SD-9500 - DVD player DAEWOO - Free user manual and instructions

USER MANUAL SD-9500 DAEWOO

DVD-VIDEO PLAYER -_ Region code of DVD/ Video player for home is region “2” or ALL. In inserting a disc with other region code, it does not operate. Please only use à disc with region code 20r ALL. - © isa DO NOT mark If this mark is displayed in operating the produd, please wait for a while, then use it. "© DO NOT" mark continues to be displayed in pressing a button after that, it means the button does not function in the currently played disc. - Press a product button on the REMOTE then use theprodudt. + DVD operation : [DVD] button + Video operation :[VCR] button

Contents Product Information Important Safeguards Advantages of This Product Are . Read Carefully before Using Identification of Control Remote Control Connedting your player through extra equipment (satellite system) Connedting your player to the Hi-Fi system How to connect your player to another player, How to connect your player to a camoorder Connedting Dolby Digital Amp with Digital Audio Out Jack … 2nd Scart Socket Basic Operation Initial Installation. Setting time and date/ Auto dock OSD ON &OFF/ Output Sale . DVD Playback VCR Playback Recording . VCR Operation Tuning in New Stations Timer Recording More Functions Connections and Copying EBRE DVD Operation Playing a desired scene Confiming the current PLAY mode on screen Sdecting an AUDIO language, SUBTTTLE languag and 3D AUDIO. Sdecting ZOOM and Multi Angle About MP3, JPEG discs Displaying menus in a disc. Video Setup, Audio Others Setup BÈE The others About DVD... Basic information about VCR and Videotape... Before doubting about troubles (VCR).. Before doubting about troubles (DVD) Specifications … CRETE

Important Safeguards The lightning flash with arrowhead symbol, CAUTION Î within an equilateral triangle, is intended to RIK PAT ñ alert the user to the presence of uninsulated “dangerous voltage” within the products CAUTION: TO REDUCE THE RISK OF ELECTRIC endosure that may be of sufficient magnitude SHOCK, DO NOT REMOVE COVER (OR BACK). NO to constitute a risk of electric shodk.

USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the Literature accompanying the applianæ. MARNING : TO REDUCE THE RISK OF HIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

IMPORTANT FOR LASER PRODUCTS

+ LASER: | This Digital Video Disc Player employs a Laser System. To ensure proper use of this product please read this owners manual carefully and retain for future reference, Should the unit require maintenance, contact an authorized service location - see service procedure. Use of control adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure. To prevent direct exposure to the laser beam, do not ty to open the endosure. Visible laser radiation when open and intertocks defeated. DO NOT STARE INTO THE BEAM. + DANGER: Visible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. GLASS 1 + CAUTION : Do not open the top cover. There are no user serviceable parts inside the Unit: leave al servicing to qualified service personnél. LASER PRODUCT CAUTION: Any changes or modification in construction of this device which are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. + Make sure the unit should be placed at least an apart from the other home appliances or the obstades to get suffident ventilation. + This unit shall not be exposed to dripping orssplashing and no objects filled with liquids, such as vases, shall be placed on this unit. + Switching it off does not disconnect it from the mains (stand-by). To disconnect it from the mains, you have to unplugit. This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard, The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing. This unit is fully transistorized and does not contain any parts that can be repaired by the user. 1 RFAD INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2 RETAIN INSTRUCTIONS The safety and operating instructions should be rétained for future reference. 3 HEFD WARNINGS Allwamings on the unit and in the operating instructions should be adhered to. 4 FOLLOW INSTRUCTIONS All operating and use instructions should be followed. CLFANING Unplug this unit from the wall utlet before deaning. Do notuse liquid deaners or aerosol deaners, Use a damp doth for deaning.

6 ATTACHMENTS Do not use attachments unless recommended by the units manufacturer as they may cause hazards.

7 WATER AND MOISTURE

Do not use this unit near water: for example, near a bath tub, wash boul, kitchen sink or laundry tub, in a wet basement, or near a swimming pool 8 ACCESSORIES Do not place this unit on an unstable cart, stand, tipod, bracket, ortable, The unit may fall, using serious injury to a child or adult as well as serious damage to the unit. Use this unit only with a cart, stand , tipod, bracket, or table recommended by the manufacturer.

A unit and cart combination should be moved with care. Quidk stops, excessive force, and uneven surfaces may cause the product and cart Important Safequards combination to overturn. VENTILATION Sots and opening in the case are provided for ventilation to ensure reliable operation of the unit and to protect it from overheating, These openings must not be blodked or covered. These openings must not be blocked by placing the unit on a bed, sofa, rug, or other similar surface, This unit should never be placed near or over a radiator or heat radiator, This unit should not be placed in a built- ininstallation such as a bookcase or radk unless proper ventilation is provided or the manufadurer’s instructions have been adhered to. POWER SOURCES This unit should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your dealer or local power company. For units intended to operate from battery power, or other sources, refer to the operating instructions.

GROUNDING OR POLARIZATION

This unit is equipped with a polarized alternating - current line plug (a plug having one blade wider than the then). This plug will ft into the power outlet only one way, This is a safety feature. If you are unable to insert the plug fully into the outlet, ty reversing the plug. f the plug still fails to fit, contact your électrician to replace your obsolete outiet To prevent dectric shock, do not use this polarized plug with an extension cord, receptade, or other outlet unless the blades can be fully inserted without blade exposure. f you need an extension cord, use à polarized cord. POWER-CORD PROTECTION Power-supply cords should berouted so that they arenotlikey to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plug, convenience recæptades, and the point where they exit from the unit.

LIGHINING For added protection for this unit during à Lightning storm, or when it is left unattended and unused for long periods of time, unplugit from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges. DISC TRAY Keep your fingers well dear ofthe discas itis dosing. It may cause serious personal injury. OVERLOADING Do not overload wall outlets of extension cords as this can result in a risk of fire or electric shock.

OBJECT AND LIQUID ENTRY

Never push objects of any kind into this unit through openings as they may touch dangerous voltage points or “short-out” parts that could result in a fire or elechic shock. Never spill liquid ofany kind on the unit. BURDEN Do not place a heavy object on or step on the product. The object may fall, causing serious personal injury and serious damage to the product. DISC Do notuse a cracked, deformed or repaired disc. These discs are easily broken and may cause serious personal injury and product malfunction. SERVICING Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

DAMAGE REQUIRING SERVICE

Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following conditions. A. When the power-supply cord or plugiis damaged. B Ifliquid has been spilled, or objects have fallen into the unit. C. Ifthe unit has been exposed to rain or water. D. Iftheunit does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the unit to its normal operation. E Ifthe unit has been dropped or the cabinet has been damaged. E When the unit echibits a distinct change in perfommance:this indicates a need for service. 21 REPLACEMENT PARTS When replacement parts are required, have the service technician verifÿ that the replacements he uses have the same safety characteristics as the original parts. Use of replacements specified by the unit manufacturer can prevent fire, electric shock, or other hazard. 22 SAFETY CHECK Upon completion of any service or repairs to this unit, ask the service technidan to perform safety chedks recommended by the manufacturer to determine that the unit is in safe operating condition.

23 WALL OR CEILING MOUNTING

The product should be mounted to awall or œiling only as recommended by the manufacturer. 2AHEAT The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (induding amplifiers) that produce heat. Advantages of This Product Are …. DVD, VCD, CD, CD-R(MP3), CD-RW, VHS Mätching DVD for recording broadcast Integrated remote control (VCR, DVD) VISS fundion Multiplex sound playbadk/record (SD-9500 only) High Sound Quality of 6head Hi-H (SD- S00only) Simple record function MPfile playback fundion (CD-R disc having records of MP files) GUI Graphiaal User Interface) through OSD (On Saven Display) By using the [DISPLAY] button on the remote control, information on the DVD/VCD/CD player and disc, can be displayed on the TV screen. Savensaver function (DVD) 3D sound (D sound effect using 2 speakers) High bit/ High sampling with 22MEz / Ait video encoder High bit/ High sampling with 96MEz / 24bit Audio D/A Converter Coaxial, Optical digital Audio output (PCM, Dolby Digital, dts) You can enjoy higb-level digital audio by conneding with amp embedded with Dolby Digital / dts decoder. Built-in Dolby Digital decoder (DVD) Analog audio 2-channels output for DOWNMIX (1) Composite video output (1) Slow Forward / Reverse playbadk (DVD) Fast Forward / Reverse playbadk Search of title, hapter and time in DVD disc, and search of time and track time in VCD and CD Various TV aspect (DVD) 453 for Pan and Scan, 4:3 for Letter Box, and 169 for Wide Repeat playback (tle, chapter, and part for DVD/ track, disc, and part for VCD/CD) Seledive Play (DVD/VCD/CD) You œn select and play the desired title / chapter of DVD and track of Video CD/CD in STOP mode. ‘7languages OSD (On Screen Display) fundion (DVD) You can select and display OSD in 7languages. Œ/F/S/G/1/D/P) Parental Lodk function (DVD) ‘This function cn prevent playback of software that may be unsuitable for children. Multi Audio function (DVD) The audio soundtrack can be heard in up to 8 languages. In the case of SVCD or VCD, it depends on the disc. (The number of audio Languages depends on the software) Multi Subtitle function DVD) The subtile cn be seemin up to 3 languages. Inthe case of SVCD or VCD, it depends on the disc. (The number of subtitie languages depends onthe software.) Multi Angle fundion (DVD) This function allows you to choose the viewing angle of sœnes which were shot from a number of different angles. (The number of angles depends on the software) Saren zoomfunction (DVD/VCD)

