMS Power (1 Ohm) | 2000 W x 1 |
| Max Power | 4000 W |
| Frequency Response | 10 Hz - 250 Hz |
| Signal-to-Noise Ratio | > 100 dB |
| THD at Rated Power | < 0.1% |
| Input Sensitivity | 200 mV - 6 V |
| Low Pass Filter | 40 Hz - 250 Hz |
| Subsonic Filter | 10 Hz - 40 Hz |
| Bass Boost | 0 - 18 dB at 45 Hz |
| Phase Shift | 0° - 180° |
| Dimensions (L x W x H) | 18.1 x 8.5 x 2.6 in |
| Weight | 11.5 lbs |
| Fuse Rating | 250 A (external) |
| Power Supply Voltage | 10 - 16 V DC |
| Maintenance | Clean with dry cloth; avoid moisture |
| Safety Features | Thermal, overcurrent, and short circuit protection |
| Included Accessories | Remote bass knob, mounting screws, manual |
Frequently Asked Questions - Brutus Elite BE40-2000.1D Hifonics
What is the RMS power output at 2 ohms?
The amplifier delivers 1000 watts RMS at 2 ohms.
Can I bridge this amplifier?
No, this is a monoblock amplifier designed for single subwoofer setups. Bridging is not applicable.
What is the recommended fuse size?
Use an external 250A fuse (ANL type) for proper protection.
What subwoofer impedance should I use?
The amp is stable down to 1 ohm. You can use single 1 ohm, 2 ohm, or 4 ohm subwoofers.
Does it have a remote bass knob?
Yes, a remote bass level control is included for easy adjustment.
How do I set the gain properly?
Match the input sensitivity using a multimeter or oscilloscope. Start with the gain low and increase gradually to avoid distortion.
What is the low-pass filter range?
The low-pass filter is adjustable from 40 Hz to 250 Hz.
Can it be used in a marine environment?
No, it is not marine-rated. Keep away from moisture and saltwater.
What is the maximum input voltage?
The amplifier accepts input signals from 200 mV to 6 V.
Does it have speaker-level inputs?
Yes, it has high-level (speaker) inputs if an aftermarket head unit lacks RCA outputs.
User questions about Brutus Elite BE40-2000.1D Hifonics
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual Brutus Elite BE40-2000.1D - Hifonics and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Brutus Elite BE40-2000.1D by Hifonics.
USER MANUAL Brutus Elite BE40-2000.1D Hifonics
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hifonics
Model : Brutus Elite BE40-2000.1D
Category : Receiver