SK-5 - Compass SUUNTO - Free user manual and instructions

Product type	Diving compass with damping fluid
Brand	SUUNTO
Model	SK-5
Version	Wristband
Use	Underwater diving, land navigation
Main functions	Bearing from site, bearing on map, heading tracking, magnetic declination compensation, underwater orientation with natural landmarks
Graduation	360° counterclockwise (0° at North)
Maximum tilt for use	Approximately 10 degrees from horizontal
Lubber line	Arrow on the capsule and the instrument body
Material	High quality, resistant
Maintenance	Clean with a soft dry cloth after use. Rinse with fresh water after immersion in salt water.
Safety	Keep horizontal to avoid needle blockage. Do not use while moving. Stop before reading.
Customer service	European call center: [phone]. Website: www.suunto.com
Warranty	Not specified in the manual
Accessories	Not specified

Frequently Asked Questions - SK-5 SUUNTO

How to use the SK-5 compass for a bearing on a site?

Hold the compass horizontally, the lubber line pointing outward. Turn yourself until the lubber line points to the target. Rotate the bezel to bring the double mark in front of the North needle. The value in front of the double mark is the bearing angle. To memorize, set the bezel to that value.

How to take a bearing on a map with the SK-5?

Place the compass on the map aligning the lubber line with the direction of the target. Rotate the bezel to align the double mark with the magnetic north of the map. In the field, keep the North needle in the notch of the double mark to follow the direction.

How to follow a given heading with the SK-5?

Set the heading value in front of the center of the double mark (or the red line on SK-7). Rotate the compass so that the North needle is inside the double mark. The lubber line then indicates the direction to follow.

How to account for magnetic declination?

The local magnetic declination is usually indicated on the map. For accurate bearing, adjust the bezel to compensate for this declination before following the heading.

What is the maximum tilt tolerated by the SK-5?

The SK-5 tolerates an inclination of about 10 degrees from horizontal before the needle locks.

How to use the compass underwater to swim in a straight line?

Stop, hold the compass horizontally, wait for the needle to stabilize in the notch of the double mark. Spot a fixed object in the indicated direction and swim toward it. Repeat as soon as the object is reached.

What to do if unsure about heading underwater (low visibility)?

Slowly rotate the compass left and right and check that the North needle turns freely before trusting the heading. Use fixed references as soon as possible.

How to survey an area using the SK-5?

Swim in a main direction (North, South, East, West) counting fin strokes (e.g., 100 strokes ~ 100 m). Turn 90°, move slightly, then turn another 90° in the same direction and swim the same number of fin strokes. Repeat to cover the area.

How to maintain the SK-5 compass after a sea dive?

Rinse it with fresh water to remove salt, then dry it with a soft cloth. Avoid shocks and store it in a dry place.

Where to find spare parts or get help for the SK-5?

Contact SUUNTO European call center at [phone] or visit the website www.suunto.com. The full manual is available for free download.

USER MANUAL SK-5 SUUNTO

SUUNTO Diving Compasses

USER'S GUIDE

Canada Phone[phone]

European Call Center

Phone [phone]

Suunto Website

www.suunto.com

THE SUUNTO DIVING COMPASSES USER'S GUIDE

The high-quality, liquid-filled Suunto diving compasses are durable, reliable and easy to use. The Suunto diving compass range includes both wrist and combo models. The SK-6 and SK-7 compasses have a side reading window.

The direction line, which indicates the direction of your destination, is indicated as follows:

Compass

SK-5 wrist compass

SK-6 wrist compass

SK-6 combo compass

SK-7 wrist compass

SK-7 combo compass

Direction line

Arrow on the compass body and capsule.

Arrow on the compass body

No line, the console center line shows the direction.

Red line on the compass capsule

Red line on the compass capsule and console center line.

COMPASS USE FOR DIVERS

ABOVE WATER

- Sighting a compass bearing

Hold the compass so that the compass is in a horizontal position and the direction line points away from you. Turn with the compass until the direction line points at your destination, then turn the direction ring until the magnetic North needle is aligned between the direction slit marks. The index mark, or on the SK-7 compass the front end of the direction line, shows your compass bearing, and as long as the North needle is aligned between the slit marks, the direction line points toward your destination. If the compass has a side-reading window, you can also take a bearing by directing the compass towards the destination and by reading the compass bearing from the side window. This bearing can be memorized by turning the direction ring to that bearing.