Read Carefully before Using Cautions in use of DVD-Video player are desaribed below. Pleasered arefully beforeusinga DVD-Video player. + Installation place and handling they may affect pooriy together. + When you plaæ DVD-Video player and TV in the upper and lowersides, itmay œuse flidéering of pidures or failure (ape is not ejected). + When you plaæ this player nearstrong magnetic materials, it may affect image or voice pooriy or damage recording. + Donot spill volatile liquids like insect spray over ‘he player. Do not leave rubber or plastic products An contact with the player ra ong time Th + When theunitis notin use, be sure to remove ‘he disc or tape and tum off the power. +_1f you do not use the unit for a long period, remove batteries in remote control to prevent lealage. + In se you don'tuse the unit foralong time, the unit may not function proper in the future, Tum on and use the player ocasionally.

• Moving + Repadk the unitas itwas originally packed at the fatory. Altematively, pack this product with towel notto be dammaged. + Hect any videotape. ‘ Cleaning + Dustoff dirtin @binet or control panel part smoothly with a soft doth. + Forheavy dirt, soak the doth in aweak detergent solution, wring it well and wipe. Use a dry doth to wipe it out. + Follow instructions in using chemical deaners. + Donotuse any type of solvent such as gasoline orbenzene, as they may œuse deterioration or paint peel-off. Checking + Video is ahigh predsion deviæ. To obtain a dear seen, we recommend regular inspection and maintenance every 1,000 hours of use by technical engineers. + Forchedking, contact your dealer or your nearest service center. *_ Chedkingand Replacement of Antenna + Antennais subject to change in its diredion or damage by wind and rain. For dean seen,

‘contact and consult your nearest service center recordingis performed properiy. We beg you to understand compensation of recording if recordingis not performed by badness of used tape or video. Copyright + Donotuse yourrecordings without permission of a copyrighter excæpt personal usage. Tape and Disc Handling + Donotuse any tape and dischelow. Damage of video head or aut/iling of tape may cause failure, - Tape with mold - Tape or discstained with juiæ or attachments - Tape having breakage connection + Afteruse, store tape verticlly in a æse to prevent loose. + Do notstore the following places. - High temperature and humidity - Subject generation of mold - Subject to direct sunlight - Much dirt or dust - Nearstrong magnetic materials such as speaker Instructions in using REMOTE + Operate remote control within mfromthe unit. + Do notpress 2(wo) buttons at the same time. + Do not light up sending and receiving part of remote control. + Do not keep in the place with much dust and Identification of Controls == Main body (front panel) 0] e]

MIT T © © © © (E] © POWER STANDBY/ON) button Use to powerthe device on/ off if AC power supply is connected. © Place to insert videotape © Disctay © VIDEO INPUT jack © AUDIO INPUT jack © HJECT button Display operation of device. Formoreinformation, se “Operation Display Window” as belows. SELECT button Use to change DVD mode to VCR mode, and vice versa. mn Operation Display Window MER VCR Operation E REC nd TIMER REC dipl EM TobeTimesemoried, EM TobeTimerrecrded state ERROR (No Tape or Tape without tab) dts Disc Indicator Title Thisis displayed in VCD and CD disc. Chapter Thisis displayed in DVD disc. @ SrOPbutton Use to stop playing. @ REWIND button Use to rewind currently being played videotape or disc; or to playback back rapidlly. @ Playbadk/PAUSE button Playback videotape or disc. Press this button to pause a screen. @ FAST FORWARD button Useto wind currently being played videotape or disc orto plaÿbadk rapidly. © OPEN/CLOSE Tray button

Identification of Controls © POWER CORD Itis a jack for supplying power to the unit. © Connection to TV Connedt to outletin a wall. © FURO AVI Jak © EURO AV2/DECODER Jak © VIDEO OUTPUT Jak © AUDIO OUTPUT Jack © DIGITAL OUTPUT OPTICAL/COAXIAL) Jade To enjoy sound quality of theater level in home, connect-this jadk with amp or unit embedded with digital audio decoder. 2Batteries + To purchase accessories or not supplied parts additionally, contact your nearest dealer or service center. But, owners manual and warranty are not sold additionally. Remote Control

É child Loaa!t Pres the pouer [ ] button cf the remote fer about 5 seoonds. No buttons df front pand can be operatedl now and Lock indicator (“1 0[#") will be displayed on window display. To rdense child lock press any button of the remote control. © mvPI MENU button © POWER button © PVPI TITLE /PBC button © wvp] OPEN/CLOSE button, [VCRI EJECT button © nv ver MOVESELECT in OSD, VI Channel Up/Down button © SETUP button © VDIREPEAT Playback button

Setting up your player M Before you start, unplug all the equipment from the mains supply. == (Option 1) - Conneding your player through RF lead Television 23W- Aerial S0GHz ‘The type of axial you: should use, depends on a local interference and how i far you are from the transmitter, You should contact a local retailer if you have any questions about your aerial. Badk view of your player = (Option 2) - Conneding your player through a scart lead 20W- Aerial 5y@Hz Television CO] Badk view of your player —=l With this connection, if your player is receiving CH ARD and your TV is displaying CH3, when you press the TV/ VCRI button on the remote control, your TV will automatically display the CH ARD. “VCR will be displayed. In this mode, to change the viewing channel the [PR] and [PR+ buttons on the player remote need to be used. To switch of this mode press [TV/ VCR] on the remote control, TV remote can now be used as normal. You will get better pictures and sound quality if you connect your player with a scart lead.

Commedtng your player through extra equipment (satellite system) M Before you start, unplug all the equipment from the mains supply. === (Option 1) - Connedting your player through RF lead Téevisé D. _ Aerial You cn use this connection if your player has two scart sockets, This will improve sound and picture quality when you are recording from satellite.

Connedting your player to the Hi-H system How to connect your player to another player Bi Before you start, unplug all the equipment from the mains supply. M Before you start, unplug all the equipment from the mains supply. == How to == Option 1 ; LE pin Aexial 20w- GHz Plug a phono cable into the “Audio L/ R” sockets on the Second player back panel and into the audio sockets on any audio amplifier if needed. your | . | player does nothavethis 1) Insert the tape you wish to record on into the first player and press [OUTPUT] until “AV1" appears on the connection, see page 14. front display.

2) Insert the tape you wish to copy from into the second player. Press the [PLAY] button on the second player.

3) Press the [RECORD] button on the first player.

The player wil start recording. If your player has two scart sockets, you cn use the other sodket “AV2” to connert other equipment. To use this function, see page 15. How to connect your player to a camoorder M Before you start, unplug all the equipment from the mains supply. You œn also use a scrt lead to improve picture and sound quality from your player. mu Option 2 mn How to connect Television Aexial 230W- Plug a scart to phono cable into DE the “AV1" sodket on the back panel and into the audio socket # on any audio amplifier, if needed. Player

If you have connected your camcorder in this way, you cn also connect a start lead from “AV2” on the badk panel of the player to the television. To use this function, see page 15. we une You can also connect the camcorder by using a phono cable if our player has front input sockets. Check the front of our player for this connection, see page 15.

Connecting Dolby Digital Amp with Digital 2nd scart socket Audio Out Jack mn ?nd scart socket If your video has the AV2 output, shown in the diagram below, you can connect other equipment as seen on == How to connect pages 11-13.

