ADDAC320 - Electronics ADDAC System - Free user manual and instructions
Find the device manual for free ADDAC320 ADDAC System in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Eurorack Synthesizer Module |
| Brand | ADDAC System |
| Model | ADDAC320 |
| Width | 12 HP |
| Depth | 30 mm (typical) |
| Weight | 120 g |
| Power Supply | +12V: 80 mA / -12V: 40 mA (typical) |
| Power Connector | 10-pin ribbon cable |
| Functions | Multi-function module: VCA, mixer, envelope follower, and more (configurable via jumpers) |
| Input Impedance | 100 kΩ |
| Output Impedance | 1 kΩ |
| Frequency Response | 20 Hz – 20 kHz |
| Controls | Potentiometers, switches, and CV inputs |
| Maintenance & Cleaning | Clean with a dry, lint-free cloth; avoid moisture and solvents. |
| Safety Warnings | Do not exceed specified power ratings; disconnect before installing or removing. |
| Spare Parts & Repairability | Contact ADDAC System or authorized dealers for genuine parts. |
| Warranty | 2 years limited warranty against defects |
| Operating Temperature | 0°C – 50°C |
| Certifications | CE, RoHS |
Frequently Asked Questions - ADDAC320 ADDAC System
How do I install the ADDAC320 module?
Connect the 10-pin power ribbon to your Eurorack case's bus board, ensuring correct polarity (red stripe aligns with -12V). Secure the module with screws. Always turn off power before installation.
What power supply does the ADDAC320 require?
It requires +12V (80 mA) and -12V (40 mA) from a standard Eurorack power supply. Do not use +5V.
Is the ADDAC320 compatible with all Eurorack cases?
Yes, it fits any case with standard 12HP width and sufficient power capacity. Ensure depth clearance (30 mm).
What functions does the ADDAC320 perform?
It is a multi-function module; typical uses include a VCA, mixer, envelope follower, and bipolar voltage processor, selectable via onboard jumpers.
How do I clean the module?
Use a soft, dry cloth to wipe the front panel and knobs. Avoid liquids and abrasive cleaners.
What is the warranty period?
ADDAC System provides a 2-year limited warranty covering manufacturing defects. Does not cover misuse or modifications.
Can I use the ADDAC320 with banana cables?
No, it uses standard 3.5 mm TS jacks for CV and audio signals.
Where can I find spare parts?
Contact ADDAC System directly or an authorized distributor. Knobs, jacks, and ICs are available.
What does the LED indicator mean?
The single LED indicates signal presence or clipping, depending on jumper settings. Refer to manual for details.
How do I update the firmware?
This module is fully analog and does not require firmware updates.
User questions about ADDAC320 ADDAC System
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Electronics in PDF format for free! Find your manual ADDAC320 - ADDAC System and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ADDAC320 by ADDAC System.
USER MANUAL ADDAC320 ADDAC System
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ADDAC System
Model : ADDAC320
Category : Electronics