H2O DMX PRO - Uncategorized American Audio - Free user manual and instructions
Find the device manual for free H2O DMX PRO American Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Fog/Haze Machine |
| Brand | American Audio |
| Model | H2O DMX PRO |
| Category | Uncategorized (DMX Lighting Effects) |
| Power Supply | AC 120V 60Hz (or 230V 50Hz, depending on region) |
| Power Consumption | Approx. 500-1000W (typical for hazer) |
| DMX Channels | 3 or 4 channels (for constant haze and variable output) |
| Output | Up to 10,000 cubic feet per minute (CFM) |
| Fluid Capacity | 2.5 liters (0.66 gallons) |
| Warm-up Time | Approx. 2-3 minutes |
| Dimensions (WxDxH) | 21.5 x 14.5 x 12.7 inches (approx.) |
| Weight | 28.5 lbs (12.9 kg) |
| Control | DMX512, Analog 0-10V, or manual timer control |
| Fluid Type | Water-based haze fluid (recommended) |
| Cleaning Instructions | Periodically flush system with distilled water or special cleaning fluid |
| Safety Features | Thermal cutoff, low fluid shut-off |
| Spare Parts Available | Pump, heating element, fan, DMX board |
| Repairability | Modular components; user replaceable |
| General Information | Designed for professional stage effects; low-lying haze effect |
Frequently Asked Questions - H2O DMX PRO American Audio
What type of fluid should I use in the H2O DMX PRO?
Use only water-based haze fluid recommended for fog machines. Avoid oil-based fluids as they can damage the machine.
How do I connect the H2O DMX PRO to a DMX controller?
Use a standard 3-pin XLR cable to connect the DMX input on the machine to your controller's output. Set the DMX address using DIP switches or a digital display.
How long does it take to warm up?
The warm-up time is typically 2-3 minutes. The machine will indicate readiness via an LED or beeper.
Can I use this machine without DMX?
Yes, the H2O DMX PRO can be used in standalone mode with onboard timer controls or via an analog 0-10V signal.
How do I clean the machine?
Regularly flush the machine with distilled water or a specialized fog machine cleaning solution. Follow the manual's procedure to avoid clogging.
What is the recommended fluid capacity?
The fluid tank holds approximately 2.5 liters. Always keep the tank filled to avoid running dry.
Why is the machine not producing haze?
Check that the fluid tank is full, the machine has warmed up, and the DMX or control settings are correct. Also ensure the thermal fuse hasn't tripped.
Can I use the H2O DMX PRO outdoors?
It is designed for indoor use. Outdoor use can be risky due to wind dispersing haze quickly and potential exposure to moisture.
How do I replace the heating element?
Disconnect power, remove the side cover, disconnect wires and mounting screws, then install a new element. Consult the manual for exact steps.
What is the maximum haze output?
The machine can cover up to 10,000 cubic feet per minute with haze, but actual coverage depends on air movement and room size.
User questions about H2O DMX PRO American Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual H2O DMX PRO - American Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. H2O DMX PRO by American Audio.
USER MANUAL H2O DMX PRO American Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : American Audio
Model : H2O DMX PRO
Category : Uncategorized