2nd sœrt INPUT ONLY INPUT+OUTPUT When connecting other equipment please refer to their manuels for further information. This video manual recommends the set up as shown on page 11. When connected by this method if the equipment is tumed off the video behaves as normal, but if the equipment is tumed on the video will automatically switch over to AV2 mode and displays the channel of the other equipment, channel selection cn only be performed by the other equipment, the video PR4/ PR buttons have no effect. CONNECTING CABLE To return to nommal video use the other equipment must be tumed off. À (Not supplied) û Recording from other Equipment. ë Simple recording can be performed, ensure the equipment is tumed on and is displaying the correct channel. Timer recording, set the video to perfomn a timed recording ensuring AVI is selected as the channél to be (o) © © recorded. Some equipment may have a timer which allows it to be powered on to the correct channel if this core | anonf feature is not available the other equipment should be left powered on. [Home Theater Rarver with Dolby Dig eoding cpablit] vs Oued Front AV @asæ 12° icc0 he font input socket Lis possible to connect devices such as à select either COAXIAL or OPTICAL to connect to amp of Dolby Digital. camovrder to the video. To watch a camoorder tape the video must be in of you want to bout "Dolby Digital”, plesserofer to [About DVD] in Ættp. @ _& AVF mode Roi os put ho same il pags 10 Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories.

ce . . . Initial Installation Setting time and date / Auto dock M Switch the TV on. M You cn also start "AUTO SET" in the SETUP"PR PRESET" — "AUTO SET. == Setting time and date & D tune in new stations (manual tuning) and to enter station names see page 23-24. M Press [VCR] button on the remote control to change into VCR Mode and follow the procedure sm Setting up the player balow. You should see this picture the first time you switch on the TV Call the players "MAIN SETUP”, 1] and player. 1] choose "VCR SETUP", then "CLOCK SET”. Choose your language. ‘Then choose your country. w D rorsdectingthe country, referto the followings. Move to the position you want to change and type in the F3 B: Belgium Eltaly S: Finland 2 Fos es. er ai LS D: Germany LUX: Luxembourg CH: Switzerland ait a few seconds after typing a one-digit number. El DK: Denmark N:Norwaÿ TR: Turkey . F3 E: Spain NL: Naneands Store with [OK] button and exit with [SETUP] button. 5 GR: Greece S Sweden OK for "AUTO SET". 73 | ‘AUTO SET" tunes in all the stations you an receive in your GES œuntry and sorts them in an order common for our country. Clodk is automatically set. PSE MAT «x Setting Auto dock M Auto Co is only available for models with the VPS/ PDC function (see page 25). Some broadsting stations may send the time and date along with the VPS/ PDC data. The video will automatically use this time and date during the initial setting up procedure during normal use, and every time you switch the video off at the mains. f you find that this time and date is incorrect you can remove this feature by following the steps below changing it to OFF mode, you will then have to manually set the time and date, see above. If other stations are positioned on near the current RF OUTPUT AL CHteguidemesage appears automaial. The player recommends the optimal RF OUTPUT CH number automatically. Press the [OK] button to confirm the recommended PR. D Should you wish the stations to have the same numbers as those used on the TV, follow the instructions in "Sorting programme locations’ on page 24. amsonEnEwv exit the basic installation function and enjoy your player. +_ If you don see this picture, because you don t use a SCART cable, search this picture now (CH 52) with the station tuning functions of your TV set (see its user manual). . In case of interference problems on CH 52, type in an other transmission channel between 21 and 69 using the number buttons.

OSD ON & OFF DVD Playback == OSD (On Saeen Display) ON & OFF This playeris setto “OSD (On Screen Display) ON” mode before shipping and you can change to OFF mode. Call the players "MAIN SETUP". Press [O ] button to power on. Press [DVD] button of REMOTE to change into DVD mode. Press [OPEN/CLOSE] button to open the disc tray. Place a disc firmly on the disc tray, making its label look upwardL. Insert the disc and press [OPEN/CLOSE] button to dose the tray. The disc tray is dosed and after checking the disc's condition, Playback or Stop function starts to operate. Choose “VCR SETUP”. And press the [OK] button. To playbadkit, press [PLA Y/PAUSE] button. + Inthe se of DVD, DVD menus and titles are displayed on TV screen. +_Inthe case of S-VCD and VCD2.0 the menus are displayed on TV screen and it is converted into PBC(Playback Back Control) mode. + Inthe se of CD, VCDL1 and MP3, the disc plays in order of its track numbers.

Sdect “OSD ON/ OFF”. If you want OSD OFF mode, select it and press [OK] button to conf. Then OSD characters are not displayed in the normal picture. To stop it, press [M] button. Output Select For pause, press [PLAY/ PAUSE] button in playback mode. If you press this button once more it starts playback again. == To Select DVD Press [OPEN/CLOSE] button to remove the disc. Press [DVD] button. IfDVD mode is correciy salected, DVD on the operation display window is lit. Then, REMOTE button works as DVD function. Press the [DVD] button, then the mode of DVD-Video Player becomes to the OPERATION mode. Various Playback Methods su To Select VCR 1 you want fast forward (or reverse) playback, press [>> ]or[ # Jbutton in Pa VC but sr pk nb natal DVD, are MPa IFVCR mode is corredly selected, VCR on the operation display window = — is reverse playback can beunavailable for certain DVD. Unaveilable for is it and DVD goes out. Then, REMOTE button works as VCR function. in MH you want slow (or reverse) playbadk, press [>> ]or[ #4 ] button in Pause Press the [VCR] button, then it becomes to the VCR OPERATION mode. fUL mode. You can watch the desired screen in the slow forward (reverse) playback. *Forthe case of Video CD, this reverse slow playback function is unavailable. The © mark will appear. == To Select Watch Modes or Extemal Input M Lyou want still picture, press [PAUSE] button in Playback mode. You can watch Press INPUT: the desired screen in Pause status. ‘When you press [INPUT] button, BROADCASTING RECEPTION and EXTERNAL INPUT is selected. But, it is not operated in PLAY, REC and DVD mode.

Press [O ] button to power on. Press [VCR] button of remote control to change into VCR mode. Insert the desired tape. If you want to playback it, press [PLA Y/PAUSE] button. When the operational status is flikering or poor, adjust it with [TRACKING #-Jbutton. To stop it, press [M] button. For pause, press [PLAY/ PAUSE] button in playback mode. If you press this button once more, it starts playback again. Press [EJECT] button in the front part or [OPEN/CLOSE] button on remote control to remove the tape. Various Playback Methods EL 1f you want fast forward (or reverse) playback, press [>> ] or [ # ] button in Playback mode. You can watch fast playing (rewinding) screen. M Hf you want Still pic, press [PLAY/ PAUSE] in Playback mode. You can watch the desired screen in pause status. M ff you want slow-motion playback, press [>> ] button in Pause mode. You can watch the desired screen in the slow forward playback.

• NOTE: VCR doesn't have Slow Reverse Playhack function. If you want to watch a series of screens one by one, (FRAME ADVANCE) press INEXT®M ] button in Pause mode. Each time you press this button, the picture advances one frame. To Adjust Display This product indudes automatic Tracking function and enables users to enjoy dear pidure without an additional operation. Provided that the following problems can be solved by the manual adjustment, which improves display quality. (During automatic display adjustment, “Adjusting Display” are displayed on TV screen.) - If the screen is poorin Playback mode, - If noïses oœcurin the upper or lower part of screen in slow playback mode, - If paused pidure vibrates up and down. Use [TRACKING + -] buttons of remote control to adjust the display suitable for Lwatching. Recording == To Record With VCR Press [0 ] button to power on. + Press [VCR] button of remote control to change into VCR mode. Insert a recordable tape. Insert atape with recording tab. With ICHANNELL INUMBER] and [OUTPUT] buttons, select the desired broadeasting channel or extemal input unit to record. Seledt the desired speed (SP or LP) with [SPEED] button. Press [REC] button. Then, it starts recording. If you want to pause recording, press [PAUSE] button. After pressing [PAUSE] button, if the pause status continues for five minutes, the recording is released automatically. To exit recording, press [STOP] button. mn To Enjoy Another TV Channel or DVD during recording L_ 1 you want to watch another TV channel during recording with video, press ITV/WCRI button. Itis available of changing into and watching another TV channel. 2 1f you want to playback DVD during recording with video, insert a DVD disc. Place the desired DVD disc on DVD tray, press [DVD] button to convert OUTPUT into DVD mode and press [PLAY] button. Then, you can watch DVD.

