ULE-217A - Loudspeaker Ikegami - Free user manual and instructions
Find the device manual for free ULE-217A Ikegami in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Passive Loudspeaker |
| Speaker Configuration | 2-way Bass Reflex |
| Woofer Size | 17 cm (6.7 inches) |
| Tweeter Size | 2.5 cm (1 inch) soft dome |
| Frequency Response | 55 Hz - 20 kHz (±3 dB) |
| Impedance | 8 ohms |
| Sensitivity | 88 dB (1 W / 1 m) |
| Power Handling (RMS) | 100 W |
| Power Handling (Peak) | 200 W |
| Recommended Amplifier Power | 20 - 150 W per channel |
| Crossover Frequency | 3 kHz |
| Cabinet Type | Bass Reflex with front port |
| Enclosure Material | MDF with vinyl finish |
| Dimensions (W x H x D) | 210 x 350 x 280 mm |
| Weight | 6.5 kg each |
| Terminals | Gold-plated binding posts (bi-wire compatible) |
| Grille | Detachable magnetic grille |
| Finish Options | Black ash, Cherry, Walnut |
| Warranty | 2 years limited |
Frequently Asked Questions - ULE-217A Ikegami
What is the recommended amplifier power for the Ikegami ULE-217A?
The recommended amplifier power is 20 to 150 watts per channel for optimal performance. Using an amplifier within this range ensures clean sound without distortion.
Can I use these speakers for home theater?
Yes, the ULE-217A works well as front or rear speakers in a home theater system. Their 8-ohm impedance and 88 dB sensitivity make them compatible with most AV receivers.
What type of speaker cable should I use?
Use 14-16 AWG speaker cable for runs up to 15 meters. For longer runs, use 12 AWG cable to minimize resistance. Ensure proper polarity (red to positive, black to negative).
Do these speakers require a subwoofer?
While they produce decent bass down to 55 Hz, adding a subwoofer is recommended for deeper low-frequency effects, especially in larger rooms or for music with heavy bass.
How should I position the ULE-217A speakers?
Place speakers at ear level, at least 20 cm from walls to avoid bass boom. Angle them slightly toward the listening position for a focused soundstage.
Can I bi-wire these speakers?
Yes, the binding posts are bi-wire compatible. Remove the jumper plates between the HF and LF terminals, then connect separate cables from the amplifier to each set of terminals.
How do I clean the speaker cabinet?
Use a soft, dry microfiber cloth to dust the cabinet. For stubborn stains, lightly dampen the cloth with water and mild soap. Do not use solvents or abrasive cleaners.
What is the warranty period for these speakers?
Ikegami provides a limited 2-year warranty covering manufacturing defects. Register your product online to extend the warranty by an additional year.
Can I mount these speakers on a wall?
The ULE-217A is designed for bookshelf or stand use. For wall mounting, use a sturdy shelf or third-party wall brackets rated for at least 10 kg.
What should I do if one speaker has no sound?
First, check the speaker cable connections at both ends. Swap the suspected speaker with another to isolate the issue. If still silent, the internal crossover may be faulty; contact customer support.
User questions about ULE-217A Ikegami
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual ULE-217A - Ikegami and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ULE-217A by Ikegami.
USER MANUAL ULE-217A Ikegami
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Ikegami
Model : ULE-217A
Category : Loudspeaker