TURBINE KT 76 - Wood stove SUPRA - Free user manual and instructions

Product type	Wood stove
Brand	Supra
Model	TURBINE KT 76
Height	76 cm
Width	50 cm
Depth	40 cm
Weight	80 kg
Material	Steel
Nominal power	7 kW
Energy efficiency	75 %
Fuel	Wood logs (max 50 cm)
Feeding	Manual
Main functions	Heating by radiation and convection
Glass	Self-cleaning ceramic glass
Air inlet	Adjustable primary and secondary
Routine maintenance	Regular cleaning of the glass and ash pan
Chimney sweeping	Mandatory twice a year
Safety distance	50 cm from combustible materials
Standards	CE, Flamme Verte 7 stars
Spare parts available	Glass, seals, grate, ash pan
Repairability	Repairability index 8/10

Frequently Asked Questions - TURBINE KT 76 SUPRA

What is the diameter of the flue pipe?

The diameter of the flue pipe is 150 mm (6 inches). It is recommended to use a pipe suitable for wood stoves.

How to light the stove efficiently?

Use the top-down lighting method: place small logs in a crisscross pattern, kindling, and a firelighter. Open the air inlet fully for 10 to 15 minutes.

What is the efficiency of this stove?

The efficiency is about 75%, which corresponds to a Flamme Verte 7-star label.

How to maintain the glass?

Clean the glass regularly with a damp cloth and white vinegar or a specific stove glass cleaner. Avoid abrasives.

What is the frequency of chimney sweeping?

Chimney sweeping must be carried out at least twice a year, preferably before and after the heating season, by a qualified professional.

Can you burn wet wood?

No, only use dry wood with a moisture content below 20%. Wet wood clogs the stove and reduces efficiency.

What are the safety distances?

Maintain a distance of at least 50 cm between the stove and any combustible material (furniture, walls). The floor must be protected by a floor plate.

How to adjust the air inlet?

The primary air inlet (under the door) controls combustion, the secondary air (above the glass) cleans the glass. Refer to the manual for optimal settings.

Where to find spare parts?

Spare parts (glass, seals, grate) are available from your Supra dealer or on specialized websites. Always use genuine parts.

The stove produces smoke in the room, what to do?

Check that the flue pipe is not blocked, the door is closed properly, and the air inlet is open. If the problem persists, contact a professional.

USER MANUAL TURBINE KT 76 SUPRA

TERTIO - KIT DE VENTILATION - GEBLÄSESET - TURBINE KIT - KIT TURBINA

NOTICE D'UTILISATION

02-14

27369

Exterior view of a black rectangular electronic device with internal channels and mounting holes (no text or symbols)

1. CARACTÉRISTIQUES TECHNIQUES

This product meets the requirements of Community Directives No. 89/68/EEC (Electromagnetic Compatibility Directive), No. 73/23/CEE (Low Voltage Directive) and No. 93/68/CEE (CE Marking Directive).

1. TECHNICAL CHARACTERISTICS

TURBO2 tangential blower, wired, with casing

Power supply	.220/230 V - 50 Hz
Power consumption	.25 W
Max. air flow	160 m3/hr
Noise level	< 42 dBa
Max. speed	2000 rpm
Admissible ambient T°C	.80°C
Maximum instant T°C	.150°C
KT 55 (8/9 kg) - KT 67 (11/12 kg) - KT 76 (13/14 kg)

2. OPERATING PRINCIPLE

The blower kit accelerates the circulation of air inside the fire housing. The warm air is blown out of the front of the fire (when installed as an insert or a closed fire) and/or through the ducts (when installed as a closed fire), allowing the room to be heated more quickly. The circulation of warm air increases the feeling of heat in the room for an equivalent consumption of wood. The thermostat controls the operation of the blower (switching on/off). If the temperature is lower than the threshold set, the blower cuts out (the thermostat threshold is pre-set in the factory and cannot be changed); thus, the pulsed air is never cold air.

3. CONNECTION

Plug the blower kit lead into a wall socket with an earth connection and a protection specific to the device (omnipolar device with a contact opening distance of at least

3 mm in accordance with current electrical regulations). Protect the lead against any risk of damage (pulling out, cutting, burning, overheating, ...).

4. USE

BLOWING SPEEDS

0 Off

II Maximum speed Continuously pulses the air at a high rate. I Comfort speed

Blowing controlled by the pre-set thermostat, silently pulses the warm air. On position I, blowing stops when the stove is out (depending on the temperature).

On position II, blowing is continuous and air is blown at ambient temperature if the stove is out.

Position II allows the room to be heated faster after the stove is lit.

Then select position I to keep the room comfortable and ensure that the blowers stops when the stove is no longer heating.

5. SAFETY INSTRUCTIONS

Do not touch the hot stove when touching the switch, as you may burn yourself.

Switch off the blower before opening the stove (to load more wood,..)

This device is designed for use on a wood stove and must not be used for any other purpose.

Do not touch the device with wet hands.

Do not obstruct the air inlet and outlet grilles.

Do not use this device with a programmer, timer or any other device that would switch it on automatically.

Do not attempt to use the device if it has been dropped, damaged or is not working correctly.

Never take the device apart. A badly repaired device can be a safety risk for the user.

For any problems, please consult your point of sale. If the power cable is damaged, it must be replaced by the manufacturer, the latter's after sales service or a similar qualified person to avoid any safety risk.

KT55: to allow the removal of the fan, replace the 2 sheet metal screw before the 2 screws M5x18. Mounting screws in and the nut on the outside.

TERTIO - KIT DE VENTILATION - GEBLÄSESET - TURBINE KIT - KIT TURBINA