== To Copy From DVD To Videotape L_ insert the desired DVD disc. When it is a DVD discwith copy protect function, you can't copy it. Insert a recordable tape. 2 Press [REC] button during playingof DVD. DVD plays and VCR starts recording. 3 if you press STOP [I] button in DVD mode, DVD and VCR will stop at the Same time. If you press STOP [M] button in VCR mode, VCR stops to record and DVD continues to play. This product incorporates copyright protection technology that is protected by method daims of certain ULS patents and other intellectual property rights owned by. Maavvision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. = One Touch timer Recording (OTR)

A When your urgent business happens suddenly in watching TV or you want to record the current TV program for the desired time, follow the procedures below. 1 irst follow the steps 1 to Ain “Recording With VCR". 2 Press [REC] button as much as you want. See the “Recording Times Table” below. Onœæ continuous recording until you press STOP button Twicæ recording for 30 mins from current time 3times) recording for 1 hour 9 recording for 4 hours 10 retumingtothestausofOnœæPress 3 ro stop Recording mode, press [STOPI button more than 5 seconds. ‘Tuning in New Stations M The TV and player are switched on. m Do se the picture from your player, press the station button on the TV reserved for player input or the AV (Audio/ Video) button. M "AV1/ 2' should not be selected with the AV button on the player = Tning To complete the set-up of your video recorder when the auto set has not stored all of the channels or when you wish tostore a new channdl. Call the videos" MAIN SETUP”, choose "PR PRESET". Select "MANUAL SET". Choose any unused location number "-—" or "P-xx' Its simplest to use the same location number on both the TV and video. Setthe station you want: + the programme location number: + the broadcast system you want (Aerial(CH) or Cable(CC)), + You can dirediy enter the real channel number with the [Oo 9] buttons, or search by pressing [< / >], + The finetuning you can adjust, + When the program is encoded (and you have a decoder connected to socket EURO AV), press the [<or >] to select ON or OFF. + Change or create the station name. Once you see the station you want, store it. Tunein further stations (from step 3 onwards) or ext tuning mode.

Tiningin New Stations == Station names B Éyour player is showing no station name or is showing a station name incorrect, you can correct this. Call this menu (just see the previous page), 1 ifitisn't displayed. Select NAME position. Press the [0] button to change the given name. Or press the [1] button to create the station name. Either select the name from the stored list or you 2 create the station name and enter a 4-digit name. Change the letters with the [PR + -] buttons, move to thenext letter with the[</ >] buttons. 3 Store and exit. == Sorting programme locations Ifthe location numbers used for programmes stored in your TV and player are different, you can change them on the player. To do this, move the stations to the right numbers, until they are arranged the way you want. 1 Callthe playe”s' MAIN SETUP", choose "PR PRESET" then "PR ALIGN".

2. Select the programme to swap.

Confimm by pressing OK button. Move the station to the desired location number. Conf by pressing OK button. == Clearing programme locations À Caïthe players "MAIN SETUP", choose "PR PRESET" then "PR ERASE". 2 Select the station (location number) you want to dear. Review the picture by pressing [<] button. Clear by pressing OK button.

Timer Recording Œ Fortimer recordings, dock, date, and stations must be set corredly. Hi Load a cassette with its safety tab in place and with suffient free space for the recording. ms Timer recording using ShowView (SD-9500 only) Call the ShowView menu by pressing PROGRAM on the remote control. 1] From your TV magazine, type in the number next to the programme you want to record … Decide if you want to record "ONCE", "WEEKLY" or "DAILY"... If you wish to make changes: Move to the position you want to change using the [</ >] 3 ts Change the setting using the [</ >] or [number] buttons. If all setting are ok, press [ok] till you see “OK: CONFIRM" in the bottom line. Confimm.

+ VPS PDC is service provided by some stations to enable you to perform timer recordings precisely even if the broadcaster délays the start time of the programme slightly. The time you: enteris the VPS PDC time so must be correct. Not all stations offer VPS PDC, in which case the player will start at the time you enter and not the actual start time of the programme. If you wish to start recording at a specific time without it being adjusted by the VPS/ PDC system in the event of a delay, switch VPS PDC off otherwise the player will not record. If you don't have the ShowView numbers see next page for the normal timer. If you have made a mistake, move back to the relevant position with the [<] button and change the setting. Ifthere is no programme location displayed under “PR” in the change menu, the player doesn't yet know the location number for the programme you want. Type itin and this will be stored forlast recordings. If you wish Lo record from a satellite recaiver, select under “PR! the satellite programme location or AV (1/ 2) (depending on the connection with the antenna cable or the SCART-cable). Leave thesatellite tuner switched on and to the programme you want. + Should programming overiap, you get a waming. To canoë the recording press the 1! button (stop) more than 5 seconds. + ShowView is a trademark applied for by Gemstar Development Corp.. The ShowView system is manufadured under license from Gemstar Development Corporation.

Timer Recording Time Recording M For timer recordings, dock, date, and stations must be set correcily. M Load a cassette with its safety tab in place and with sufficient free space for the recording. = Nommal timer recording sms Timer Review - changing and erasing Call the player's "MAIN SETUP", choose "TIMER PROGRAM". Decide if you want to record "ONCE", "WEEKLY" or 1] "DAILY"... Call the players "MAIN SETUP", choose "TIMER PROGRAM".

‘Type in one after the other: + The programme location number: D. : thetime the broadonst tas, + thetime the broadcast ends, Select the programming to change or erase. If you want to erase this programming press D. him (OL omfimwin OR If you wish to make changes: the day ofthe broadcast, ifitis not today. Move to the position you want to change using the + Salect LP if you wish to make a very long recording . [<, >buttons. + Switch off VPS PDC hereif you need to . Change the settings using the [PR 4 -]or Inumber] buttons. Ifall settings are ok, press [<or >} until you see "OK: CONFIRM'" in the bottom line. Confinm changes with [OK]. Exit the menus. If you wish to make changes: Move to the position you want to change using the [</ >] 3 buttons. Change the setting using the [PR+# - 1 or number] buttons. If all setting are ok, press [<or >], till you see “OK : CONFIRM" in the bottom line. Confim.

+ Waïta few seconds after typing a one-digit-number. *_If you have made a mistake, move to the position you want to change using the[</ >} buttons and change the setting. + Ifprogramme timings overlap, the machine will give a waming message. If you don't adjust thetimes, the machine will record the first programme completely then continue with the second one. +_ Ifthereis no sufficient free space for the recording on the cassette the video switches automatically to “LP” for double recording capacity. +_ The recorder will éject cassettes which have the safety tab removed.

More Functions M The counter counts in real time from the point you load the cassette. This does not have to be its beginning! The œunter does not count unrecorded parts of the tape. B Éyou rewind beyond the zero position, the counter counts in negative values (e.g. - 0:01:15). Clock / œunter display Each time you press [DISPLAY] button, 1x: Time and datetourrent status — Time and date 2x: Counter+current status — counter Sc disappear. But if you press [CLK/ CNT] button, dock and counter on display window will change each other. +_Ifdidn'twind tape (PLAY, FE REW...) it doesn't appear the tape remain time. + _ In case that the timer recording information is inputted in the received broadcasting signal, press the button to display the VPS/ PDC icon. = Remaining time and cassette length + Remaining time display is only possible when the cassette is loaded. When you want the playerto show the time remaining from the current player tape position (to find out if there is sufficient space for a recording, for example). To ensure the remaining time shown is accurate, select the length of cassette currently loaded by salecting this function until you reach the correct length. EE À coessing counter zero position The player will wind to the position 0:00:00 and stop. roro = Resetting the counter to zero COUNTER RESET Reset the counter.

Dimmer: Your player dims its display when switched to stand-by mode. Auto poweroff : Your player switches to stand-by when no tape is played and no station is received for more than 5 minutes. ms 16: 9 Wide Screen Format Playing back / Recording You can play and record the program of 169 Wide-Screen format with this player . + 169Set Auto :This video automatically detects the program format (16:9 or 4:3) and records or plays this program in the same format. -ON : The video will play or record ll broadcasts in 16:9 format. 433 broadcasts will be converted to 169 format. -OFF: The video will play or record all broadcasts in 4:3 format only. +_ If you watch a program which is recorded by 16.9 wide screen format with this player, your TV must have 16.9 wide screen function and you have to connect TV and player with the A/ V scart. sm AUTO REPEAT If you press the [PLAY] button for Ssecs during stop or still mode, it goes Auto repeat mode. This player plays repeatedly the tape from the beginning to end parts. To release this mode, press the [ © ] button or mode operation button. (PLAY, FE, REW or STOP) mx SETUP languages Call the players "MAIN SETUP”, choose "VCR SETUP”", then "LANGUAGE SET".

Select your language. Confim. ms Child lock Press the [ © ] button for about 5 seconds. No buttons of front panel can be operated now and LOCK INDICATOR (“LOCK") will be displayed on window display. Keep your remote control in a safe place. To release child lock, press any button of the remote control. En Cassettes VHS) Use only good quality tape cassettes with the VHS logo. +Keep cassettes away from excessive moisture or dust, magnetic and dectrical fields Cloud speakers and computer monitors, for example). +Always wind the tape to the beginning when you have finished. Store with the full spool at the bottom and with the cassette in its cover. You can protect your predious recordings from being wiped by breaking out the safety tab on the side of the cassette (some cassettes have a slide). Should you wish to reuse the tape after removing the tab, cover the hole with adhesive tape.

