Quad Gem DMX - Uncategorized American Audio - Free user manual and instructions
Find the device manual for free Quad Gem DMX American Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Par Can |
| Model | Quad Gem DMX |
| Brand | American Audio |
| Light Source | 4-in-1 RGBW LEDs |
| Number of LEDs | 4 (1 per color) or 12 (3 per color) |
| DMX Channels | 4, 6, or 8 (selectable) |
| DMX Connectors | 3-pin XLR in/out |
| Control Modes | DMX, Master/Slave, Sound-Active, Auto |
| Beam Angle | 25 degrees (typical) |
| Power Consumption | 50W |
| Power Supply | AC 100-240V, 50/60Hz |
| Dimensions (L x W x H) | 10.5 x 8.5 x 10.5 inches |
| Weight | 5.5 lbs |
| Housing Material | Aluminum and plastic |
| Cooling | Passive (no fan) |
| Mounting Options | Floor standing or truss mount with included bracket |
| Dimmer | 0-100% linear |
| Strobe | Variable speed (0-20 Hz) |
| Color Mixing | RGBW full color range |
| Maintenance | Clean with soft, dry cloth; avoid moisture |
| Safety | Use specified voltage; do not operate in damp environments |
| Included Accessories | Power cord, DMX cable (short), user manual |
| Replacement Parts | LED modules, power supply, fuse (3A) |
Frequently Asked Questions - Quad Gem DMX American Audio
How do I set the DMX address on the Quad Gem DMX?
Use the DMX address buttons on the rear panel. Press and hold the 'Menu' button until the display blinks, then use the up/down buttons to set the desired address. Press 'Enter' to confirm.
What are the different DMX channel modes?
The fixture supports 4-channel (RGBW), 6-channel (RGBW + dimmer + strobe), and 8-channel (RGBW, dimmer, strobe, color macro) modes. Refer to the manual for specific channel assignments.
Can I use this fixture without a DMX controller?
Yes, the Quad Gem DMX can operate in master/slave, sound-active, or auto mode. In sound-active mode, internal microphone responds to music. In auto mode, built-in programs cycle colors.
What is the power consumption and voltage requirement?
The fixture consumes 50W and operates on AC 100-240V, 50/60Hz. Use the included power cord and ensure proper voltage.
How do I clean the fixture?
Disconnect power and allow to cool. Use a soft, dry cloth to gently wipe the housing and lenses. Do not use water, solvents, or abrasive cleaners.
What safety precautions should I take?
Always use the specified voltage. Do not expose to rain or moisture. Ensure adequate ventilation when operating. Disconnect power before maintenance.
Can I replace the LEDs if they fail?
Yes, the LED modules are replaceable. Contact American Audio or an authorized service center for replacement parts. Do not attempt to disassemble the LED board yourself.
What is the beam angle?
The beam angle is approximately 25 degrees, suitable for stage washes and effects.
How do I mount the fixture on a truss?
Use the provided mounting bracket and a clamp (not included). Secure the bracket to the fixture and attach the clamp to the truss. Ensure the safety cable is attached.
Why is the fixture not responding to DMX?
Check the DMX cable connections and ensure the DMX address is correctly set. Verify the controller is sending data and that the fixture is in DMX mode. Try a different cable or port.
User questions about Quad Gem DMX American Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Quad Gem DMX - American Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Quad Gem DMX by American Audio.
USER MANUAL Quad Gem DMX American Audio
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : American Audio
Model : Quad Gem DMX
Category : Uncategorized