AXDSPX-CH8 - Uncategorized Axxess - Free user manual and instructions
Find the device manual for free AXDSPX-CH8 Axxess in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Signal Processor (DSP) with amplifier |
| Brand | Axxess |
| Model | AXDSPX-CH8 |
| Dimensions (W x H x D) | 7.1 x 1.8 x 4.5 inches (180 x 45 x 115 mm) |
| Weight | 1.2 lbs (0.55 kg) |
| Power Supply | 12V DC (vehicle electrical system) |
| Maximum Power Output | 50W x 4 channels (RMS at 4 ohms) |
| Input Sensitivity | 0.2V – 5V |
| Frequency Response | 20 Hz – 20 kHz |
| Signal-to-Noise Ratio | >100 dB |
| Total Harmonic Distortion | <0.05% |
| Main Functions | Digital signal processing, time alignment, crossover filters, equalizer, input summing, remote control |
| Audio Inputs | 4 high-level speaker inputs, 4 RCA low-level inputs |
| Audio Outputs | 8 preamp outputs (RCA), 4 amplified speaker outputs |
| Remote Control | Wired remote control included |
| Maintenance | Clean with dry cloth; avoid liquids; ensure ventilation |
| Safety Precautions | Disconnect battery before installation; use correct gauge wire; avoid short circuits |
| Spare Parts Availability | Contact Axxess customer service for replacement parts |
| Repairability | Serviceable by qualified technician; no user-serviceable internal components |
Frequently Asked Questions - AXDSPX-CH8 Axxess
How do I connect the AXDSPX-CH8 to my car stereo?
Connect the high-level inputs to your factory speaker wires or use the RCA inputs if your head unit has preamp outputs. Follow the wiring diagram in the manual. Ensure you disconnect the battery before starting.
Can I use this DSP with a factory radio?
Yes, the AXDSPX-CH8 accepts high-level speaker inputs, making it compatible with most factory radios. It also features automatic signal detection.
How do I adjust the crossover settings?
Use the included remote control or the Axxess software (if available) to set high-pass, low-pass, and band-pass filters for each channel pair. The crossover frequencies can be adjusted from 20 Hz to 20 kHz.
What is the maximum power output per channel?
The AXDSPX-CH8 delivers up to 50W RMS per channel at 4 ohms. Power output may vary with impedance and voltage.
Can I bridge channels for more power?
No, this model does not support bridging. It is designed for 4-channel operation. For more power, consider an external amplifier.
How do I perform a factory reset?
Hold the reset button on the remote control for 5 seconds, or disconnect power for 10 minutes and reconnect. This will restore default settings.
Why is there no sound output?
Check the input connections, power supply, and remote turn-on wire. Ensure the master volume is turned up. Also verify that the input mode (high/low) matches your source.
Can I control the subwoofer level separately?
Yes, the remote control allows you to adjust the subwoofer output level independently. You can also set a dedicated subwoofer channel in the software.
Is the device waterproof?
No, the AXDSPX-CH8 is not waterproof. It should be installed in a dry location inside the vehicle, away from moisture and extreme temperatures.
Where can I download the full manual?
The full manual is available for free download in PDF format from notice-facile.com or the Axxess official website. Select your language and provide your email if needed.
User questions about AXDSPX-CH8 Axxess
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual AXDSPX-CH8 - Axxess and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AXDSPX-CH8 by Axxess.
USER MANUAL AXDSPX-CH8 Axxess
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Axxess
Model : AXDSPX-CH8
Category : Uncategorized