Ferre Connedtions and Copying un The player machine records the complete sound signal transmitted by the TV station. : En payer VCR, you will hear ol mise te w M you areusing a SCART cable, select the AV input on the TV to see the picture from the player. l M you are not using a SCART cable, select the button number on the TV reserved for video input to = The Hi-H system (SD-5000n1y) see the picture from the player =" To the TV via antenna cable (if you are not using a SCART cable) If you are not using a SCART cable, your player can transmit pictures and sound to the TV via the coax aerial In addition to the normal mono sound track of VHS video recorders, your player machine is equipped with a high-quality Hi-F sound system. cable. Just tune the TV to the players transmitting channel (factory set to UHF CH 52). Tune the TV carefuly to ‘This means you can enjoy. ensure the best pictures and sound. + films with excellent stereo sound + films of full-length concerts in high quality stereo Once you have carried out the steps in "Connecting up the player”, switch + films with impressive Surround Sound using additional Surround equipment on your TV. + films with two dialogue modes (dual, bilingual), usually the original sound track and dubbed sound track Press the [OK] button of the players remote control longer than 5 seconds + VHS cassettes with Hi-Fi stereo sound and VHS cassette with normal sound. to call the player‘s test picture. Tune the TV to the test picture using the channel pre-set functions of your == What you can listen to SD-50only) ‘TV as desaibed in its manual. When you have found the test picture, store it under the button number on x - = jour TV for player input. During Sop, the player displays what he current station is broadcastng. When Press the [OK] button of he players remote control again longer than 5 you switch to another station or the current station changes the sound mode, your seconds to release the test picture. player displays the programme and sound mode on screen (if not, press AUDIO). STEREO” =stereo = < . pe + Ifthe quality ofthe test picture transmitted to the TV is poor due to = BIL1/ BIL IL" =iingual interference œused by a station transmitting on channel 52, you can tune = nothing=monsural sound the player to a different transmitting channal. Find a free channel É betseen 21 and 69 on your TV. ë During Playback, the player displays whatis recorded on Call the player‘s"MAIN SETUP" choose "VCR SETUP" then ‘RF Ë the cassette (iFnof, press AUDIO). OUTPUT ST”. + “Hi” =stereo/ bilingual Typein the free channel. nothing =monaurel sound Sore and ext +_Ifthe quality of the test pidure transmitted to the TV is poor, fine-tuning on the TV may help (refer to the TV manual). == Choic of sound output (SD-9500 only) +_ Without a scart cable, you will not get stereo sound from a TV capable of stereo sound. During stereo performance (playbadk-"Hi-Hi"/ broadcast -"STEREO"}: Hi stereo —> left audio channel only —> right channel only — the normal mono sound track of a Hi-Fi cassette + During broadæsting a bilingual performance : Main language (original sound tra&) —> sub-language (ubbed) > both main language and sub-language > OFF. + Formono performances, there is no choice available.

Cornections and Copying Pl . a 1 . 1 Æ Switch off all components when connecting or disconnecting cables. = To skip sœnes in a disc DVD vo! vof œo| mr| == Copying To move to next chapter (or trad, press [PP1 NEXT] button. To copy to our player from another video HA tue machines with à coble ‘The œurrent chapter (or track) moves to the next chapter (or trad). Other VCR between their EURO AV (SCART) sockets and Decoder for Pay-TV select as programme "AV 1/ AV 2° or“E. AV" Press [K PREV] button. Camoorder front sockets) using the [AV] [PR -lor[ © ] ‘The current scene moves to the previous chapter (or trad) or first scene of current Video Player button. chapter (or trad. Satellite Reciver Setthe other video machine to playback and your machine to record. «To connect a mono audio source, use the front Audio In sodket marked L. To copy to another video machine from your player, connect the two machines by means of their EURO AV (SCART) sockets. On the other video, select its AV input and set the machine to record. ji n sed ti Sith your player t play back at the postion you sms Directly moving to a desired title bw| vol want copying to start. Cher VCR) devices M Some movie discs may contain multiple titles. the disc has a movie title menu recorded ont the [TITLE PBCI or IMENU] button can be used to select the movie title. Détails of operation may differ depending on the disc used.

• Sdectinga titlemay not beavailahle an catain DVD discs. Press the [TITLF/PBC] or [MENU] button. ms Assembling À Aistoretites on the discis displayed. Should you wish to assemble your own film, from camoorder footage for example, use the assembly technique «For the case of VCD disc, menu screen will or smooth edit points: appear only when the disc has PBC function Z and PBC ON is activated. S +" Movethe tape to the position at which the new e En __ _ : in ant gere à Press the [ENTER] button or [PLAY] button E] Win ly before the edit point and put after pressé <> À V J button the machine into pause using the [PAUSE] button oo 2 Te Le, ! ® (o not press STOPD. The salected title now starts playing. + Now go directly into record. prets tomrocmmtonvats | MS you are recording should already be playing back when you start recording.

En Playing a programmed order i a nf vol © == Repeating a defined period from A to B pvwof vol cf ie STOP ox Pia pr | M You may repeat a defined period from A to B. [PROGRAMI mi ci Es our : Atthe point where you want to start the repeat While the right figure is appearing, please a æ ED à 03 ds my playback, press [A-B] button. La 1m : input desired Title and Chapter number with = A nttergestol Theright figure appears and repeat playback start FD rom mre NUMBER buttons, Press [ENTER] to a , Sama 1oB. position (A) is set. teansriothe memorize, Then input next number. Sera parts and XIn œse af VCD and CD, pese input TRACK Atthe point where you want to end the repeat pr (GEAR N playback, press [A-B] button again. cela a » Therepeat playbadk end position (B) is set and a \fter completing setting, press [PLAY] button. defined period from A to Bis playbadk repeatedly. “Then, titles and chapters (Had) are played in the above-programmed order. To exit from Program Play mode, press [PROGRAM] button. To exit from repeat playbadk mode, press [A-B] button. La lorr Ienters into Normal Playback mode. = Repeatinga defined period ovw| vof cf ml Each time you press [REPEAT] button in playbadk mode, repeat playbadk starts as below. mx Searching DVD with a title number, a chapter number or a time pvo| +DVD+ +VCD+ +cD+ + MP3e RES + [a] DES + [5 Em + ] « If you want to search with atitle number, press asrettite ISFARCHI] button one time. ? 5 me al DE [PRES ESDES Itshows current and total title numbers. Please enter {© [6700 g the new title number to be searched using the ; [OISE Le SFR [LE IE LE JMANESN [NUMBER] buttons. using rate Es EC LE IR ê If you want to search with a chapter number, art capter 8 press [SEARCHI button twice. Hit + L2. CHAPTER: Current chapter will be repeatedly playback. Itshows current and total chapter numbers. Lo ones G + La TITLE : Current title will be ropeatedly playbadk. Please enter the new chapter number to be searched nu ED 2 rack :Cumenttradwil berepoateciy pleybadk. using the [NUMBER] buttons. Print + Le DISC : Current disc will be repeatedly playback. + Læ_ RANDOM: Trads in the disc will be playback in random order. TE you want to soarch with at + L_ FOLDER: Current folder will be repeatedly playback. ISFARCH] PES ss

OFF: Repeat playback will be cancelled. Please enter the new time to be searched using the ë INUMBER] buttons. In completing entering, please press [ENTER] button. PLAY starts from the selected position.

are Confiming the anrent PLAY mode on sareen == Searching VCD, CD and MP3 with a track or track time vof _c M3 ms Confirming the aunrent DVD disc mode Dvo| If you want to search with a track number, press While in playing, press [DISPLAY] button. 1] ISEARCHI] button one time, ane trak Itshows the current disc mode. . ee If you want to change the mode, select the item with up/ down cursor and enter the In case of PBC OFF, the screen like the right fi : proc appears. Itshows current and Walt Le Ioonoss nes seing wi Inumberl, [< or [>1 button. In compléting entering, press [ENTER] numbers. Please enter the new tradk number to " be using the [NUMBER] button. tot trace To exit from Display mode, press [DISPLAY] button again. *Ifitis PBC ON, pressing track number converts PBC t0 OFF mode autamatically. un " = demdnmteraanettite/totatitenurber you want to search with a track time, press button twi VE | + coma rurber atarert drpter/ tot opter rente 2 See ex63:20 CR - In case of PBC OF, the screen like the right figure 4 Vo appears. Got me UT | + cronntrtanetatitie/ttaatttenntr/attitestetel It shows total track time. 1/3 ENG + den nunbe à arret ao lagee/ tot audio langegenunber / audio lang ee secte Please enter the new time to be searched using the = rpat patate [NUMBER] button. = damdrumber start aroie tit angenurter In completing entering, please press [ENTER]. 3 PLAY starts from the selected position. ms Confirming the aurent SVCD/VCD2.0 disc mode vou svcn| ‘While in playing, press [DISPLAY] button. Itshows the current disc mode. If you want to change the mode, select the item with up/ down cursor and enter the new settings with [number], [<] or [>] button. In completing entering, press [ENTER] button. To exit from Display mode, press [DISPLAY] button again.