- Obtaining a bearing from a map

Place the compass on the map, the direction line pointing from your point of departure to your destination. If necessary, use a ruler to connect the two points, and hold the compass

against the ruler. Turn the direction ring until the direction slit marks point to the magnetic North on the map. When proceeding from map to terrain, all you have to do is keep the North needle between the slit marks while going from point of departure to destination.

- Setting a given bearing or direction

The scale division is 360 degrees going counterclockwise (clockwise in SK-7) from 0 degrees at North. Turn the direction ring until the index mark, or on the SK-7 compass the front end of the direction line, is at the desired direction. Turn the compass until the needle falls between the slit marks. The direction line now points in the desired direction.

- Magnetic declination

Maps are drawn in correlation to the geographic poles, while the magnetic compass needle is subject to magnetic declination, which varies according to the location. For absolutely exact map work, local declination (which is usually given on the map) should be taken into account.

- General orientation on the diving site

Before diving, check the main compass bear

ings at the diving site, paying special attention to memorizing the direction of the shoreline and bearings of landmarks that may be of importance.

UNDER WATER

Natural aids to underwater navigation

• The underwater extension of the shore's inclination tells the diver if he is following the shoreline. Be extremely careful, however: underwater ridges may lead you astray. Surface occasionally to check.
• The dip and stratification of rocks on the shore can often be followed over large areas under water.
• Sand ripples form long lines parallel to the shore.
  The direction of currents should be noted by their effect on algae or drifting particles. (Use the compass to check the bearing of the current).
• In shallow water, the sun's direction can be seen from shadows on the bottom, or by looking toward the surface.
• Swimming in a straight line along the bottom

is greatly facilitated if you can line up three distinctive objects in your line of vision. As you reach the first one, line up a new one farther away, so that you again have three points determining your course. This way you can counteract the effect of a side current.

Using the compass under water

Usually, a compass must be held precisely in a horizontal position, otherwise the magnetic needle will stick. However, the SK-5 compass may be inclined about ± 10 degrees from the horizontal. In the SK-6 the allowed inclination is approximately ± 14 degrees and in the SK-7 approximately ± 30 degrees.
- Do not attempt to use the compass before you come to rest and can align the compass horizontally with the aid of a flat bottom, a glimpse of the surface, your own bubbles going up, or the pull of gravity. When doubtful, as in darkness or very murky water, turn the compass slowly right and left, checking that the North needle swings freely, before trusting your bearing.
- Swimming along the bottom, make use of fixed points. Keep still until the needle set

ties between the slit marks (your predetermined bearing), choose a distinctive object near the edge of vision in that direction, swim toward it, and repeat the operation on reaching it.

Commonly, the diver wants to follow a predetermined bearing under water, trying to reach a wreck, a rock etc. When submerging after obtaining the bearing on the surface, he must be careful not to accidentally disturb the direction ring, and to be on the safe side, the compass bearing should always be memorized.

• Avoid swimming long distances "in the blue". With practice you can swim straight by holding the compass constantly in front of your face, making sure that the direction line as precisely as possible points in your swimming direction. This can be facilitated by holding the compass in your hand instead of attaching it to your wrist. When possible, start by diving straight down to the bottom, then use the compass to follow fixed points, as described above.

• In clear water, the compass can be used to swim in a search pattern over a fairly large area. Count your swim kick pairs (each left

or each right kick), swimming on one of the main bearings (North, South, East, West). Count to 100 kick pairs (roughly 100 meters), turn 90 degrees, swim a few kicks, then turn 90 degrees further, and again swim 100 kick pairs. The pattern is continued for as long as necessary. The side displacement between the long legs in a search pattern depends on visibility. Make it preferably shorter than theoretically possible, as your directional error on the long legs is apt to be in the order of several degrees.

COORDONNÉES DU SERVICE CLIENTÉLE

FR

Suunto Oy Tél. [phone] Fax [phone]

Suunto

USA Tél. [phone]

Canada Tél.[phone]

This publication and its contents are proprietary to Suunto Oy.

Suunto, Wristop Computer, Diving Compasses, Replacing Luck and their logos are registered or unregistered trademarks of Suunto Oy. All rights reserved.

While we have taken great care to ensure that information contained in this documentation is both comprehensive and accurate, no warranty of accuracy is expressed or implied. Its content is subject to change at any time without notice.

www.suunto.com