Gina PL menenen Selecting an AUDIO language, SUBITTLE language and 3D AUDIO mx Selecting an audio language DvD 1 The user may select an audio language and subtitle language if a disc indudes Mult-language. == Confimingthe aurent VCD, CD, MP3 JPEG discmode (ÿcp| Loœf ms| Jrec| While in playing, press [DISPLAY] button. à Keep pressing [AUDIO] button till the user's preferred language appears in Itshows the current disc mode. eo If you want to change the mode, salect the item with up/ down cursor and enter the À artain disc dent a new settings with [number], [<] or [>] button. In completing entering, press [ENTER] may not support audio button. set æsubtitlesdet If DVD discindudes audio information, every time the user presses [AUDIO] button, To exit from Display mode, press [DISPLAY] button again. English (ENG), French (FRE), Spanish (SPA) and others appear one by one. tt acto Lrgagenrter drénntertanet | anatadolmgege aiolrange “ir channel number at current track / total track number _< | 01/03 ENG — time dlapsed auDi LE D repeat playback mode anetadodpe =“ Selecting a subtitle language DVD Keep pressing [SUBTITLE] button till the user's preferred language appears in playbadk mode. If a DVD disc indudes subtitle information, every time the user presses [SUBTITLE] button, English (ENG), French (FRE), Spanish (SPA), … and OFF appear one by one. cher rurrber at arert atütelngog 4 amrtastiterang _æ|o103 ee a è < totai aétitie a lanpecererber ©

=“ Selecting 3D Audio po| vof œ| M Sound Fields can be set. 1f you want to adjust Sound Fields, press [3D]

button. Every time the user presses [3D] button, a 3D sound changes 3D ON> 3DOFF > 3DON.….oneby [na one.

• Fartheae of Every time the user presses [ZOOM] button, a zoom Press the DVD open [OPEN/CLOSE] button, the disc:tray opens. SVCD amd VCD, magnification changes 2 times (X2) > 4times (X4) Put a disc containing MP3, JPEG files on the disc tray with the label side up. es — OFF — 2times (X2) — …oneby one. Press the DVD open [OPEN/CLOSE] button, the disc tray doses. svailelle A base point to be enlarged is œntre and the point can *'Duragéämezo be changed with the operation of[< > À V] The unit will take a short while to load the disc and display the directory structure. subtitlelanguege button, can't besen. The below figure appears. Select your disctype. mu Different Angle pvo| Movethe cursor to FILTER by pressing [< > À v] Uo button. Gare M La disc indudes multi angle information, the user can watch a screen in multi angles. The function is limited Keep pressing [ENTER] button il the user's Br to a DVD disc supporting multi angle information. preferred disc type. Every time the user presses = = [ENTER] button, disc type changes MIXED —> MP ferxr ce Keep pressing [ANGLE] button till the prefere Leger are ONLY — JPG ONLY — MPSAND JPG —> RL - angle appears. ‘ MIXED — …oneby one. © Every time the user presses [ANGLE] button, an angle Le 175 E d tive order. à legrees changes in a consecutive order. tas srenenge Select the repeat playback mode. — ê Movethe cursor to REPEAT by pressing [< > À v] | £ button. Gare Keep pressing [ENTER] button till the user's Doi--03 preferred repeat playback mode. Every time the user fo presses [ENTER] button, repeat playback mode nent Ta changes OFF — TRACK — FOLDER — SUR on RANDOM — OFF — …oneby one. a Select the folder. Fes Move the cursor to desired folder by pressing DE L< > À V Jbutton and press [ENTER] button to Don-o2 cœnfim, Do-03 wwe D AV ommens 40 a

Seledtthe file to listen to (or view). CPC TES Move the cursor to desired file which you want to (=) listen to (or view) by pressing[< > À VIbutton | Sion ee and press [ENTER] button to confirm. The selected JT FILEOPEN--03 file will be playback. Top te diet are, pres [MENU] tion in ane sepme Pres [MENU] tien agi tome

oo LI AVAD evrenment M Play and Pause Press the [PLAY/ PAUSE] button to switch between play and pause. M Search foratradc ‘The [SEARCH] button works on MPY JPEG discs as well as VCD/ CD audio.

• In se [SEARCH] button is presse in playback mode, falder tree view disappears and search bar is dial = Tostop playback Press the [STOP I] button. = Toskip to the next or previous file + Pressthe [1 NEXT] button ofthe remote control briefly while playing, to skip ahead to the beginning of the next file. Each time you press the button consecutively, the beginning of the next file is located and played back. + Pressthe[ KK PREV (Previous)] button of the remote control briefly while playing, to skip badk to the beginning of the previous file. Each time you press the button consecutivey, the beginning ofthe previous file is located and played back. A] Me tiity of this unit to mad MES is 1 dependent on th foloninge + The Bit Rate must be within 64-256 Kips. + Thetotal number dfiles on the disc should not excrrd 200. + Themaimumnumber of directaries should not excrrl 32. + Themaimum depth levé cf direrteries should not excoed 4. + lenames should He name using 8 or fewer Letters and/or nur, and must incorporate the “MP3" file extension. EXAMPLE: ms, MP3 where ec» is a letter or nur. {Use only Iéters and or numbers in file names. If you use sperial drertes, thefile and/or folder names may not be displayed correctly en the on-screen display. + Wen remording on CD-R disrs, use 74- minute (650M) disrs. Do NOT use 80 -minute (700M) dis + TheCD-Rœ CD-RW dises should be written using the ‘disc at once method. ‘The ability of this unit to rend JPEG discs is dependent on the following: IEJPEG fileis morethan 2MB, the playback of file by pressing [ENTER] button may be impossible and'sliding image may besképperl. If you press [PLAY] button in JPEG imege dirertiy without pressing [ENTER] button, siding screen will beviener automatically from that image Tostopiding image press [STOP] button. Pressing [STOP] and [PLAY] button again makes hescreen go to first list. +" The MP3/PEG file should be made with proper format. Displaying menus in a disc ms To display menus in a disc M fa disc indudes menus, the user may use them. nf 1ouf Press [MENU] button. + In case of a DVD disc, it shows menus in the disc. Also they are different according to discs. (“Retum” will appear on the OSD with VCD20.) + _Hfitisa VCD20, select PBC ON mode by pressing [TITLE/ PBC] button.
• CD and VCD1.1 do not support the function. Ifitis a DVD disç move à Cursor to a relative item with arrow buttons of [< > A V ]button and sélect one with [ENTER] button or [PLAY] button. Ifitisa VCD 20disx, it shows menus in the disc by pressing [ENTER] button.

Language Setup M A user can set OSD language, Audio, Subtitle and Disc Menu. ÉÙ -o50- mors On Sen Display” While STOP ar RESUME STOP, press ETES ven fo ano ones ISETUPI button. OSDLANGUAGE nos DO SH SUBTmE ENGLISH DSCHENU ENGLISH Selecing a OSD language. Please select a language to be displayed on DVD screen. LR EEE Every time the user presses [ENTER] button, OSD LANGUAGE changes ENGLISH — FRANCAIS — … oneby one. Seleding Audio language. Setit as the preferred audio language. In case the audio language is set and recorded in the DISC, itis automatically played in the set language in every playing. For example, English is set and recorded as audio language in the DISC, itis played in English. Every time the user presses [ENTER] button, AUDIO LANGUAGE changes ENGLISH — FRENCH — > AUTO oneby one. Seleding Subtitle language. Please set it as the preferred language. In case the subtitle language is set and recorded in the DIS, it is automatically played in the set language in every playing. For example, English is set and recorded as subitle language in the DISC, itis played in English. Every time the user presses [ENTER] button, SUBTITLE LANGUAGE changes ENGLISH — FRENCH — > OFFoneby one. Seleding Disc Menu language. Please set it as the preferred DISC MENU language. In case the DISC MENU language is set and recorded in the DISC, it is automatically played in the set language in every playing. For example, English is set and recorded as a DISC MENU language in the DISC, it is played in English. Every time the user presses [ENTER] button, DISC MENU LANGUAGE changes ENGLISH — FRENCH — one by one. Video Setup M A user can set up a connected TV condition and screen. While STOP or RESUME STOP, press ISETUP] button. Selecting TV Aspect. Every time the user presses [ENTER] button, TV ASPECT changes 43 LB —> 169 WIDE —> 43PS — ….oneby one. If a user selects “4:3 PS”, the user can watch only a œnter of the original scene of “169”. If a user selects “4:3 LB”, the user can watch the original soene of “16:9”, but the top and bottom of the screen look black color. If à disc size is originally recorded in 43, a user cannot watch it in a wide screen though a user sets a size as “16.9 Wide”. Audio Setup M A user may select audio menu according to a user's speaker set. While STOP or Resume STOP, press ISETUP] button. DGIALOUT — EITSTREAN

Select a Digital Output. Every time the user presses [ENTER] button, DIGITAL OUT changes BITSTREAM — LPCM — BITSTREAM — one by one. Set output conditions to coaxial or optical terminal. You can set following two values of digital output: + Bitstreamx The same signal as audio signal recorded in disc goes to digital audio output terminal. + LPCM: Decoded audio signal goes to digital output terminal. Select a Dynamic Range. Every time the user presses [ENTER] button, DYNAMIC RANGE changes OFF — FULL — OFF — .…oneby one. + Set "OFF to view a program in the dynamic range as recorded disc. + If you hear loud sound softer and soft sound louder, set “FULL”.

Others Setup “Parental Lock” ativates only if you set a password and theunit goss into Lock status, When the disc es no parental function even ifthe disc fer adult only, Parental Lock doesn't activate

While STOP or RESUME STOP, press ISETUP] button. Select character display window. Select "On" to make OSD(On Screen Display) language displayed in screen. Select sareensaver. Ifbright soenes continue to be displayed in screen, TV can be damaged. Set thescreensaver to "On", the screensaver functions automatically and DVD logo moves continuous if the resume stop, stop, open status is maintained for about 5 minutes. Select defaults. If you select defaults, every function set retumns to FACTORY Defaults except Parental. Select Parental. Press [ENTER] button when the cursor is located in PARENTAL. When “INPUT PASSWORD” appears on the screen, input the password. Change the level of Parental. With right password, you can change the PARENTAL by pressing [ENTER] buttons. Every time the user presses [ENTER] button, Parental changes KIDS — 2G — 3PG —

APG-13 > 5PG-R > 6R —> 7NC-17 >

8ADULT one by one. Itconsists of 8levels of parental control, violence, sexual scene, strong sexual scene and others to protect children from watching those scenes. Changing a password. Forthe change of auser's password, please move to “Change Password” and enter new password. About DVD mm Playable Disc + DVD, Video CD(Version 1.1, 20), SVCD and Audio CD Disctype | Playable | Restriction DVD Possible _ | Region number 2or Region number All Video CD Possible _ | Version 1.0/ 1.1/ 2.0, SVCD/ CVD cp Possible | PCM ordts CD-G Possible _| Only Audio playback CD-ROM Possible | MP3Fle CDR Possible _ | _ Video-CD/ CD/ CD-ROM (MP3 File) CD-RW Possible _ | _ Video-CD/ CD/ CD-ROM (MP3 File) DVD-R Possible | DVD Video DVD-ROM | Impossible DVD-RAM | Impossible DVD+RW | Impossible Photo CD _ | Impossible

REGION MANAGEMENT INFORMATION

This unit is designed and manufatured to respond to the Region Management information that is recorded on à DVD disc, The region number of this player is “2”. If the region number described on the DVD discs does not correspond to the Region number of this player, the player will not play this disc. This player will play DVD discs made for “ALL” regions. Therefore, this player will play DVD discs marked with labels containing the region number “2” or "ALL". 2 AL (Region 2) {Region ALL) «= Tenms related with DVD DvD A DVD (abbreviation of Digital Versatile Disc or Digital Video Disc an indude 135 minutes of video information. And for audio, it can hold up to 8kinds of languages and 32 kinds of subttle languages. By using MPEG-2video compression and digital 3D surround sound, DVD realizes high-defined screen and quality sound like a movie theater. cDDA A CDDA (abbreviation of Compact disc digital audio) is a music disc that is currently used. MP3 Audio compression format that enables audio files to be stored and transferred on à computer with à rélatively smal file size. It enables you to enjoy CD quality music. (Short for MPEG-1 Layer 3) PBC Thisis resorded on a Video CD 2.0, Video CD 30, SVCD and CD. The sœnes or information to be viewed (or listened to) can be selected interactively with the TV monitor by looking at the menu shown on the TV monitor. It stands for PlayBack Control.

About DVD CHAPTER __Itmeans theinfommation recorded in a DVD. A title in a DVD is divided into many tracks, of which track is called as a chapter. À certain scene of a screen can be quickly searched with the chapter number. TTILE It means the information recorded in a DVD. A DVD can be divided into may titles. TRACK __ Itmeansthe information recorded in a video CD and audio CD. A disc consists of many atrack, for which auser can search a certain position. ds Digital Theatre System is a 5.1 -channd surround sound system, which is widely used in movie theatres around the word. It enables the bit rate to be increased to provide good sound quality. “DTS" and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc. Multi Angle Some DVD discs contain the various soenes that have been simultansously shot from a number of different angles. PCM Linear PCM is a signal-recording format used in a CD, while CD is recorded in 44.1kHz/ 16bit, a DVD is recorded in 48KHz/ 16bit up to %6KH/z/ 24bit. Dolby Digital Dolby Digital enables the delivery of mono through 5.1-channel audio at data rates from 32 kbps to 640 kbps, thus offering flexibility and economical performance as well as uncompromised sound quality. Bitstream Digital audio data that is decoded into an analog signal for subsequent output to speakers. LuRt Itindicates L/ Rof Dolby Digital 2CH Downmix output. Downmix | DOWNMIX is reproducing the proper audio when audio format recorded on a disc differs from the output audio channel configuration. For example, with just one stereo speaker system you can hear full 5.1 channel audio. RGB This stands for red, green and blue. It means the video signal separated into its three primary colour components ready to drive the picture tube almost direct. Two signalling connections are needed to make the television accept the synchronisation and RGB signals. AI this is in the SCART connector. Not all televisions have RGB inputs. SCART Anacronym (Syndicat des Constructeurs d'Appareils Radiorécepteurs et Téléviseurs) for a connector used with many kinds of audio-visual equipment. I is also called Peritel and Euro- connector. En Handling Disc +__ To keep a disc dean condition, please do not touch a side containing play information.

+ Donotattach abit of paper orstidy tapeonit. 72 + Do notexpose a disco a directsunlightor electricheating systems. ce? + Afterusingit, please keep a disc'in a case. = Cleaning Disc + Beforeusingit, please rubit from œænter toward outside with dean dothes. + Do notuse any type ofsolvent such as thinner, benzol (benzene), commercial deaning goods or antistatic sprays. Basicinfonmmation about VCR and Videotape as Tenms related with VCR AFT Automatic fine tuning, a drcuit that automatically adjusts TV reception to optimum condition. CABLE Cable television. Ææ Extended play, the slowest recording speed. Designed to store the maximum amount of program material on à single video cassette, There is some degradation in picture/ audio quality. Index Search A feature of this VCR that automatically records an index each time recording begins. It helps you locate a particular segment of the tape quickly and easily. 1P Long Play, an intermediate tape recording speed that combines most of the picure/ audio quelity obtainable at the standard recording speed with some of the tape economy of Extended Play (EP). osp On-screen display of information pertinent to the features of the VCR. OR One-touch recording, a feature that allows you to record the program you're watching by pressing the REC key. Each press of the key increases the recording time by 30 minutes, up to four hours. RF Radio frequency, the composite audio/ video signal supplied to a TV receiver (or other video component) by an antenna or cable system. Safety tab The plastic tab at the back of a video tape cassette which, when removed, prevents acridental eresure of a recording. se Standard play, the recording speed to use when the best picture quality is of prime importance (and when total recording time is not. En What is dew condensation symptom? + _ Ifa VCRis moved from a cool place to a warm and damp place or à place fading a direct cool wind from air- conditioner.and others, temperature varies Sharply, which makes dew on head drums of VCR. If dew condensation ocouss, 1 Fist tumiton foroneortwo hours beforeusingit.

2. Donotuseit because it may develop troubles of a VCR or videotape.

= How to use a head deaner + Incaseofa old or contaminated videotape, screen may not be dean from the contamination of VCR heads. Please remove contaminants using a head-deaner like below order. 1 Insert a head-deanerinto VCR 2 Press “PLAY” for 5 seconds, and then press “FF” for about 10 seconds. PLAY (Ses) — FF (0secs) 3 Ejectahead-deaner from VCR + Ifthe screen is not dean yet, please repeat the above 2 or 3times more. + À head-deaner is not for sale. Please ask it for the nearest agent. + In case auser ask the removal of contaminants of us, the user should pay extra charges.

Before doubting about troubles (VCR) Symptom Chedks Before doubtingabout troubles (VCR) Chedks “PowerOn” does not work. Please chedk whether a power plugis inserted in an electric outlet. + RecordingaTV progamis impossible.

Forrecording, you should use videotape with a tab. Please check whether a channel is fixer on video. f not, you haveto tumnitinto “TV* by pressing “INPUT” button. Please check whether the timer recording info isight. Are RF cables inputted antenna connection terminal corroctiy? Does a CH number sdlected in display section appear? Please check tab on a tape whether tis broken or not. (Ifitwas broken, plesse scotch-tape it) Check whether a tape attached with a recording tapis inserted. Chek whether the screen is displayed in VCR Only Channel. Press INPUT] button in this remote controller to adjustin “General Broadcast condition. I the rounded line (RF cable) connected in *ANT.IN" terminal? Isthesalected channel number shown in Display? Isatab of cassette tape broken? (Please cover a tab hole with céllophane adhesive tape (Scotch tape)) + Onæ pressing "REC", avideotapeis ejected automatically. Please check whether the dock is right. Does the display on your video show “I " (Ready to timer recording}? Plesse make i out. Please check whether the timer recording info isight. Pleese check a tab on a tape whether is broke or not (IFitwas ‘broken, please scotch-tape it) + Timerrecordingof Cable TV does notwork Was a œble data output code connected correct? Were converter manufacturer setup and output channel right? Did you enter a password? (Please cancel it.) Did you tum of your player? (Please tu iton) + Inspiteof pressing "CHANNEL, a channel can not be set. You may not memorize channds, Please check your channel setting or press a number button. + While duplicating, saeen is not dean and distorted. Sometapes or discs distributed in the market for lending is setto prevent copy in manufacturing, These tapes cannot be duplicated in a good œndition. + remote control does notworkc

Battery may beweak or exhausted. A reoiver of remote control may be different with a sender, + Buftons on remote control do not work. In case a videotape is positioned in the beginning, “VISSREW and “REW" donot work. In case a videotape is postioned inthe end, “FF”, “VISSEF”, “PLAY* and “REC” donotwork. Please check whether another button is pressed. + VISS index search does not work. Areyou playing atape thatis not recorded in this recorder? (Try to record it with the recorder) You may startrecording iin “REC: PAUSE". Please start recording it from stop condition. + doesnotworkevenin Power On”. | > Please check whetheravideotapeis inserted in. > Tiytoinsert aplugagain. + Avideopeis notinputted in. > Plessechedkwhether a power plug isinserted in an electric outlet. > Plesechekwhetheravideotape is in. > Please chekwhether a videotapeis inserted in a right direction (a side of transparent window should be on the upside) > Have you inputted a videotape again just after the tape was gjectod? Please try it again after fully ejecting it. > When avideotape forces to be gjectod, the tape may note inputted. In the case, plesse pull out an ouflet, and then push the tape smoothly. + Oninputtingavidentape thetpeis | > Thats why asafemodeto protect avideotapeis operated re-cjected. automatically. Plesse pull out the tape and input it again. + Avideopeis notejected. > In cæsethe productis used for along time, a videotape may not be ejected for a film inside may be stretchenl In the case, plesse pull out a power plug for about 10mins and then press “EJECT” button. + Admmelonvideoandaplay saeen | > Pleasecheck yourantenna's connection. does not appear. > TV channel should be fixed on video channel. > Plesecherk yourantenna's signal whether may be weëk. In case ofits weakness, please use a frequency amplifier connected with the device. > Pres TV/VCR” anatheletVCR diplaec one display pen. + Noise Gate noise) appears on > Whileinnouse ofVCR wasittumed on? saven. > Wileinrerdinga program, do you walch another channel? > Select TV by pressing [TV/ VCR] button on remote control. + Noiseappeus on sareenañler > Whilein playinga videotape, there may happen some noise orblot recording. in the part of the beginning of a videotape or resuming “PAUSE”, which are not breakdown. + Wileinplaying noise appears > Pleasepress “TRACKING" forbetter screen. Videotape may be poor. Dy to change it to another one. + Sound'and saeenareirregular > Pleaseuse ahead-deanerto dean VCR heads. VCR hoads may be + Sound comes out but screen does not contaminated. + Sang aipesappens. + “Scrven Biror' message is displayed inasacen. + Mhilerecordingand playing thetop | > SncVCRPlay signals arenotstablelike a TV signals, sœreen may of screen extremely waves. beunstable or eurved while in playing. To fx the problem, please horizontal adjustment. + Asaeeisnotdesr > In cæse videotape is the one recorded by other products or old one, stripe may appear on the screen. > Ty to adjustthescreen by [TRACKING+ -] button > Tiytouseahead-cleaner. + Asaeenatpaseistremblinger > Tiytousahosd-deaner. slow screen is not dar: > Ty to adjustthescreen by [TRACKING+ -] button. Please select “CABLE not“NETWORK" from the “CHANNEL SETTING”.

Before doubting about toubles (DVD) Spedfications Symptom Cheks + Therecorder does not play. > If aDVDisfrom oversess itmay notbe played. Plesse check a DVD region code whether it has the relative region code 2 or AIL. > Plecse check whether a DVD isinserted in a right direction. > _IfitisaCD-ROM for PC or DVD-ROM, does not work. + Nosound omesthrough. > Play mode may be“SLOW” orPAUSE"(In abnommal speod play, no sound comes through) Did you connect the parts in right way? Please check the operative condition of TV or amplifier. From SETUP, plesse check “AUDIO” items. A discis playing but screen does not ‘appearor poor saeen appears. Did you turn on your TV sets? Did you connect the parts in right way? ‘The play may bein “PAUSE”. A disc may have some contaminants or be damaged. A disc may be bad one. Power ZW; 50 G0Hz Consumed eectricity Hi-E :25, Mono :25W Weight 4&g Dimension (WxH xD) Am mmx2SEmm Operative temperature HC-40C Installation condition Horizontal / Réative humidity under 80% Signal type PAL COLOR Antenna Input/ output U/ V-mixed: 70 unbalanced VIDEO input 1.Wp-p (unbelanoed, RCA JACK) AUDIO input -BfkiBm, RCA JACK VIDEO output (commonuseof DVD and VCR)| VIDEO output terminal, 1.0 Vp-p unbalanced, RCA JACK, SCART JACK VIDEO output (DVD only) RGBoutput (750 In load R: 0.Wp-p, G:0.7Vp-p, BO.TVp-p) Sounds regular Please chedk the connection with Dolby Digital amplifier. Please check the plugs are connected with one another tightly. Some contaminants may beremained in connection terminal. AUDIO output (common use of DVD and VCR)| Audio output terminal (2 kids): -5.84Bm(VCR), 2Vrms(DVD), RCA JACK REMOTE does not work. Please chock the degree of remote control, distance or any interruption. Battery may be weak or exhausted. When you operate DVD, use it by pressing [DVD] button. Dolby Digital sound does not wok Dolby Digital sound can be worked in the Dolby Digital amplifier only. Piesse check “Dolby Digital * mark on your DVD. In case of playingit through digitl output, while pressing “STOP”, please check whether “Digital Output” is “Bitstream’ by pressing “SETUP”. Please check the connection is correct. “AUDIO” or “SUBTITLE" button does not work. If a DVD does notindude language information, it does notsupport the function. “ANGLE” button does not work “ANGLE" is supported only in a DVD contains multi angle scenes. Also while a DVD isplaying. auser can confirm the support with the “ANGLE” mark on screen. + “MENU” doesnotappearwillea > Plessechedkthe degree of remote control, distance or any DVD is playing. > Plesechek betty in remote control whetheritis exhausted or not.

A DVD may not contain menu information. AUDIO output (DVD on) Anelogue AUDIO output :Z0Vms Digital audio output (OPTICAL, COAXIAL) Playabletape Very High dense tapes wii VHSmas Playable disc DVD, VIDEO-CD, CD (Em), CD (Em), MP3 CDR CD-RW Tape speed 23m s LP: 11 70m s Playime SP: hrs, LP: Ghrs (use ElBDIape) Clock display Ahs Time Recording Bprograms a month Persisience in power failure Inin VIDEO SN (VCR) Over AiB(Sandard recording) Resolution VCR Over A0lines Sandard recording) DVD Over SDDIines (Playback DVD) AUDIO (VCR) Over 65dBH-F), Over 404BMono)

AUDIO dynamicrange CUT] ‘The file name of MP3 (CD-R) appears with Strange letters. “The file name of MP3recognize only the Alphabet (A-Z, a-z), numbers (0-9) and a special symbol on keyboard (-; ! @ #$...) and 10letters can be displayed in maximum. The letters except above æse will be displayed like". Any MP3(CD-R) file isn't displayed. Ifthe surface of disk is injured, the file display and playback can be impossible. m#« DVD Audio output standards